2007-2008 Writers Guild of America strike


2007 Hollywood Strike  

282 members have voted

  1. 1. Who do you support in the strike?

    • The AMPTP
      35
    • The WGA
      140
    • Undecided/Don't Care
      107


Recommended Posts

I am curious to see how Leno and Conan will perform tonight since they will have no material to work with.

I'm very interested in that as well. I'm going to DVR Leno and Conan tonight and watch Letterman to see how they all do since it has been so long since their departure from the air.

I'm very interested in that as well. I'm going to DVR Leno and Conan tonight and watch Letterman to see how they all do since it has been so long since their departure from the air.

I watched the first part of Conan, and given the circumstances, he did pretty well. I laughed quite a few times.

I dvr leno and letterman and lettermen was the best out of those two and no I didnt care to see conan or the late late show on cbs or carsons daily show on nbc.

Letterman was better because his writers were back, but Leno was pretty good from what I saw.

Robin Williams was hilarious! I couldn't stop laughing.

Variety reports that Fox is bracing for a lengthy Writers Guild strike by tweaking its midseason schedule.

Newcomers "New Amsterdam" and "Canterbury's Law," which had initially been given premieres on Friday night -- arguably Fox's weakest -- will now bow in safer Monday-night slots in spring.

Fox has also added several Thursday-night installments of "American Idol" and will hold back the new reality entry "When Women Rule the World," most likely until summer.

Besides "Amsterdam" and "Canterbury's Law," Fox is bowing new scripted series "Terminator: The Sarah Connor Chronicles," "Unhitched" and "The Return of Jezebel James" in midseason.

As scheduled, Mondays will consist of "Prison Break" and "Terminator" until the end of February; both "Terminator" and the second half of "Prison Break's" third season premiere Jan. 14. "Prison Break" airs its final episode on Feb. 18, a special "Moment of Truth" runs on Feb. 25, and the two-hour "Terminator" finale airs on March 3.

Then, on March 10, "House" begins a run of repeats Mondays at 8, followed by "New Amsterdam's" regular timeslot debut at 9. "New Amsterdam" actually gets two previews beforehand, on Tuesday, March 4, and Thursday, March 6, at 9 p.m., behind two "Idol" editions. "New Amsterdam" finishes its run on April 7 with a two-hour finale; then, on April 14, "Canterbury's Law" bows at 9.

Fox is also shuffling its comedies around, scheduling original episodes of "Back to You" behind 90-minute "Idol" editions on Tuesday, Feb. 26, Wednesday, Feb. 27, and then again on Tuesday, March 25. The show moves to its regular spot, behind "Idol" results shows, on Wednesday, March 19.

"'Til Death," meanwhile, returns with new episodes on Friday, March 14, at 8 p.m., followed by newcomer "Jezebel James" (which also gets a one-time post-"Idol" preview on Wednesday, March 12) at 8:30 p.m.

On Thursdays, Fox will run "Idol" at 8 p.m. on Feb. 21, 28 and March 6; after that, starting March 13, "Are You Smarter Than a 5th Grader?" runs at 8 p.m., with "Don't Forget the Lyrics" at 9.

"Bones" repeats will air Fridays at 9 p.m. starting March 14 (after a few weeks at 8 p.m.).

A side note about House. It will return with three new episodes starting Jan. 29.

Wow, there's 3 people here who agree with the AMPTP according to the poll. I hope they come in and discuss why.

You know they won't they are scared of you ;)

I watched Leno and Lettermen for the first time in a few years last night (mainly because Daily Show/Colbert Report arn't back yet). I was a little surprised, I really couldn't tell the difference between Dave with writers and Jay without, both shows were just as bad.

With Nods to the Strike, Late-Night Hosts Return

Eight weeks after their writers went on strike and plunged their shows into reruns, Jay Leno, David Letterman and Conan O’Brien returned to late-night television Wednesday with original shows in which both the Iowa caucuses and the new facial hair on two of the hosts loomed large.

Mr. Letterman, who sported a thick beard as gray as Mr. O’Brien’s was red, was planning to open Wednesday night’s show with a joke delivered not by him but by Senator Hillary Rodham Clinton via satellite from Iowa, where she was campaigning for the Democratic presidential nomination.

“Dave has been off the air for eight long weeks due to the writers’ strike,” Mrs. Clinton said, in a bit that was inserted into the opening of “The Late Show” on CBS early Wednesday evening, after the host had concluded his late-afternoon taping. “Tonight he’s back. Oh well. All good things come to an end.”

On the “Tonight Show” on NBC, Mr. Leno interviewed Mike Huckabee, the former governor of Arkansas, who is seeking the Republican nomination and who, during a break in the taping, picked up an electric guitar to play with the band.

But the biggest difference among the late-night shows, both on camera and off, was this: Mr. Letterman, whose “Late Show” is on CBS at 11:35, was able to draw on his full writing staff because of a deal reached Friday between his production company, Worldwide Pants, and the Writers Guild of America. He performed his usual monologue and “Top 10” list.

By contrast, Mr. Leno, whose show comes on at 11:35 p.m., and Mr. O’Brien, whose “Late Night” follows an hour later, went on without the benefit of their writing staffs, as did Jimmy Kimmel on ABC at midnight. Their writers, all members of the Writers Guild of America, remain on strike. But Mr. Leno still presented a full monologue, one that stretched to nearly 10 minutes.

“A Jew, a Christian and a Muslim walk into a bar,” Mr. Leno said. “The Jew says to the Muslim — see, I have no idea what they say, because there’s a writers’ strike.” Later, Mr. Leno took a characteristic gibe at his network, saying, “There are more people picketing NBC than watching NBC.”

Mr. O’Brien did less of a monologue and spent more time finding ways to improvise on camera. He had someone clock how long he could spin his wedding ring on his desk (36 seconds) and made a running gag of sipping water from a mug. “That’s good water,” he told the audience, adding, “Killed some time.”

Mr. Leno’s studio in Burbank, Calif., and Mr. O’Brien’s at 30 Rockefeller Plaza in Midtown Manhattan were picketed by writers’ guild members yesterday. But in both cases, the protesters took pains to emphasize that their quarrel was with NBC and its parent company, General Electric, and not the hosts themselves. Among the guests who crossed the picket lines were the comedian Bob Saget, who nervously told Mr. O’Brien that he was a guild member, and the TV chef Emeril Lagasse, who joined Mr. Leno.

Both of the late-night shows on Comedy Central, “The Daily Show With Jon Stewart” and “The Colbert Report” with Stephen Colbert, are scheduled to return Monday. Those shows have also sought to reach interim agreements with the guild, similar to the one struck by Mr. Letterman. Representatives for the shows and the guild met Wednesday, but no deal was announced.

Mr. Letterman devoted much of his show to the strike, in which writers for both television and movies are seeking more money from distribution of their material via the Internet and other new media. He opened the taping by passing through a chorus line of long-legged showgirls clad in white tie and bearing placards that read, “Writers Guild of America on Strike.”

The most unusual moment came during his regular “Top 10 List,” when 10 striking writers — including those from Mr. O’Brien’s show, “The Daily Show With Jon Stewart” and “The Colbert Report” — presented tongue-in-cheek demands of their employers.

(No. 2: “I don’t have a joke — I just want to remind everyone we’re on strike, so none of us are responsible for this lame list,” said Chris Albers of “Late Night With Conan O’Brien.”)

Mr. O’Brien and Mr. Letterman also sought to wring humor from the beards they grew while being sidelined during the strike. Mr. O’Brien had a camera come in tight while a band member crooned, “Strike beard,” followed by “I love you.” Robin Williams, Mr. Letterman’s first guest, addressed him initially as “General Lee” and then “Rabbi.”

Mr. O’Brien, a former writer for “Saturday Night Live” and “The Simpsons” who, like Mr. Letterman and Mr. Leno, is a guild member, also made reference to the strike on his show.

“We’re back now but sadly, we do not have our writers with us,” he told his audience. “I want to make this clear: I support their cause. These are very talented, very creative people who work extremely hard, and I believe what they’re asking for is fair.”

The guild has said it will try to prevent guests from Hollywood and elsewhere from appearing on shows that are still subject to the strike and has said it will monitor the material performed on those shows to assure that it is not something a writer, or the hosts themselves, could have written in advance. Mr. Leno said that the union rules allowed him to write jokes for himself. “I write jokes and wake my wife up in the middle of the night and say, Honey, is this funny,” he told the audience.

Before Mr. Leno’s taping, Sherry Goldman, a spokeswoman for the Writers Guild of America East, said: “If we think there are things to question, someone will bring the question before the council of the guild. They could be subject to action by the disciplinary committee.” She did not specify what form that discipline might take.

The writers guilds, meanwhile, rebuffed an eleventh-hour bid by the Hollywood Foreign Press Association to ward off picketing of its Golden Globes ceremony, which is set for broadcast by NBC on Jan. 13.

Hollywood publicity executives have said they expect stars to avoid the Globes if writers picket. The association has been considering a plan to stage the ceremony without a telecast to avoid confronting striking writers.

In a statement, Alan Rosenberg, president of the Screen Actors Guild, said his union planned to meet with Golden Globes actor-nominees this week.

I read in The Sun a couple of days ago that these writers are striking because they're ****ed off about seeing their shows streamed online. If that's true, what a bunch of babies! Musicians don't strike because their work is being streamed on YouTube through videos!

BTW, please don't start the "you been living under a rock?!" comments. I don't live in America, so I don't really care about what's going on there, except for wrestling.

I read in The Sun a couple of days ago that these writers are striking because they're ****ed off about seeing their shows streamed online. If that's true, what a bunch of babies! Musicians don't strike because their work is being streamed on YouTube through videos!

BTW, please don't start the "you been living under a rock?!" comments. I don't live in America, so I don't really care about what's going on there, except for wrestling.

You obviously do not know the real reason behind the strike. Online streaming is one part of the argument, but not because it's happening, but because they make no money from their works with it. Again, that's only one part of their cause to strike.

The fact is with no shows now, they aren't getting paid for the second half of the season, thus are losing even more money. That makes no sense

They're still getting paid for reruns of their shows, DVD sales, etc. So the writers are still making money. The point is, with any strike, you are more than less fighting for future generations of writers. The lost revenue is a sacrifice they were all aware of when they voted to go on strike.

You obviously do not know the real reason behind the strike. Online streaming is one part of the argument, but not because it's happening, but because they make no money from their works with it. Again, that's only one part of their cause to strike.

Exactly. There is a huge difference between YouTube and NBC.com.

When music is used in a video on YouTube (which is technically illegal by the way), the musicians don't get paid, but neither does the studio that produced and distributed that music.

When you watch an episode on NBC.com of whatever show, NBC gets paid ad revenue because they place ads every so often during the playback of the episode. The writers get nothing.

This isn't rocket science people. It is simple numbers, NBC = money; Writers (the actual labor works of those shows we love to watch) = nothing.

Zero cents makes zero sense.

Edited by Hurmoth

You get paid for a service, once you complete the service, the company can do whatever they want with it. Am I supposed to pay my auto repair shop everytime I use my brand new brakes at a stoplight? These people need to get over it. It's selfish when their are millions who wish they were in a position to have big time writing jobs. They make plenty enough. This is just milking it for all its worth.

Why should writers get paid if any tv producer decides to stream online, they are paid to write storys, not so they get a cut from every little damn thing.

I hope they all get fired.

:laugh: Wow. Have you ever worked in a union before? I'm starting to wonder if you guys know anything about the way the world in the film/tv industry works.

Writers, actors, directors, etc. have always been paid residuals on content they've created.

Definition of a residual for those who don't know: repeat fee: a payment to performers, directors, or writers when their filmed work is shown again, especially on television.

Eventually all the content we see on TV will be fully moved to the internet, our TVs will be connected to the cloud and if they don't get this put their contracts now they may not get it for years and years to come. They'll end up losing millions.

I hope you're never in a situation where someone can say they hope you get fired, that's just plain immature.

Why should writers get paid if any tv producer decides to stream online, they are paid to write storys, not so they get a cut from every little damn thing.

I hope they all get fired.

I hope they get fired too. To me the whole thing is just crazy that they are doing this in the first place. TV as a whole has gone down drastically as to what is even watchable. Most programs copy each other in some way or the writing is just horrible and like on some shows they never get past the a certain plot. If TV was so worth it, I could see them going on strike but as it stands now it is a bunch of crap for the most part.

I hope they get fired too. To me the whole thing is just crazy that they are doing this in the first place. TV as a whole has gone down drastically as to what is even watchable. Most programs copy each other in some way or the writing is just horrible and like on some shows they never get past the a certain plot. If TV was so worth it, I could see them going on strike but as it stands now it is a bunch of crap for the most part.

Even the richest of the rich need more money....lol..I say get over it :) The internet is not TV... for many many reasons.

Next they will want money every time I put a DVD in my DVD Player.

Even the richest of the rich need more money....lol..I say get over it :) The internet is not TV... for many many reasons.

Next they will want money every time I put a DVD in my DVD Player.

You do realize that the majority of the 10,500 writers, the majority of them don't make $30-40K a year, right?

You people need to get the facts before you start forming opinions it seems.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      222
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!