Choppy / glitchy audio in Vista


Recommended Posts

I'm having this problem since vista release. I have updated my audio drivers whenever a new set is out without any luck.

I have Realtek onboard sound and i only use the digital output to connect my PC to a Home Theater via optical fiber cable.

The audio in games and music players stutters every x minutes for a second or two and the cycle start again and again. It is weird but it seems that this sttutering happens to many people...

OK lets go back a few... you have onboard audio on that motherboard, its a good onboard audio and to be honest, Realtek provide a hell of alot driver support than Creative

Pull out the audigy , re enable your onboard audio , install latest realtek drivers http://www.realtek.com.tw/downloads/downlo...p;GetDown=false

Lets see if this helps.

While here... I cant seem to find the quadro nvs 210s chipset on nvidia site, anyone knows why? - k I found out it is actually nforce 430 with 6100 gpu... nice thing for nvidia to call this quadro....

hmmm, reading a bit more info on neowin and the net, this isnt sound related but prolly chipset related, I think all the problems coming from nforce 4 series and below.

OK, right now I believe you are basically screwed, there is no fixing for your problem because nVidia should be slapped with a lawsuit for lack of support for slightly older chipsets.

Edited by Beastage
OK lets go back a few... you have onboard audio on that motherboard, its a good onboard audio and to be honest, Realtek provide a hell of alot driver support than Creative

Pull out the audigy , re enable your onboard audio , install latest realtek drivers http://www.realtek.com.tw/downloads/downlo...p;GetDown=false

Lets see if this helps.

While here... I cant seem to find the quadro nvs 210s chipset on nvidia site, anyone knows why? - k I found out it is actually nforce 430 with 6100 gpu... nice thing for nvidia to call this quadro....

hmmm, reading a bit more info on neowin and the net, this isnt sound related but prolly chipset related, I think all the problems coming from nforce 4 series and below.

OK, right now I believe you are basically screwed, there is no fixing for your problem because nVidia should be slapped with a lawsuit for lack of support for slightly older chipsets.

well in a year or so I wanted to build a new system anyway

Quad Core

4 + gigs of ram

I get this also. Although, it is bareable and doesn't happen very often in the least. It seems to happen most when I'm playing Chess Titans (With all the fancy graphics on max.)

Doesn't happen at all in video games like CS: S.

I remember trying Frets on Fire and it was horrid.. the common attribute here is that both Chess Titans and FoF were running in a window.

I've got the latest drivers, video, audio, network.

A reboot might help with CoolCatBad's fix. Will post more later.

Edit: This is on a Dell XPS M1530, using the built-in audio device.

Well in a stroke of luck, I decided to install audacity and try that instead. That was Perfect!... well other than the fact that sometimes when I would click stop the program would crash. But the recording sounded just PERFECT!.

Did you say that you couldn't set the min/max CPU percentage in power management? I also have an x2 4400+ and I have the setting available. This won't help you, but I found an article about this:

http://windowsvistablog.com/blogs/windowsv...ing-issues.aspx

Are you using the nforce chipset drivers or just the default MS provided? I never installed nvidia's due to all the horror stories about them.

Did you say that you couldn't set the min/max CPU percentage in power management? I also have an x2 4400+ and I have the setting available. This won't help you, but I found an article about this:

http://windowsvistablog.com/blogs/windowsv...ing-issues.aspx

Are you using the nforce chipset drivers or just the default MS provided? I never installed nvidia's due to all the horror stories about them.

I'm actually using the Nvidia ones. But I've tried both. Also I think my processor is the 4600, I think.

  • 1 month later...

This is my first post on Neowin so go easy, I am having similar problems with the sound on Windows Vista as in a 2 second delay of garbled sound. I have installed the latest drivers for my audio (realtek version 1.92), video and motherboard. I have also put SP1 on but its still glitchy. I don't know what else to do.

Could it be the recording settings conflicting with vista's output settings?

I would really appreciate some help, or microsoft in releasing the second service pack for vista...

This is my first post on Neowin so go easy, I am having similar problems with the sound on Windows Vista as in a 2 second delay of garbled sound. I have installed the latest drivers for my audio (realtek version 1.92), video and motherboard. I have also put SP1 on but its still glitchy. I don't know what else to do.

Could it be the recording settings conflicting with vista's output settings?

I would really appreciate some help, or microsoft in releasing the second service pack for vista...

I have the same issue. I also updated the drivers for both my graphics card and sound card. No improvement.

lol. 2 one post wonders in a row.

I've been having this problem too. It seems to happen the most in itunes, but not as often in WMP. I remember reading somewhere that it has something to do with the wireless network adapter, so I updated my driver and even eventually tried disabling the wifi... both no good.

I get issues due to the graphics card driver. I had flawless playback on the last Beta nVidia driver, but the new WHQL ones give me choppy audio. I know it has something to do with the graphic rendering. If I make my browser window smaller (I have a 1680x1050 resolution), the issue temporarily disappears. However, I like my maximised window so hopefully this is only a temporary workaround.

Similar problem here. I have nVidia nForce4 SLI chipset and use built-in Realtek ALC850.

Thanks for the tips, I'll try to experiment?disable one network card I don't use, remove nVidia chipset drivers and cool'n'quiet feature.

Just which network card to disable: nVidia or Marvell Yukon 88E8053?

Try going to your sound options [in control panel] and reducing your sound sampling quality.

On default its at dvd quality, but sometimes due to drivers and stuff this is changed to studio quality. Reducing it down to CD quality, which is pretty much what your listening to with MP3 and stuff, will reduce the load on your soundcard and this problem should go

Everything is new in my PC as I have just rebuilt it, so I doubt it could be the SATA cable but I have double checked the connection just in case and changed the cable with a spare I had. I have tried dumbing down the quality of the playback to CD but it seems to make things worse. This is mostly happening when I am using itunes, however, I was testing it by playing Quake 4 last night and it seems to be working fine. Could it be something to do with the media player that I am using?

I also had the same problem with Windows XP so that was the main reason I wanted to upgrade to Vista and get new bits for my rig.

I am racking my brains as in what to do with this diellema! Any Suggestions?

:crazy: Annoyed :angry:

Windows Vista 64 Bit Ultimate Edition SP 1

AMD Athlon 64 X2 Dual Core Processor 5600+ 2.90 GHz, 2.00 GB Memory, GigaByte GA-K8N Pro-SLI, ATI HIS 3870 Pro, 500 GB SATA Samsung HDD.

Edited by Innesi874
When ever I play music or videos the audio sort of gets studders or skips for just a split second every 10 seconds or sometimes sooner, its really quite annoying and below are the things i've tried to correct the issue

1) Updated all my drivers for chipset, graphics cards, nics sound card, SATA drivers

2) Tried multiple sound cards, 3 infact, 1 was a Soundblaster Live 5.1, the other was a Soundblaster Audigy SE and the other one was some 5.1 sound card can't really remember the name.

3) Tried that fix where you go into the processor power managment but my x2 4600 doesn't have that

4) i've tried differnet media players all the with same results

5) Tried going in and turning off some of the enhanced features for the sound card, but mine doesn't give me that option

6) Checked the device manager to see any spikes in CPU ussage durring the studder, and there are none.

my current setup is this

AMD Athlon 64 X2 4600+ Windsor 2.4GHz Socket AM2 Processor

MSI K9NBPM2-FID AM2 NVIDIA Quadro NVS 210S motherboard

BFG Tech BFGR7950512GTOCE GeForce 7950GT 512MB 256-bit graphics card

Kingston HyperX 2GB (4 x 512MB) 240-Pin DDR2 SDRAM DDR2 533

Seagate Barracuda 7200.10 (Perpendicular Recording) ST3250620AS 250GB 7200 RPM SATA 3.0Gb/s Hard Drive

Windows Vista Busness

Just wondering if anyone else has had these problems or knows of a solution, hopefully this gets fixed in sp1 or a monthly update, because after searching the web, its pretty common.

Thanx

Adam

going into control panel\sounds\ double click your audio device \ click the enhancements tab and check "disable all enhancements" worked for me

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
    • Why would any self-respecting intelligent person follow any recommendation by Donald's GOP administration? With almost two years of fabrications, deceit, and blatantly illegal behavior, why believe them now? They had best be gone after the November 2026 election, so we'll wait and see.
    • AltSendme 0.4.1 by Razvan Serea AltSendme is a minimal, cross-platform application designed for fast, secure, and private peer-to-peer file transfers. It allows users to send files or entire directories directly between devices without relying on cloud servers, accounts, or any personal information. Everything is encrypted end-to-end using modern protocols like QUIC and TLS 1.3, ensuring both strong security and low-latency performance. Transfers are verified with BLAKE3 for data integrity, and interrupted downloads automatically resume, making the experience reliable even on unstable connections. You can transfer anything—images, videos, documents, and more. Integrity checks are performed on both ends, so your files are automatically verified for correctness during both sending and receiving. AltSendme works seamlessly across local networks or long-distance links, capable of saturating multi-gigabit connections for extremely fast delivery. With built-in NAT traversal and encrypted relay fallback, it connects devices almost anywhere. The app integrates with the Sendme CLI and will soon support mobile and web platforms. Fully free and open-source, AltSendme offers a lightweight, privacy-first alternative to traditional cloud-based services, removing size limits, upload costs, and unnecessary data exposure. AltSendme 0.4.1 changelog: Release Highlights Self-hosted relays: Run your own iroh relay so transfers don't rely on public infrastructure. Includes a full deployment template in deploy/relay/ with Docker Compose for a VPS and configuration examples for production use. Fly.io support: One-click deploy template for Fly.io, including a quick-start config (fly.dev.toml) for testing without a custom domain, plus production setup with Let's Encrypt and your own hostname. Relay settings UI: New Settings → Network panel to choose how AltSendme connects: automatic public relays, custom self-hosted URLs (with optional auth token), or disabled. Test connections, verify latency, and see live relay status in the footer. Disable relays: Turn off relay servers entirely when you only need same-network transfers (e.g. LAN). Direct connections only. No relay hop required when devices can reach each other. Android graduates from beta: Android is now part of the regular release cycle alongside desktop. APKs ship with each version (universal, arm64, and armv7). Other improvements Private relay access control via shared auth token Relay fallback notifications when a custom relay is unreachable Broadcast mode toggle in sharing settings Android release build fixes (split-per-ABI APKs, universal APK preservation) UI polish: mobile safe-area insets, dropzone layout, transfer progress animation Bug fixes for minification-related serialization issues and system tray icon loading What's Changed feat(relay): add relay status functionality and settings UI (a120cdf) feat(relay): implement custom relay server configuration and verification (51276c7) feat(relay): add configuration for private relay access and enhance observability features (48fbabf) feat(relay): enhance relay URL validation, display connection status (d4fffa0) feat(relay): add RelayChangeGuard component and enhance relay-related translations (16ba514) feat(broadcast): add toggle setting for broadcast mode in sharing UI (ca6d977) fix(relay): correct QUIC discovery port, pin image, templatize fly.dev (52a2ba5) fix: More broken serialization due to minification (67491a9) fix(android): preserve true universal APK across per-ABI builds (e9f256f) fix(ui): conditional safe-area insets padding on mobile (1182f0e) refactor(transfer): CircularRing component animation fix (944572b) chore(android): drop x86 and x86_64 release APKs, keep universal+arm64+armv7 (34ada0b) Download: AltSendme 0.4.1 | ARM64 | ~9.0 MB (Open Source) Download: AltSendme for MacOS | Android Links: AltSendme Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You are mostly right about the ephemeral nature of it. As I mention in the article, if you dont add a second device or take a backup of your account before uninstalling it, then yes you will lose access to your account. That said, in terms of actual user experience when you sync multiple devices your message history carries across and there's also a Saved Messages chat like there is on Telegram to send messages and attachments between your installs. But yh, what you point out are correct and its not trying to emulate Messenger or Telegram.
    • OK so SearXNG is a meta search engine that you can install locally or use via a public instance. It scrapes other search engines which you choose and then sorts the results. Not as complicated as multiple relays
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!