UACLauncher - launch adminprogs at startup without messages from UAC


Recommended Posts

Well, this program(combo) enables you to keep UAC on (not quit mode, COMPLETELY ON), and still be able to launch program that requires administrator access on startup without UACs prompts :D

It uses a program from ASUS SmartDoctor (ASDR.exe) that launches the program that I made with administrator access (without any UAC prompts)

Then, my program launches the program the user specified in the "Start.txt" :)

I dont know how ASDR works, it just does, would be fun to know....

I modified it a little using a HEX editor to read a different registry value than its original one, new one being:

HKLM\Software\UACLauncher\Path

How the other stuff works:

1. Start my prog

2. Two programs are extracted in the same folder, ASDR.exe and instsrv.exe (from microsoft, installs ASDR as a service, name UACLauncher)

3.1 Choose to install: ASDR is installed as a service

3.2 Choose to uninstall: ASDR service is uninstalled

4. See Start.txt for info

Click to download

But it's a very vulnerable attack vector for privilege escalation, which is why Vista comes with nothing to allow this.
Scheduled tasks allows the administrator to set up jobs to start, at logon, with administrative credentials - but this is really quite similar, in that services are doing the launching, and also requires administrative creds to set up.

I've used this on my machine to get SpeedFan and BOINC, two programs that require administrative privileges to run properly (no "the programs are defective, get new ones" nonsense, ok?) at logon.

Scheduled tasks allows the administrator to set up jobs to start, at logon, with administrative credentials - but this is really quite similar, in that services are doing the launching, and also requires administrative creds to set up.

I've used this on my machine to get SpeedFan and BOINC, two programs that require administrative privileges to run properly (no "the programs are defective, get new ones" nonsense, ok?) at logon.

Scheduling those tasks requires the Admin password to be entered. If at any point, something executing has your password, security is already shot to hell.

This will never be a target for exploitation, because it's just a little tool that probably won't be widely enough used to gain attention.

I was just explaining why Vista didn't come with anything to do this out of the box: Because it would be a very widely exploited feature.

Edited by MioTheGreat
Well, this program(combo) enables you to keep UAC on (not quit mode, COMPLETELY ON), and still be able to launch program that requires administrator access on startup without UACs prompts :D

Sweet! I just installed this so I can get Speedfan to start up by itself when I need to reboot. Very nice!!! Yes, yes, I realize that this creates a small security bypass vector. But the risk is damn small.

Thanks again!

Gary

P.S. When you said "ASDR is installed as a service" I looked for ASDR in the list of services but could not find it. I did find UACLauncher though! You might want to edit your first message to reflect that.

Edited by scuderiaconchiglia
  • 4 months later...
So all a hacker has to do is add their program name to start.txt... ?

Well, it's not quite that simple since you can easily store start.txt in a location that requires admin privileges to access.

It's more worrisome that if you put an executable on that list that isn't in a protected location, somebody could replace that executable (or a library that it loads) with a malicious binary.

I find it amusing that yo uactually think UAC is protecting your computer.

UAC is by far one of the worst security ideas Microsoft has implemented, imo.

The only UAC doesn't do well is protecting the user from his/her own stupidity. Otherwise, its pretty okay. If you think its invasive, you should see how Linux does it (hint: in the same way).

Scheduled tasks allows the administrator to set up jobs to start, at logon, with administrative credentials - but this is really quite similar, in that services are doing the launching, and also requires administrative creds to set up.

I've used this on my machine to get SpeedFan and BOINC, two programs that require administrative privileges to run properly (no "the programs are defective, get new ones" nonsense, ok?) at logon.

Scheduled Tasks is one way I got RivaTuner to boot without a UAC prompt. View instructions here. In the current version of RivaTuner it normally spawns a process that?prompts?the?user?for?elevation.?

It's quite unfortunate the ones who make the best hardware monitoring and control tools do it for free and have little to shell out to have their drivers signed.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft fixes one of Excel Copilot's most frustrating limitations by Usama Jawad Microsoft began integrating Copilot into Excel a couple of years ago and has been upgrading it with new functionalities since then. While some changes have been controversial, Microsoft is hoping to win over users by allowing them to be more productive via Copilot. To that end, it has now announced a Copilot improvement that may actually be appreciated by people who use it regularly. Excel customers often use the Copilot prompt box to issue instructions to format and customize their data, but it can become quite tiring to keep repeating the same instructions again and again. Microsoft now allows you to define Copilot personalization rules for formatting, naming conventions, formulas, and report styles. These can be accessed via Settings > Personalization, where you can explain your rules in natural language like "Always format currency in USD with no decimals", and just let Copilot take care of the rest. Microsoft is going a step further in this direction by allowing you to set workbook rules too. These rules are stored as a .Rules sheet, and are preserved while the workbook is shared. This fosters collaboration while making sure that standard rules govern the Copilot editing experience across the organization. Other advantages of this capability include pointing it to specific examples, defining dynamic formulas, and referencing an entire sheet and asking Copilot to infer rules based on that. You can leverage this feature by opening Copilot in Excel, clicking on "+", and selecting Create workbook rules. If you have an existing .Rules sheet, you can simply start listing the rules in column A as well. Personalization features are available to all Copilot in Excel users across the web, Mac, and Windows. Meanwhile, workbook rules are currently being previewed for Windows and Mac customers on the Insiders channel. General availability is scheduled after a few weeks, but a concrete date is currently unknown. Overall, the Excel capability is quite similar to ChatGPT's memory features, which allow you to permanently store items in the AI model's context window.
    • Imagine you still haven't discovered Total Commander that is doing all those things for three decades already...
    • This sounds like underneath the nice marketing spin, either someone at Adobe got tired of their lazy devs and asked Microsoft to help them sort at least some of Adobe's ancestral spaghetti code to make it go faster, or Microsoft wanted Adobe's crap to run better on Windows to make it look better when compared to Apple, so they offered to intervene. Either way, GOOD.
    • My favorite file manager for Windows 11 finally gets a long-requested feature by Taras Buria Files is among the best File Explorer alternatives for Windows 10 and 11. This free app is packed with all sorts of features and conveniences, but there is one crucial feature that is still missing—Tree View. Fortunately, the latest update in the Preview channel finally delivers it. With version 4.1.4, which is now available for download in the Preview channel, developers implemented Tree View, a new mode that displays folders in an expandable hierarchy. Windows 11's stock File Explorer always had this feature, but it was nowhere to be found in Files until now. Starting with the latest preview update, you can expand each drive and its nested folders without leaving the current location and then open the folder you need in the main view. To try Tree View in Files, update the app to the latest preview version, then click the small arrow next to a drive to expand its content. The developers say they are rolling out Tree View in Preview first to gather feedback from users and improve the feature before bringing it to all in the stable channel. In addition to Tree View, Files 4.1.14 improves the Windows Fonts folder. You can now preview each font directly in Files with no need to open the built-in font viewer. For now, these two features are only available in the Preview channel. For those using the stable release, developers recently released version 4.1.3, with improvements for the built-in tag system, on-demand folder size calculation, and plenty of various fixes. You can check out the full release notes here. You can download Files from the Microsoft Store (paid version) or its official website (free).
    • Who is paying for this 30x scale-up? Its sounds expensive.
  • Recent Achievements

    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      519
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      81
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!