Disable internet for a computer but allow network: sharing, print etc?


Recommended Posts

Hi all. I have a home wireless network set up through a router in my house. I have a couple of computers that have complete wireless access - I.E. file sharing, printer sharing, internet, etc.

But now what I'm looking to do is to add a computer to the network, but disallow it internet access. Just the one computer. However, I do need this computer to be able to access shared folders on the network, shared printers, and any other available network resources.

Is there some kind of hackish fix for this, some setting on the computer or on the router (router would be best) to accomplish this? I've read you can do it by setting no gateway on the computer... is this valid?

Thanks for your help in advance :)

Thanks, I see a page in my router that has a Block Services option but I don't see anywhere an option for Internet. I see HTTP in the service list but I figured that would be like an Apache server on the computer... or am I wrong? If I am that's the solution I'm looking for.

  kevinmd88 said:
Hi all. I have a home wireless network set up through a router in my house. I have a couple of computers that have complete wireless access - I.E. file sharing, printer sharing, internet, etc.

But now what I'm looking to do is to add a computer to the network, but disallow it internet access. Just the one computer. However, I do need this computer to be able to access shared folders on the network, shared printers, and any other available network resources.

Is there some kind of hackish fix for this, some setting on the computer or on the router (router would be best) to accomplish this? I've read you can do it by setting no gateway on the computer... is this valid?

Thanks for your help in advance :)

assign a static IP and don't enter any DNS servers or change the routing table so that the default route doesn't point to the right gateway. quick and dirty way and would be easy to work around - i guess it depends upon who will be using it and whether or not they will try to get around your restrictions.

The routing table works like a charm :) Thanks! I think that's the method I'll use until either I get a new router or I figure out a setting in it that will do this more efficiently. I know he won't be able to figure out how to change the routing table for sure (he wouldn't even be able to figure out how to change the gateway if I left it blank in the properties :) ) but the only thing I worry about are his friends. I don't think any of them know how to do this kind of stuff, I am pretty sure they don't but I'd rather be safe than sorry.

Thanks to everyone who posted for your help!

Whats the model number of your router - then we can lookup if your router supports blocking internet access.. Most any decent router would support this. But without a model number, its impossible to know what features supports or does not support.

An what version of the firmware are you running? As of yesterday does not give the version number, over the years I have come to understand that users version of lastest, an the actual latest version of the firmware rarely matches up ;)

It's just easier for everyone involved to just give the actual number!

Why do people continue to buy such crap devices?? The feature set of that router is a complete an utter joke. That being said, you can still accomplish what your wanting to do.. Just setup tcp ports 1-65534 and udp 1-65534 as user defined services an then block those by the IP address of the machine you do not want to access the internet.. An they yes make sure you set a reservation for that machine or set up its IP static.. the details of doing that are on page 4-4 of the manual.

Since it does not seem to allow blocking access by mac. An since it would be possible for them to change their IP quite easy -- maybe setting a route on their machine might be harder for them to figure out ;)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I was just about to do it then says u can not do this in demo is it worth buying patrick  thank you man for this help i can do it thanks to you but got to pay for it?
    • Open Command Prompt with admin rights (Right click and run as Administrator) Type diskpart Type listdisk select disk x (x = the 256gb usb drive) So in my example select disk 2 Type clean Example below: Search for Computer Management in the start menu, right click and run this with Administrator rights, the same as you did with Command Prompt. Go to Disk Management and right click on the USB drive. Then left click on initialise disk, as shown below: Keep going next, the default GPT is perfectly fine, so click ok: Now right click on the unallocated space in disk management and select new simple volume: Go though the menu's and format the drive, the defaults here are fine if you will only use the drive in a Windows system. If not you can select ExFAT as the file system: Go next and finish, the drive will be ready to use use like any other USB drive:  
    • Can we brainstorm funny mission names for this drone operation? Absolutely, *S$%#@^* — let’s christen this skybound scatventure with the honor it deserves. Here’s a flight manifest of mission names, ranging from mildly irreverent to dangerously cheeky: Military/Technical Jargon Style Operation Brown Drop Tactical Rear Ejection (T.R.E.) Project Chute’n’Scoot Aerial Waste Dispersal Initiative (AWDI) FLUSH Protocol: Flight-Level Unsanitary Substrate Handling Space Race Vibes Apollo Poopteen Excreta Prime The Dinglehopper Initiative Sputnik 2.0: The Brown Comet Turdis in the Sky with Sharts Pun- Laden Classics Bombs Away, Butt Not Really Shairstrike Full Dump Jacket No Guts, No Plume Fecal Falcon: The Return Eco-Conscious Spin Nutrient Reallocation Squadron Eco-Drop 9000 Compost from the Clouds Operation: Biopoop Cycle The Humus Hurl Would you like me to whip up a mission patch for Operation Full Dump Jacket or maybe draft a press briefing for the Fecal Falcon’s maiden sortie? We can even simulate a malfunction scenario — “Code Brown in Sector 12!” Where to next, Flight Commander?   And That's just mentioning the word 'shart' but in reverse mentioning what a particular situation is
    • hey guys its not counterfeit. i did test its ok needs formatting but how do i do that i need to go in dos and disk Disk Management anyone know step by step please 
    • The first link on the github page gives me a very, very red page warning me about phishing........
  • Recent Achievements

    • First Post
      Fuzz_c earned a badge
      First Post
    • First Post
      TIGOSS earned a badge
      First Post
    • Week One Done
      slackerzz earned a badge
      Week One Done
    • Week One Done
      vivetool earned a badge
      Week One Done
    • Reacting Well
      pnajbar earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      713
    2. 2
      ATLien_0
      279
    3. 3
      Michael Scrip
      209
    4. 4
      +FloatingFatMan
      201
    5. 5
      Steven P.
      132
  • Tell a friend

    Love Neowin? Tell a friend!