Terminator Salvation : The Future Begins


Recommended Posts

The psychiatrist has been the only actor in all three movies to date besides Arnold, wonder if he'll have a cameo again somewhere...

That's true, I didn't realise that.

Scirwode

There's nothing stopping them using either of their appearances (this film is set before even the T-800 series exists, aka Arnie) as the terminators have TWO declarations - series and model. Arnie is a T-800 series, model 101. The T-800 refers to it's design, it's strength, it's frame, it's processor, etc. whereas the 101 refers to what it looks like (hence model). So there could be a T-600 series, model 101 that's a T-600 that looks just like Arnie. A T-600, Model 102 would look completely different.

That's why Arnie looks the same in terminator 3, but has those weird fuel cells, it's a change in the design, but the model used is the same.

Or so the legend goes.

Well said, didn't think of that, that would also make up for Arnie being, lets say, less active lately :)

It would be wicked if Linda Hamilton were in the flashbacks, but she was really young then so it will have to be a murky flashback.

To be honest, i don't think 99.9% of films out there could ever compare to T2, it's genuinely one of THE best films ever made.

Totally true. It works so well as a big dumb action film that it's easy to neglect what a well made piece of cinema it actually is!

  • 5 weeks later...

Christian Bale Meets Arnold Schwarzenegger

Terminator Salvation star Christian Bale (The Dark Knight) met up with Governor Arnold Schwarzenegger at the Brentwood Country Mart causing further speculation that the former "Terminator" series star may play some part in the McG-directed summmer 2009 film. Perhaps a cameo appearance or voice-over? You can watch two videos of the meeting below the pic.

6b8b1bad.jpg

Link to source and videos

http://www.comingsoon.net/news/movienews.php?id=48734

Christian Bale Meets Arnold Schwarzenegger

Terminator Salvation star Christian Bale (The Dark Knight) met up with Governor Arnold Schwarzenegger at the Brentwood Country Mart causing further speculation that the former "Terminator" series star may play some part in the McG-directed summmer 2009 film. Perhaps a cameo appearance or voice-over? You can watch two videos of the meeting below the pic.

6b8b1bad.jpg

Link to source and videos

http://www.comingsoon.net/news/movienews.php?id=48734

Nice ass...but yeah he is passing down the torch!

^ Not exactly. Arnold is providing his voice for the movie. Even some rumors have pointed to digitally putting his face on the actor whose playing the T-800. They mentioned something about another James Cameron movie where he does that. A little insulting to the actor (although he does already look like Arnie) if that is their intention I hope its done right and doesn't look dumb.

  • 1 month later...
New featurette with some new footage: ** Careful, some spoilers **

http://www.slashfilm.com/2008/11/07/termin...f-martin-laing/

:o

This could be an awesome movie.

That is made of awesome!, I like the new Terminators!

James Cameron clarifying some things:

"There's been some discussion at AICN and elsewhere of me rescinding my so-called blessing of T4 and that's not the case. The truth is there never was a blessing to rescind, and there's been some kind of misunderstanding between me and McG, perfectly innocent I believe. He asked me in a phone call when I was shooting in New Zealand earlier this year if I would be a supporter and creative participant in the new film. I said sure, send me the script and I'll give you my thoughts. And I warned him that free advice is usually worth what you pay for it. For whatever reason I never got the script and to date I haven't seen a foot of film other than what everybody's seen in the trailer, which is not enough to form an opinion. So I have zero basis for supporting or dissing the film. As I said in an interview, for all I know it could be a masterpiece or it could be a big steaming pile. I think all people heard was the steaming pile part and concluded I was against the film, which I'm not. In fact, it might be very good, an opinion based solely on what Sam Worthington has shared with me. He's nobody's fool when it comes to material, and has absolutely the lowest bull**** quotient of anyone I know, and he has repeatedly told me that he reckons the film is going to be good. I know him to be very critical (in a healthy way) of his own work, and an actor who always aspires to excellence, so I know he wouldn't praise the film if he didn't feel it.

Obviously I can't give my blessing (whatever that means anyway ) to the film completely blind. But I'm predisposed to be supportive based on Sam's involvement and his judgment, because I believe in him. So there you have it. Let's all keep our fingers crossed that it's not a steaming pile.

Jim out"

http://www.aintitcool.com/node/39018

James Cameron clarifying some things:

"There's been some discussion at AICN and elsewhere of me rescinding my so-called blessing of T4 and that's not the case. The truth is there never was a blessing to rescind, and there's been some kind of misunderstanding between me and McG, perfectly innocent I believe. He asked me in a phone call when I was shooting in New Zealand earlier this year if I would be a supporter and creative participant in the new film. I said sure, send me the script and I'll give you my thoughts. And I warned him that free advice is usually worth what you pay for it. For whatever reason I never got the script and to date I haven't seen a foot of film other than what everybody's seen in the trailer, which is not enough to form an opinion. So I have zero basis for supporting or dissing the film. As I said in an interview, for all I know it could be a masterpiece or it could be a big steaming pile. I think all people heard was the steaming pile part and concluded I was against the film, which I'm not. In fact, it might be very good, an opinion based solely on what Sam Worthington has shared with me. He's nobody's fool when it comes to material, and has absolutely the lowest bull**** quotient of anyone I know, and he has repeatedly told me that he reckons the film is going to be good. I know him to be very critical (in a healthy way) of his own work, and an actor who always aspires to excellence, so I know he wouldn't praise the film if he didn't feel it.

Obviously I can't give my blessing (whatever that means anyway ) to the film completely blind. But I'm predisposed to be supportive based on Sam's involvement and his judgment, because I believe in him. So there you have it. Let's all keep our fingers crossed that it's not a steaming pile.

Jim out"

http://www.aintitcool.com/node/39018

Interesting, its nice in a way we know his thoughts on it.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft fixes one of Excel Copilot's most frustrating limitations by Usama Jawad Microsoft began integrating Copilot into Excel a couple of years ago and has been upgrading it with new functionalities since then. While some changes have been controversial, Microsoft is hoping to win over users by allowing them to be more productive via Copilot. To that end, it has now announced a Copilot improvement that may actually be appreciated by people who use it regularly. Excel customers often use the Copilot prompt box to issue instructions to format and customize their data, but it can become quite tiring to keep repeating the same instructions again and again. Microsoft now allows you to define Copilot personalization rules for formatting, naming conventions, formulas, and report styles. These can be accessed via Settings > Personalization, where you can explain your rules in natural language like "Always format currency in USD with no decimals", and just let Copilot take care of the rest. Microsoft is going a step further in this direction by allowing you to set workbook rules too. These rules are stored as a .Rules sheet, and are preserved while the workbook is shared. This fosters collaboration while making sure that standard rules govern the Copilot editing experience across the organization. Other advantages of this capability include pointing it to specific examples, defining dynamic formulas, and referencing an entire sheet and asking Copilot to infer rules based on that. You can leverage this feature by opening Copilot in Excel, clicking on "+", and selecting Create workbook rules. If you have an existing .Rules sheet, you can simply start listing the rules in column A as well. Personalization features are available to all Copilot in Excel users across the web, Mac, and Windows. Meanwhile, workbook rules are currently being previewed for Windows and Mac customers on the Insiders channel. General availability is scheduled after a few weeks, but a concrete date is currently unknown. Overall, the Excel capability is quite similar to ChatGPT's memory features, which allow you to permanently store items in the AI model's context window.
    • Imagine you still haven't discovered Total Commander that is doing all those things for three decades already...
    • This sounds like underneath the nice marketing spin, either someone at Adobe got tired of their lazy devs and asked Microsoft to help them sort at least some of Adobe's ancestral spaghetti code to make it go faster, or Microsoft wanted Adobe's crap to run better on Windows to make it look better when compared to Apple, so they offered to intervene. Either way, GOOD.
    • My favorite file manager for Windows 11 finally gets a long-requested feature by Taras Buria Files is among the best File Explorer alternatives for Windows 10 and 11. This free app is packed with all sorts of features and conveniences, but there is one crucial feature that is still missing—Tree View. Fortunately, the latest update in the Preview channel finally delivers it. With version 4.1.4, which is now available for download in the Preview channel, developers implemented Tree View, a new mode that displays folders in an expandable hierarchy. Windows 11's stock File Explorer always had this feature, but it was nowhere to be found in Files until now. Starting with the latest preview update, you can expand each drive and its nested folders without leaving the current location and then open the folder you need in the main view. To try Tree View in Files, update the app to the latest preview version, then click the small arrow next to a drive to expand its content. The developers say they are rolling out Tree View in Preview first to gather feedback from users and improve the feature before bringing it to all in the stable channel. In addition to Tree View, Files 4.1.14 improves the Windows Fonts folder. You can now preview each font directly in Files with no need to open the built-in font viewer. For now, these two features are only available in the Preview channel. For those using the stable release, developers recently released version 4.1.3, with improvements for the built-in tag system, on-demand folder size calculation, and plenty of various fixes. You can check out the full release notes here. You can download Files from the Microsoft Store (paid version) or its official website (free).
    • Who is paying for this 30x scale-up? Its sounds expensive.
  • Recent Achievements

    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      519
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      81
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!