Problem installing UAA Driver from Microsoft


Recommended Posts

I recently aquired a nc6400 through my work and I installed a OEM Version of Windows XP PRO. It took a while but I downloaded all the updated drivers and slipstreamed the controller drivers onto my Windows XP cd.

I have found all the drivers (even got the Bluetooth to work) but I can't get the sound to work.

I know for this model you need to install the Microsoft UAA HD driver. I tried the version listed for my laptop and a few other versions and I have not gotten anywhere.

When the setup runs a screen with the following message shows up.

"Microsoft UAA Bus Driver for HD Audio Setup is preparingthe installshield , which will guide you through the rest of the setup process."

After it dissapears I get nothing. If I try and install the actual sound driver I get the following error message.

"The HDA Audio bus driver is required and not found"

Any ideas? HP is clueless and wants me to reinstall my OS.

I'm assuming your HP laptop has Realtek audio? If so, my VAIO requires the Microsoft UAA HD driver before the soundcard can be installed.

Hope onto MSN, I'll send it over.

Radish?

I'm assuming your HP laptop has Realtek audio? If so, my VAIO requires the Microsoft UAA HD driver before the soundcard can be installed.

Hope onto MSN, I'll send it over.

Radish?

I am on MSN now.

I have tried to install many versions and so far none of them work.

Can you extract the drivers from the installer manually?

Sometimes Winrar can open either related cab files, or extract them from the installer's exe.

Not sure how reliable this would be with the UAA stuff though.

I installed WinRAR and I am not able to open up the cab files.

  • 3 weeks later...
Frank,

Could you tell me what you did withing Device Manager to get it working? I have a Compaq NX 7400 and am faced with the exact same scenario you had prior to Radish lending a helping hand.

Any help appreciated,

Cheers.

Your drivers aren't here? http://h20000.www2.hp.com/bizsupport/TechS...OID=1093#113165

If the install for this vanishes, you need to DELETE the registry entry @ HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP\SP3\KB888111WXPSP2

Once that is deleted then you can reinstall without it just flashing on the screen. It MIGHT not contain the wxpsp2 part at the end, but it is KB888111

Hope this helps... I have been battling this for awhile!

Okay, I as well have gotten immense problems with the stupid UAA etc. I've been working to get my audio to work for 12 hours now and I'm getting to the point of throwing the computer out the window. Okay.

First, thanks to Radish for welcoming me and being nice. ^^

My motherboard: Gigabyte GA-P35-DS3 Rev 2.0

I have tried to install the drivers from the disc which came with the motherboard, but with no luck. I have downloaded the latest drivers from Gigabyte's website, no luck. I have tried downloaded the latest driverpack, with both UAA and soundcard drivers from RealTek's site, no luck.

I am currently downloading another driver package from RealTek which was linked in some other forums, and will try that tomorrow when I wake up.

Any help would be GREATLY appreciated, I'm getting really frustrated. I will go to bed know, return in the morning. Thanks once again.

Right, remove all the audio drivers you have installed (including the UAA hotfix). Restart your computer.

Next, get the drivers from this link under the Audio section - http://www.gigabyte.com.tw/Support/Motherb...?ProductID=2627

Select - "Realtek Function driver for Realtek Azalia audio chip (Including Microsoft UAA Driver in English edition)"

Download it to your desktop > extract it to a folder using WinRAR or Universal Extractor > run the Setup.exe from the main folder > halfway through the setup it should extract the UAA driver and install it and notify you by the clock that an "Audio Device on High Definition Audio Bus" has been found > at this point it may ask for the WDM drivers (point it to the WDM folder from the audio drivers you extracted) or it may automatically install them for you > restart the computer when asked.

Also in your BIOS, check to see if you have an option for what type of audio you have enabled - it could be AC97 or HD Audio (it needs to be HD Audio).

If all goes well, you should have sound (Y)

Radish?

The only BIOS setting I can find that involves audio is "Azalia Codec:" [auto] or [disabled]. I'm guessing it should be on auto.

Update: I have now tried doing exactly as you said, but with no luck. The RealTek audio driver gets installed, but the UAA just wont show up anywhere, it's not in Add/Remove Programs, and it's not in Device manager.

I've tried multiple different UAA installers, both bundled with audio drivers and separate. The last UAA driver was the one I downloaded from the motherboard FAQ-site (http://www.gigabyte.com.tw/Support/Motherboard/FAQ_Model.aspx?FAQID=2501). Then it actually show up in Add/Remove Programs, but it isn't to be found elsewhere, and it certainly doesn't give me any sound...

Update 2: Uninstalling everything, as well as deleting the registry key mentioned above. And installing the Azalia-package from Gigabyte's website doesn't do anything. Windows fail to find the UAA Bus. I'm starting to think that this is hardware related... great...

Edited by peipei

I had the exact same problem and after two days of trying to install the correct drivers I finally got the sound card working on a HP DV6500 pavilion. This is how I solved the problem.

1. Download and install the Microsoft UAA High Defnition driver from the HP website.

2. Restart

3. Since I didn?t receive the notification "Audio Device on High Definition Audio Bus" I had to go to the device manager and under System devices I had to right click the PCI device with the yellow ! sign and select update driver. From there I selected automatic detection and waited till it was found. This time the yellow ! sign was replaced by Microsoft UAA bus Driver for High Defintion Audio.

4. Next download and install the Realtek High Definition Audio Codec

5. Restart

6. Finally download and install the Conexant High Definition Audio Driver available from the HP website. However I had some problems since the media couldn?t be found but I restarted and the sound worke:):)

7. so restart once more and hopefully you will have sound.

I guess this may be different from what type of laptop or system you are using. I never thought this would be so much problem when I decided to downgrade to XP because Vista is too unstable.

  • 2 months later...

I have the same motherboard as peipei and I tried everything you wrote in here but I have one (small?) problem - I cant uninstall UAA from 'system devices' because it says 'device is needed to boot' (translated from polish) I tried to uninstall it in the safe mode after disabling the device in normal xp and it didnt work too. any ideas?

edit: my motherboard is GIGABYTE GA-P35-DS3L/S3L (rewritten from manual)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • If you don't care to read what I said, then you prove my point. Maybe written media is beyond your attention span. Titles are not summaries my friend.
    • Nobody asked... in fact, I said "I don't care about political leanings"  
    • TLDR. Here is a far better title (just a basic example): Windows 11 26H2 to allow disabling Web search results
    • Restore will get my vote, only if to see if things are any different, doubt it though but Labour and Conservatives too out of touch and same thing over and over and over…, Lib Dem who?
    • There is nothing wrong with this title. You have completely missed the plot when it comes to "clickbait." The issue was never that a title tries to entice you to click, that is how titles have worked for over 100 years. The issue is when the title subverts expectations, getting you to click expecting something that isn't there. The classic clickbait example is "Boyfriend caught cheating, what happens next will shock you," then what happened next is the girlfriend was upset...which is probably the least shocking outcome imaginable. If sounds like what you want is for the titles to be a collection of 10-word summaries that you can skim, get the just of the story, and only click if you want more details. That is not, never has been, and never will be what titles are. You can go all the way back to print newspapers during the great depression and see the same thing. The newspaper was locked in a vending machine, all you can see is the headline, you choose to put in 5¢ to buy the paper and read the rest if you want. Those headlines were written in a way to sell the paper, not just to provide a summery. Here are two actual headlines from that time, "Wall Street Lays an Egg," or "Stocks Hit Bottom?" Maybe you'd say something like "it was wrong then and it's still wrong now." Okay, fine opinion to have, but it isn't like Neowin is doing something unjurnalistic, they are just following the age-old standards for written media.
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      525
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      67
  • Tell a friend

    Love Neowin? Tell a friend!