How To Protect Your Computer In A Storm


Recommended Posts

How To Protect Your Computer In A Storm

http://www.videojug.com/film/how-to-protec...uter-in-a-storm

1 shut off (shut down windows)

2 hit the power switch on the pc and surge protector/power bar before you unplug

3. unplug everything (ethernet rj45 or phone line)even if you have a surge protector

4.wait untill the storms over plug it back in hit the switch and enjoy

the only "safe" way to stay on during a thunderstorm is to use a laptop or ups battery backup and wireless its cheaper to replace a wireless accesse point than a computer

it also dose not need to be a thunderstorm a wind storm or ice storm can cause damage

you may say well it can't hurt my computer but even a small spark from static in your body that you may not even feel is enough to damage your computer google ESD Electrostatic discharge

Edited by MvT Cracker
:rolleyes:

that protects the computer, but not you.... ;)

thats ok I enjoy the rain and loud thunder and lightning

and read the title.....you can make a guide on how to protect yourself during a thunderstomr if you want lol

I leave them on and hope the surge protection might actually do its job, didn't work for one of my lappys though

tigerdirect has cyber power surge protectors that have some sort of "connected equipment warranty"

"Featuring a $200,000 Connected Equipment Warranty!"

http://www.tigerdirect.ca/applications/Sea...5&CatId=232

I've always followed Mark Minasi's advice of tying 4-5 knots in the main power cord (the one that connects your spike guard to the mains). The idea is that incase of a lightning strike, the only damage that will be done will be to the wire. I've been doing this since the last 10-15 years and have never faced a problem. :)

I've always just left mine on with everything plugged in and on through heavy rain, wind and lightning storms. I do have a "bargain bin" surge protector but nothing fancy. Thankfully all that happens sometimes is the power gets knocked out and I don't have ups :'(

I've always followed Mark Minasi's advice of tying 4-5 knots in the main power cord (the one that connects your spike guard to the mains). The idea is that incase of a lightning strike, the only damage that will be done will be to the wire. I've been doing this since the last 10-15 years and have never faced a problem. :)

Do you have a link to Mark's article on this? I'd love to read it!

Suppose you left it plugged in and something surged, surely, worst case scenario, all it would do is pop the power supply? The rest of the components should remain in tact? Assuming that the PSU doesn't set alight or something :p

no fried motherboard fried modems ethernets other srange intermittent problems damage to hard drives ect

modemtop.jpg

Modem.JPG

I don't really worry with the computer I'm on now really. If I think about it and I'm not using it, I'll unplug it.

Our older family computer has had 2 or 3 hard drives fried because of storms :| It's really sensitive to storms for some reason. :s

A few years ago lightning struck and the power flickered in the house, restarting the 2 computers in the house. Mine was fine, but my sensitive family one's HD fried after it. Odd.

Yeah Mvt Cracker's pictures are like worse case scenario. Its just like how they say not to use phones (not including wireless handset ones) in storms. As you can see from the posts a storm wont automatically equate to bad news for your comp but can be terrible.

If you have to ride out a storm Belkin offer two surge protectors that offer "Unlimited$$ Connected Equipment Warranty" here I have one of there cheaper models with $250k warranty for my home theater setup and love it. Among others things like a lifetime warranty they allow you to protect your coaxial cables (cable tv, or cable modem), DSL line. Combine that with a hefty ups and away you go :D

My comp is pretty crap compared to todays standards, hence the bargain bin surge protector used on it lol

I bought a REAL UPS it was $200. last spring we had a big storm (normal in Texas) and the electricity went out -

For 10 minutes, I still had the computer on - w/ an annoying beep every 5 seconds coming from the UPS - I powered everything down and unplugged from the wall - now my battery inside is dead - and that was the only time the battery was ever used...

guess it was a waste of $200

;(

I just wish the geek squad logo would come off.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • BS, I've yet to run into a typical pc user that uses it at all, let alone half the population.
    • Codec Tweak Tool 6.7.7 by Razvan Serea This tool is a Swiss army knife for managing codecs and codec settings. Codec Tweak Tool will scan for broken filters and remove them. If the tool detects something that is broken, it will then prompt you with the details and you will be given the option to remove the broken item. Generate a detailed log of all installed codecs and filters, enable/disable more than 250 popular codecs and filters (if they are installed), manage preferred source filters, and reset settings. With this tool you can do things like: Scan the registry to detect and remove broken references to codecs and filters. Enable/disable more than 200 popular codecs and filters (if they are installed). Manage preferred source filters (a.k.a. splitters). Detect broken codecs and DirectShow filters. Fix problems with the standard DirectShow filters of Windows. A fix for a specific sound problem. Generate a text file with detailed information about all installed codecs and DirectShow filters, along with other relevant system information. Reset settings to recommended values for many popular codecs and DirectShow filters. Configure audio output settings for several popular audio decoders. Several configuration options for a few DirectShow filters that don't have an easily accessible interface for those options. Easy access to the configuration interfaces of various codecs and DirectShow filters Backup the settings of several codecs and DirectShow filters. Replace your current settings with those from a previous backup. Manage DirectShow filters - Enable or disable DirectShow filters. Manage ACM/VFW codecs - Enable or disable ACM/VFW codecs. Enable or disable DirectX Media Objects. Configure your preferred DirectShow source filters (a.k.a. splitters) for several common file extensions. Enable or disable the generation of thumbnails for several common video file formats in Windows Explorer. Download: Codec Tweak Tool 6.7.7 | 1.5 MB (Freeware) View: Codec Tweak Tool Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • The site is pretty sparse on features / tech specs. Can I plug it into a PC/hone/Switch via USB-C and use it as an external display? If so, what's the virtual resolution of the screen, the refresh rate, PPI of the image etc? Is the text crisp enough to use for coding at say 12pt? Is it good enough for playing dark games, like say Path of Exile 2? How about fast games like car racing games? Just how do they expect anyone to order this thing without giving out all this info?
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      547
    2. 2
      +Edouard
      163
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      neufuse
      65
    5. 5
      Steven P.
      65
  • Tell a friend

    Love Neowin? Tell a friend!