Vista freezes on boot at crcdisk.sys


Recommended Posts

Yesterday my notebook froze and I did a forced shutdown. When I restarted it, windows froze at the startup progress bar. I attempted to start in Safemode, but it froze at crcdisk.sys.

I tried disabling my various hardware devices in the bios, and eventually came to the conclusion that the cause of the problem is my Intel 3945 wireless card. If I disable this card, windows boots properly. As soon as I enable it, windows fails to boot.

I'm thinking it is a driver issue, but I can't uninstall the driver because it doesn't appear in the Device Manger if the hardware is disabled and I can't get into windows if it is enabled. Any suggestions?

Thanks,

Adam

Link to comment
https://www.neowin.net/forum/topic/607761-vista-freezes-on-boot-at-crcdisksys/
Share on other sites

Yesterday my notebook froze and I did a forced shutdown. When I restarted it, windows froze at the startup progress bar. I attempted to start in Safemode, but it froze at crcdisk.sys.

I tried disabling my various hardware devices in the bios, and eventually came to the conclusion that the cause of the problem is my Intel 3945 wireless card. If I disable this card, windows boots properly. As soon as I enable it, windows fails to boot.

I'm thinking it is a driver issue, but I can't uninstall the driver because it doesn't appear in the Device Manger if the hardware is disabled and I can't get into windows if it is enabled. Any suggestions?

Thanks,

Adam

http://search.microsoft.com/results.aspx?m...p;q=crcdisk.sys

That happen to me, but it takes only some seconds, after that it keeps loading other files and then start.

How much did you wait?

I've waited up to an hour.

Ok, that sounds like some corruption in the File System, have you tried to choose Last Know Good Configuration?

P.S.: You can boot into Windows, run CheckDisk or in the Boot Menu choose Directory Services Restore, or something like that.

Ok, that sounds like some corruption in the File System, have you tried to choose Last Know Good Configuration?

P.S.: You can boot into Windows, run CheckDisk or in the Boot Menu choose Directory Services Restore, or something like that.

I've tried "last known good configuration" with no success. Also tried Chkdisk and SpinRite and neither found disk problems. I also tried a repair using the Windows CD, but that too found no problems.

I still believe it is a driver or hardware issue with the Intel Wireless card because disabling it resolves the problem. I just don't know how to uninstall the driver if the device is disabled.

I still believe it is a driver or hardware issue with the Intel Wireless card because disabling it resolves the problem. I just don't know how to uninstall the driver if the device is disabled.

To uninstall the driver go to Add/Remove, Start Menu Folder for the driver (if there's any) or go to device manager, now right lick on the device and select uninstall, that should be enough...

To uninstall the driver go to Add/Remove, Start Menu Folder for the driver (if there's any) or go to device manager, now right lick on the device and select uninstall, that should be enough...

Driver does not appear in Add/Remove programs.

The device also does not appear in Device manager because I have disabled it in the bios, but as I mentioned before, if I enable it in the bios, Windows won't start. And that's my catch 22 situation...

If you press F8 right after POST, there should be an option to enable boot logging. Do that, and when it hangs, reboot off a CD into another OS, UBCD for example, and find (I think) boot.txt. It should list what loaded when Windows was starting. The last entry should be the problem-causing file. If it looks like a driver file, navigate to the Windows/system32 folder and rename it (don't delete it!).

Oh, have you tried the startup repair option? If you haven't, boot from your Vista DVD (hopefully your laptop came with a plain OS DVD), and there should be an option to repair, under the "Install now" button. Click that, choose your installation folder, and the Startup Repair option will check for various problems.

Driver does not appear in Add/Remove programs.

The device also does not appear in Device manager because I have disabled it in the bios, but as I mentioned before, if I enable it in the bios, Windows won't start. And that's my catch 22 situation...

Sorry, i've only understand that you disabled it through the BIOS.

Well, you can manually delete the driver files, however you need to know what files are.

Go to: C:\WINDOWS\System32\Drivers

now look at files description (put explorer in details view and add the needed tabs), then move the files to a new folder, then go to C:\WINDOWS\Inf and search files by name, based on the name of the driver files (eg, iw.sys -- iw.inf etc)

This is something hard to explain trough messages, lol.

See if there's an update for your BIOS.

P.S.: You need that device?

Problem just started out of nowhere. I didn't install any OS updates, drives, or software.

I will try the boot logging suggestion. I did try startup repair, but it didn't find any problems.

Yes, I do need the device, because without it I can't use wireless.

I believe the problem is a hardware issue. I reformatted the hard drive, then tried to reinstall Windows. The install would not start if my wireless card was enabled. I disabled the card and was able to install Windows. But still when I enable the wireless card, windows fails to boot.

I guess I will purchase a new internal wireless card. Thanks for all your suggestions.

  • 3 weeks later...

Well I replaced the wireless card and it did not resolve the problem. The only thing I can think of now is a faulty motherboard.

But I don't want to spend a couple hundred dollars for a new board unless I'm sure it's the problem.

The system passes all the tests when I use the Dell Diagnostics CD.

Any other suggestions?

One other thing to note is that I tried to boot off an Ubuntu 7.10 LiveCD and it also froze during boot, so I'm sure it's a hardware and not OS issue.

  • 3 months later...

Im not sure if you're still having problems, but I encountered the issue today and during the boot I enabled loading non signed drivers in the F8 menu. Booted right up. This is on Vista Ultimate 64 bit edition, shouldn't matter but I did want to mention that. Hope it helps.

  • 1 year later...

I am having this same problem, my wife was right clicking icons in the task bar and shutting them off, and screen went funky, so she rebooted the system, and this happened. i dont know what to do, i cant get into windows at all, through safe mode,last known, anything, it just hangs on the progress bar, or the crc file if i try safe mode.

  • 1 month later...

I'm having this same issue on a Toshiba Satellite A305-S6872.. I've read a couple of suggestion but I need neowin's help.

It's just a brand new install of windows xp home basic 32-bit. Fully updated through automatic updates and it stopped working suddenly. THe person claims that she didn't install anything new, and from what i've read this seems to happen a lot.

things that i will try:

-re installing vista and disabling automatic updates automatically

-disabling hibernation

-update bios if needed

- install drivers from manufactures website (not automatic updates)

- just install security updates

http://social.technet.microsoft.com/forums...b-3e1811899ce6/

here they're talking about renaming or deleting some files but I don't completely understand the instructions... please help guys. :)

what do you guys think?

  • 1 month later...
Yesterday my notebook froze and I did a forced shutdown. When I restarted it, windows froze at the startup progress bar. I attempted to start in Safemode, but it froze at crcdisk.sys.

I tried disabling my various hardware devices in the bios, and eventually came to the conclusion that the cause of the problem is my Intel 3945 wireless card. If I disable this card, windows boots properly. As soon as I enable it, windows fails to boot.

I'm thinking it is a driver issue, but I can't uninstall the driver because it doesn't appear in the Device Manger if the hardware is disabled and I can't get into windows if it is enabled. Any suggestions?

Thanks,

Adam

~<Snip>~

Edited by Andrew-DB
Please do not condone piracy on this board.
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.5 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.5 changelog: Fixes crashes related to audio devices on Windows (DirectSound and ASIO) Fixes several crashes and memory corruption issues Fixes opening several headerless files at once, which previously dropped all but one Improves batch export by suggesting and remembering the destination folder Fixes accented and non-Latin characters in VST plug-in and compressed-archive file names Adds zstd compression support and updates the archive library Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I did think about a Echo show once and it would be useful to see what my cameras see. But my brother got one and I changed my mind. Adverts and not really worth the price just to see my cameras. I have a load of dots and a Echo Gen 4, they will do.
    • I asking where you are from or live, because if you don't live in the U.K, why are you so bothered? That is another reason I voted out, E.U and people poking their noses in where they should not be. Sadly we still have it, Trump, and his cronies. Putin as well and no doubt others. It makes no difference what we believe, if we made the right choice or not, we are out. As I said to someone when the news first broke we have voted out, we just need to make the best of it. I have no problems with closer ties to the E.U, we still need to trade. Just don't want to be in their club.
    • So you think I voted out because i am anti-immigrant. I am fed up with those that come over and think that we owe them something. The ones that are at the moment coming over from France where they are already in a safe country because they think and no doubt will get everything chucked at them. While people who were born and bred here get very little. I have nothing against as i have said before those that come here and work. In fact I know full well that our NHS would struggle without them. I do have a problem with those that come over here and try to push their religion and their way of life onto us. My reasons for voting out was because of what the E.U is and is also becoming. I did not agree with Freedom of movement, not because I don't want people over here, but because people need to be checked before being allowed to cross borders and that goes both ways. But my main thing was because the E.U is becoming if not already a united states of Europe. The only reason countries like Poland and Romania joined was because they had no money. When my partner left Poland, she had nothing, Poland had nothing, that is why she left. Wanted to learn something and earn a living. The E.U would have us back according to Michel Barnier. https://www.euronews.com/my-eu...ator-barnier-tells-euronews Why are you so scared to say what country you are in?
    • I wonder what that line really meant...
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      500
    2. 2
      +Edouard
      205
    3. 3
      PsYcHoKiLLa
      145
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      68
  • Tell a friend

    Love Neowin? Tell a friend!