Vista freezes on boot at crcdisk.sys


Recommended Posts

Yesterday my notebook froze and I did a forced shutdown. When I restarted it, windows froze at the startup progress bar. I attempted to start in Safemode, but it froze at crcdisk.sys.

I tried disabling my various hardware devices in the bios, and eventually came to the conclusion that the cause of the problem is my Intel 3945 wireless card. If I disable this card, windows boots properly. As soon as I enable it, windows fails to boot.

I'm thinking it is a driver issue, but I can't uninstall the driver because it doesn't appear in the Device Manger if the hardware is disabled and I can't get into windows if it is enabled. Any suggestions?

Thanks,

Adam

Link to comment
https://www.neowin.net/forum/topic/607761-vista-freezes-on-boot-at-crcdisksys/
Share on other sites

Yesterday my notebook froze and I did a forced shutdown. When I restarted it, windows froze at the startup progress bar. I attempted to start in Safemode, but it froze at crcdisk.sys.

I tried disabling my various hardware devices in the bios, and eventually came to the conclusion that the cause of the problem is my Intel 3945 wireless card. If I disable this card, windows boots properly. As soon as I enable it, windows fails to boot.

I'm thinking it is a driver issue, but I can't uninstall the driver because it doesn't appear in the Device Manger if the hardware is disabled and I can't get into windows if it is enabled. Any suggestions?

Thanks,

Adam

http://search.microsoft.com/results.aspx?m...p;q=crcdisk.sys

That happen to me, but it takes only some seconds, after that it keeps loading other files and then start.

How much did you wait?

I've waited up to an hour.

Ok, that sounds like some corruption in the File System, have you tried to choose Last Know Good Configuration?

P.S.: You can boot into Windows, run CheckDisk or in the Boot Menu choose Directory Services Restore, or something like that.

Ok, that sounds like some corruption in the File System, have you tried to choose Last Know Good Configuration?

P.S.: You can boot into Windows, run CheckDisk or in the Boot Menu choose Directory Services Restore, or something like that.

I've tried "last known good configuration" with no success. Also tried Chkdisk and SpinRite and neither found disk problems. I also tried a repair using the Windows CD, but that too found no problems.

I still believe it is a driver or hardware issue with the Intel Wireless card because disabling it resolves the problem. I just don't know how to uninstall the driver if the device is disabled.

I still believe it is a driver or hardware issue with the Intel Wireless card because disabling it resolves the problem. I just don't know how to uninstall the driver if the device is disabled.

To uninstall the driver go to Add/Remove, Start Menu Folder for the driver (if there's any) or go to device manager, now right lick on the device and select uninstall, that should be enough...

To uninstall the driver go to Add/Remove, Start Menu Folder for the driver (if there's any) or go to device manager, now right lick on the device and select uninstall, that should be enough...

Driver does not appear in Add/Remove programs.

The device also does not appear in Device manager because I have disabled it in the bios, but as I mentioned before, if I enable it in the bios, Windows won't start. And that's my catch 22 situation...

If you press F8 right after POST, there should be an option to enable boot logging. Do that, and when it hangs, reboot off a CD into another OS, UBCD for example, and find (I think) boot.txt. It should list what loaded when Windows was starting. The last entry should be the problem-causing file. If it looks like a driver file, navigate to the Windows/system32 folder and rename it (don't delete it!).

Oh, have you tried the startup repair option? If you haven't, boot from your Vista DVD (hopefully your laptop came with a plain OS DVD), and there should be an option to repair, under the "Install now" button. Click that, choose your installation folder, and the Startup Repair option will check for various problems.

Driver does not appear in Add/Remove programs.

The device also does not appear in Device manager because I have disabled it in the bios, but as I mentioned before, if I enable it in the bios, Windows won't start. And that's my catch 22 situation...

Sorry, i've only understand that you disabled it through the BIOS.

Well, you can manually delete the driver files, however you need to know what files are.

Go to: C:\WINDOWS\System32\Drivers

now look at files description (put explorer in details view and add the needed tabs), then move the files to a new folder, then go to C:\WINDOWS\Inf and search files by name, based on the name of the driver files (eg, iw.sys -- iw.inf etc)

This is something hard to explain trough messages, lol.

See if there's an update for your BIOS.

P.S.: You need that device?

Problem just started out of nowhere. I didn't install any OS updates, drives, or software.

I will try the boot logging suggestion. I did try startup repair, but it didn't find any problems.

Yes, I do need the device, because without it I can't use wireless.

I believe the problem is a hardware issue. I reformatted the hard drive, then tried to reinstall Windows. The install would not start if my wireless card was enabled. I disabled the card and was able to install Windows. But still when I enable the wireless card, windows fails to boot.

I guess I will purchase a new internal wireless card. Thanks for all your suggestions.

  • 3 weeks later...

Well I replaced the wireless card and it did not resolve the problem. The only thing I can think of now is a faulty motherboard.

But I don't want to spend a couple hundred dollars for a new board unless I'm sure it's the problem.

The system passes all the tests when I use the Dell Diagnostics CD.

Any other suggestions?

One other thing to note is that I tried to boot off an Ubuntu 7.10 LiveCD and it also froze during boot, so I'm sure it's a hardware and not OS issue.

  • 3 months later...

Im not sure if you're still having problems, but I encountered the issue today and during the boot I enabled loading non signed drivers in the F8 menu. Booted right up. This is on Vista Ultimate 64 bit edition, shouldn't matter but I did want to mention that. Hope it helps.

  • 1 year later...

I am having this same problem, my wife was right clicking icons in the task bar and shutting them off, and screen went funky, so she rebooted the system, and this happened. i dont know what to do, i cant get into windows at all, through safe mode,last known, anything, it just hangs on the progress bar, or the crc file if i try safe mode.

  • 1 month later...

I'm having this same issue on a Toshiba Satellite A305-S6872.. I've read a couple of suggestion but I need neowin's help.

It's just a brand new install of windows xp home basic 32-bit. Fully updated through automatic updates and it stopped working suddenly. THe person claims that she didn't install anything new, and from what i've read this seems to happen a lot.

things that i will try:

-re installing vista and disabling automatic updates automatically

-disabling hibernation

-update bios if needed

- install drivers from manufactures website (not automatic updates)

- just install security updates

http://social.technet.microsoft.com/forums...b-3e1811899ce6/

here they're talking about renaming or deleting some files but I don't completely understand the instructions... please help guys. :)

what do you guys think?

  • 1 month later...
Yesterday my notebook froze and I did a forced shutdown. When I restarted it, windows froze at the startup progress bar. I attempted to start in Safemode, but it froze at crcdisk.sys.

I tried disabling my various hardware devices in the bios, and eventually came to the conclusion that the cause of the problem is my Intel 3945 wireless card. If I disable this card, windows boots properly. As soon as I enable it, windows fails to boot.

I'm thinking it is a driver issue, but I can't uninstall the driver because it doesn't appear in the Device Manger if the hardware is disabled and I can't get into windows if it is enabled. Any suggestions?

Thanks,

Adam

~<Snip>~

Edited by Andrew-DB
Please do not condone piracy on this board.
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Malwarebytes Anti-Malware 5.6.1.257 by Razvan Serea Malwarebytes is a high performance anti-malware application that thoroughly removes even the most advanced malware and spyware. Malwarebytes version 5.**** brings comprehensive protection against today’s threat landscape so that you can finally replace your traditional antivirus. You can finally replace your traditional antivirus, thanks to a innovative and layered approach to prevent malware infections using a healthy combination of proactive and signature-less technologies. While signatures are still effective against threats like potentially unwanted programs, the majority of malware detection events already come from signature-less technologies like Malwarebytes Anti-Exploit and Malwarebytes Anti-Ransomware; that trend will only continue to grow. For many of you, this is something you already know, since over 50% of the users already run Malwarebytes as their sole security software, without any third-party antivirus. What's new in Malwarebytes 5.****: Unified user experience - For the first time, Malwarebytes now provides a consistent experience across all of our desktop and mobile products courtesy of an all new and reimagined user experience powered by a faster and more responsive UI all managed through an intuitive dashboard. Modern security and privacy integrations - Antivirus and ultra-fast VPN come together seamlessly in one easy-to-use solution. Whether you’re looking for a next-gen VPN to secure your online activity, or harnessing the power of Browser Guard to block ad trackers and scam sites, taking charge of your privacy is simple. Trusted Advisor - Empowers you with real-time insights, easy-to-read protection score and expert guidance that puts you in control over your security and privacy. Malwarebytes 5.6.1.257 changelog: Features and improvements Updated the sign-in section of the My Subscription page to clarify that users can activate their subscription by signing in with their Malwarebytes account. Updated the uninstall flow to collect more meaningful insights and address customer concerns. Refreshed the app's tutorial layout for a better look and feel. Issues fixed Fixed an outdated link when clicking Take action after running a Digital Footprint Scan. Miscellaneous bug fixes. Download: Malwarebytes 5.6.1.257 | 472.0 MB (Free, paid upgrade available) Links: Malwarebytes Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Yep, not sure where the surprise is here. They release a new model for every phone, every year
    • AI would probably be better utilised replacing Executives than Engineers.
    • RapidRAW 1.5.8 by Razvan Serea RapidRAW is a beautiful, non-destructive, GPU‑accelerated RAW image editor designed for speed and simplicity. It uses a lightweight (~30 MB), efficient code base built with Rust, React and Tauri. Ideal for Lightroom workflows, it offers rich editing tools—exposure, contrast, highlights, shadows, whites/blacks, tone curves, HSL mixer, dehaze, vignetting, film grain, sharpening, clarity and noise reduction—processed in real-time on the GPU. Features include intuitive masking (brush, linear, radial, AI-powered subject and foreground detection), generative edit layers (via ComfyUI), 32‑bit precision, and full RAW format support through rawler. RapidRAW also provides library management (folder navigation, ratings, metadata, EXIF viewer), batch operations, export presets (JPEG/PNG/TIFF), sidecar editing (.rrdata), undo/redo history, customizable UI themes, smooth animations, resizable panels, and preset copy/paste. A modern high-performance Lightroom alternative with polished UX and creative tools, RapidRAW brings powerful photo editing to photographers seeking speed, responsive GPU feedback, and streamlined workflows. RapidRAW v1.5.8 release notes: This release introduces several new editing tools and workflow refinements designed to improve both photo editing and library management. It expands creative flexibility with the addition of a preset intensity slider and a global hue adjustment, while also introducing convenient navigation features such as quick bottom bar filters and folder sorting. Behind the scenes, the update addresses background indexing issues and ensures folder image counts are updated correctly. It also broadens accessibility by adding support for Korean and Traditional Chinese. [full changelog] Download: RapidRAW 1.5.8 | ARM64 | ~20.0 MB (Open Source) View: RapidRAW Home Page | Screenshot | Other operating systems Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • AnyDesk 9.7.8 by Razvan Serea AnyDesk is a fast remote desktop system and enables users to access their data, images, videos and applications from anywhere and at any time, and also to share it with others. AnyDesk is the first remote desktop software that doesn't require you to think about what you can do. CAD, video editing or simply working comfortably with an office suite for hours are just a few examples. AnyDesk is designed for modern multi-core CPUs. Most of AnyDesk's image processing is done con­currently. This way, AnyDesk can utilize up to 90% of modern CPUs. AnyDesk works across multiple platforms and operating systems: Windows, Linux, Free BSD, Mac OS, iOS and Android. Just 7 megabytes - downloaded in a glimpse, sent via email, or fired up from your USB drive, AnyDesk will turn any desktop into your desktop in se­conds. No administrative privileges or installation needed. AnyDesk 9.7.8 fixes: Fixed a bug that could lead to a crash Download: AnyDesk 9.7.8 | 8.0 MB (Free for private use, paid upgrade available) Links: AnyDesk Home Page | Other platforms | Release History | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      xvvxcvv earned a badge
      Week One Done
    • One Month Later
      xvvxcvv earned a badge
      One Month Later
    • Enthusiast
      Xonos went up a rank
      Enthusiast
    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      405
    2. 2
      +Edouard
      169
    3. 3
      PsYcHoKiLLa
      129
    4. 4
      neufuse
      69
    5. 5
      Xenon
      68
  • Tell a friend

    Love Neowin? Tell a friend!