2007-2008 Writers Guild of America strike


2007 Hollywood Strike  

282 members have voted

  1. 1. Who do you support in the strike?

    • The AMPTP
      35
    • The WGA
      140
    • Undecided/Don't Care
      107


Recommended Posts

So a little recap of what shows might or will be effected in the near future...

  • Desperate Housewives - Will stop production after Wednesday because they have no more scripts
  • Back to You - Will not return from a planned hiatus
  • The New Adventures of Old Christine - Stopped production already
  • Til Death, Rules of Engagement, Two and a Half Men, & The Big Bang Theory will all stop production shortly
  • Lost - Expected to have eight of 16 episodes prepared, likely to premiere Feb. 8, 2008
  • The Office - One unproduced Office script that's ready to go
  • The Tonight Show With Jay Leno, Late Night With Conan O'Brien, Saturday Night Live, The Daily Show With Jon Stewart, The Colbert Report, Late Show With David Letterman, The Late Late Show With Craig Ferguson - Immediate reruns beginning November 5, 2007
  • Smallville - 15 scripts written, studio expected to produce all
  • 24 - Eight episodes of 24 will be completed
  • Everybody Hates Chris - All 22 episodes of season completed, done with production for season
  • Friday Night Lights - 15 episodes
  • The Shield - All 13 episodes of season six (the final season) will be completed
  • Scrubs - 12 of 18 ordered episodes completed. Series Finale episode could possibly not be produced or broadcast, if this was to happen, series creator Bill Lawrence will try and release a straight-to-DVD final episode.
  • 30 Rock - 9 Episodes Fully Completed; Episode 10 due to be filmed the week that the strike began, it is doubtful that episode 10 will be filmed on schedule due to Star/Writer/Executive Producer of the show, Tina Fey, taking to the picket lines outside of the real-life "30 Rock".
  • Pushing Daisies - The final draft of the ninth episode was turned in by creator Bryan Fuller before midnight on November 4, 2007. As of November 6, 2007, the eighth episode is currently filming. Executive producer Dan Jinks expects to keep the show in production until Thanksgiving.

...more to come as I find the information out :)

This won't last long. Big studios aren't going to watch their wallets empty.

But they're still going to get advertisment revenue from re-runs. And viewers will still tune in just like they do in the summer; it will just be like a long summer of re-runs.

I hope this goes on, and at some point people realize, nobody cares that much.

I'm sure you all like following certain TV shows, but I'm sure you all don't value it that much either.

The TV writers’ strike will enter its third day, Wednesday, without any new talks scheduled between the scribes and producers.

The 12,000 members of the Writers Guild of America were still off the job Tuesday, after declaring a strike Monday, Nov. 5, following failed negotiations with the Alliance of Motion Picture and Television Producers.

The last negotiating session, with a federal mediator present, was Sunday night in California.

The WGA East is picketing at different sites each day this week in New York City. On Wednesday, the writers will be at Chelsea Piers in Manhattan, and are scheduled to move to Time Warner Studios/Time Warner Center on Thursday and News Corp.’s headquarters Friday.

On Tuesday its members were at Silvercup Studios in Long Island City, Queens. On Monday, the first day of the strike, they had been manning picket lines at Rockefeller Plaza in Manhattan, where NBC has offices and studios.

In California on Tuesday, the WGA West picketed 14 sites, including various studios and media-company offices, in the Los Angeles area.

So far, two Democratic presidential candidates have put out statements in support of the WGA: Sen. Barack Obama and Sen. John Edwards.

"The striking Writers Guild members are fighting an important battle to protect their creative rights,” Edwards said. “These writers deserve to be compensated fairly for their work, and I commend their courage in standing up to big media conglomerates. As someone who has walked picket lines with workers all across America and as a strong believer in collective bargaining, I hope that both sides are able to quickly reach a just settlement."

As a result of the strike, late-night shows such as Comedy Central’s The Daily Show with Jon Stewart and The Colbert Report have been forced to go into reruns this week.

The WGA and AMPTP can’t come to terms on compensation for the use on content on new-media platforms, or on whether DVD residuals should be increased.

Source: No New Talks Set In TV Writers’ Strike

and what about us loyal fans and their fan base do the writers care about us?

Oh my! What is with some of you? This is their livelihood we're talking about. Who cares about us right now! Our lives will go on, but out of the 12,000 members most don't make $30,000 a year, why can't these writers try to better themselves? They haven't gone on strike since 1988, they deserve this right now. Why do the companies have to be so greedy?

Those will continue as long as they're not scripted and if they're scripted, then they're not reality.

I rember a few weeks ago TMZ's TV show did a story of one of their "reality" shows, showed a girl being droped off at LAX international then 15 mins came out in diffrent clothes acting like she just arrived. Then another shot of three women walking from a club only to hear the camera man say "lets do that shot again".

MTV... ha

I rember a few weeks ago TMZ's TV show did a story of one of their "reality" shows, showed a girl being droped off at LAX international then 15 mins came out in diffrent clothes acting like she just arrived. Then another shot of three women walking from a club only to hear the camera man say "lets do that shot again".

MTV... ha

There is your 2008 schedule!

Oh my! What is with some of you? This is their livelihood we're talking about. Who cares about us right now! Our lives will go on, but out of the 12,000 members most don't make $30,000 a year, why can't these writers try to better themselves? They haven't gone on strike since 1988, they deserve this right now. Why do the companies have to be so greedy?

You make it sound like they should be awarded for not going on strike for x number of years. In a way, that sounds like union blackmail. How does that justify increases in wages and other benefits? If a certain wage was not fair, individual employees should seek higher wages through their own means. Creating a club where every writer is automatically included may be efficient, but it's an unfair, bullish method. It also stands directly opposed to free-market capitalism that is so widely accepted and cherished in America.

Unfortunately, increasing employee wages has proven to be a very poor method of motivation. Thus, profits and quality of work does not increase, while total costs increase. No rational business would follow this path freely. Of course, a strike like this may force them to increase wages very slightly, but they will attempt to negotiate about other benefits and improvements aside from monetary increases. Again, this union will most likely fail to negotiate rationally or agree on fair terms for a lengthy period of time, until they are simply forced to lower their expectations and finally go back to work because they really start to need $$$. Regardless of what happens, they have the most immediate ability to determine how long this bargaining process will take.

Something else to notice: as with most strikes, communication to the public for reasons and arguments in favour of the union has been ambigious and varied. No press conference, no proper media statements. No proper leadership. However, although the burden falls more greatly on the striking union, neither side has communicated well thus far.

Based on what I've read and heard, the writer's guild should definitely have a better argument than we deserve higher wages because we say we do. This is often a major flaw in striking initiatives. Individual selfishness thrives in ignorance of total welfare and business profits, not to mention real term wealth. Having a higher number in your chequing account does not automatically make you better off. Based on the size of the industry, if the sort of hefty increase of wages that unions generally seek was to be agreed on, prices of many good and services would increase in parallel, although probably with variation and latency throughout different market segments. That means the US dollar would fall even further and nobody would have any more wealth in real terms.

If the argument they make is that they deserve higher wages, they have to clearly explain why. Is it because the producing companies and employess have much higher wages than writer's? If that is true, what is the evidence? Moreover, should there be a parity between production company total wages and writing employee total wages? It seems that logically, all that is required to write a script is time and talent (and writing tools). Producing a movie takes a lot more than that. Which indicates that total wage disparity is relatively fair between production and writing employees. Furthermore, even if the production companies had such high profit margins that they should be handing out higher wage contracts to writers and decreasing wages for some production employees, why should consumers and customers suffer in the interim of the strike? Is it fair to damage the film and television industry in an attempt to create more fair wage distribution in production and writing contracts? These are difficult questions to answer. However, without some answers, this strike deserves absolutely no support and their arguments are thin and shallow.

As a member of the general public, you have to be aware that as a result of reasonable non-satiation, no average employee would rationally not vote for wage increases. Generally, unions help organize and attempt to justify (although often failing or using false arguments) this non-satiety through a strike like this.

<extreme personal opinion starts> Based on the ocean of sh*t that has plagued the television and film mediums in recent years, it's very difficult to be sympathetic to the writer's guild. Maybe that's why most of the 12,000 employees receive 30K or less. They simply deserve it. <extreme personal opinion ends>

Edited by illz55

^ It doesn't matter if the majority of the stuff coming out of Hollywood is "****". There are still people watching it and the creators still deserve to get paid. If the "fans" really had a problem with the content coming out of Hollywood they'd stop going to see the stuff.

I don't think you understand what's at stake here. They're not asking for more money for their work, they're asking what is due to them. "New media" residuals is going straight to the studios bottom line, not to the creators of the content, the actors, or even the directors. You don't get it. Most of the writers don't make a lot of money on writing, very few actually make a living off of writing, out of the 12,000 members of the WGA.

On top of that, a lot of the "****" that comes out of Hollywood, a lot of times it is the studios who get that put together. Some producer has an idea and they hire a writer to write and then the producer has him change it to "****". You can't always blame the writer for that sort of stuff, the director has a lot of leeway to change content while filming, so there's a long process from penning a script to seeing it in the theaters or on TV where a lot of stuff can change.

But that still isn't the point, the point is when someone goes and buys something from iTunes or Amazon's Unbox they are pay directly to the studios bottomline. When you go to NBC's website to watch a missed episode of Heroes, there's ads and the studio is the one getting the money, not the writers, directors or actors. They deserve the money that's owed to them!

EDIT: Also, most of the writers that make the millions (which is an extremely small amount) are the ones IMO that write pure crap.

Canadian writers told to down pens on U.S. work

The Writers Guild of Canada (WGC) is telling its members not to accept work from U.S. producers looking to replace striking American writers.

"Their fight is our fight," the WGC said in a notice to its members. The notice went on to explain union rules on how the strike by the Writers Guild of America (WGA) against the Alliance of Motion Picture and Television Producers effects WGC members. The strike in the United States mainly revolves around the amount of payment writers receive for sales of films and TV shows on DVD and other types of digital distribution. The Canadian guild said that "the issues the WGA is addressing will affect every professional artist seeking compensation for their work in the digital age."

Under Canadian rules, writers who belong to both the Canadian and American guilds and who live in the U.S. have to abide by the American strike rules. Dual members of both unions who reside in Canada can work for Canadian productions, but a WGC member in Canada cannot accept work from U.S. producers.

A spokesman for the WGC noted that U.S. productions shooting on location in Canada, such as the TV series Battlestar Galactica, tend to have American writers. So those productions will be affected.

Representatives of the WGC argued that negotiators for the producers in Los Angeles "had complete disregard for our colleagues' bargaining issues" and that, "as a sister guild and fellow member of the International Affiliation of Writers Guilds, we will support the [WGA] during its strike to the fullest extent possible."

In the U.S. yesterday, the production of three sitcoms was halted because of the strike, networks said. Back to You, starring Kelsey Grammer and Patricia Heaton, will not return from a planned hiatus today, said Chris Alexander, a spokesman for 20th Century Fox Television. In addition, the sitcoms 'Til Death, which airs on Fox, and Rules of Engagement, on CBS, will also stop production immediately because of the strike. The shows are typically written the same week they are filmed, with jokes being sharpened by writers even on the day of production.

Source: http://www.theglobeandmail.com/servlet/sto...ertainment/home

So a little recap of what shows might or will be effected in the near future...
  • Desperate Housewives - Will stop production after Wednesday because they have no more scripts
  • Back to You - Will not return from a planned hiatus
  • The New Adventures of Old Christine - Stopped production already
  • Til Death, Rules of Engagement, Two and a Half Men, & The Big Bang Theory will all stop production shortly
  • Lost - Expected to have eight of 16 episodes prepared, likely to premiere Feb. 8, 2008
  • The Office - One unproduced Office script that's ready to go
  • The Tonight Show With Jay Leno, Late Night With Conan O'Brien, Saturday Night Live, The Daily Show With Jon Stewart, The Colbert Report, Late Show With David Letterman, The Late Late Show With Craig Ferguson - Immediate reruns beginning November 5, 2007
  • Smallville - 15 scripts written, studio expected to produce all
  • 24 - Eight episodes of 24 will be completed
  • Everybody Hates Chris - All 22 episodes of season completed, done with production for season
  • Friday Night Lights - 15 episodes
  • The Shield - All 13 episodes of season six (the final season) will be completed
  • Scrubs - 12 of 18 ordered episodes completed. Series Finale episode could possibly not be produced or broadcast, if this was to happen, series creator Bill Lawrence will try and release a straight-to-DVD final episode.
  • 30 Rock - 9 Episodes Fully Completed; Episode 10 due to be filmed the week that the strike began, it is doubtful that episode 10 will be filmed on schedule due to Star/Writer/Executive Producer of the show, Tina Fey, taking to the picket lines outside of the real-life "30 Rock".
  • Pushing Daisies - The final draft of the ninth episode was turned in by creator Bryan Fuller before midnight on November 4, 2007. As of November 6, 2007, the eighth episode is currently filming. Executive producer Dan Jinks expects to keep the show in production until Thanksgiving.

...more to come as I find the information out :)

Adding...

  • Boston Legal - 14 or 15 episodes will be completed.
  • Cavemen - 12 of 13 episodes have been completed.
  • Heroes - New scenes were shot for episode eleven that enabled it to function as a season finale, rather than just the conclusion to 'Volume 2' and a mid-season finale as was originally intended by the producers. Additional episodes of 'Volume 3' were in the can before the strike began.

Stephen Colbert is the biggest cop out of them all... I don't see Big Pappa Bear Bill O'Reilly shutting down The Factor because his writers left. Colbert could go try going funny on real news and see how that works out for him.

There's a little difference there though. O'Reilly is opinion news (which the writers aren't under the same union) and Colbert is a comedian and his writers do work for the WGA. Most comedians now days don't write their own stuff. Sad, but true.

There's a little difference there though. O'Reilly is opinion news (which the writers aren't under the same union) and Colbert is a comedian and his writers do work for the WGA. Most comedians now days don't write their own stuff. Sad, but true.

Yeah I saw Leno on the news giving out Donuts and admitting he doesn't write his own stuff.

and what about us loyal fans and their fan base do the writers care about us?

Sure, they "care" about you. But not enough to work for free.

Would you work for me (for no money) just because you cared about me? If so, you're hired!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • These are not "great" prices... just "less awful". Apparently "Those who forget the past are doomed to pay higher prices and think they've won."
    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!