Vista freezes on boot at crcdisk.sys


Recommended Posts

Yesterday my notebook froze and I did a forced shutdown. When I restarted it, windows froze at the startup progress bar. I attempted to start in Safemode, but it froze at crcdisk.sys.

I tried disabling my various hardware devices in the bios, and eventually came to the conclusion that the cause of the problem is my Intel 3945 wireless card. If I disable this card, windows boots properly. As soon as I enable it, windows fails to boot.

I'm thinking it is a driver issue, but I can't uninstall the driver because it doesn't appear in the Device Manger if the hardware is disabled and I can't get into windows if it is enabled. Any suggestions?

Thanks,

Adam

Link to comment
https://www.neowin.net/forum/topic/607761-vista-freezes-on-boot-at-crcdisksys/
Share on other sites

Yesterday my notebook froze and I did a forced shutdown. When I restarted it, windows froze at the startup progress bar. I attempted to start in Safemode, but it froze at crcdisk.sys.

I tried disabling my various hardware devices in the bios, and eventually came to the conclusion that the cause of the problem is my Intel 3945 wireless card. If I disable this card, windows boots properly. As soon as I enable it, windows fails to boot.

I'm thinking it is a driver issue, but I can't uninstall the driver because it doesn't appear in the Device Manger if the hardware is disabled and I can't get into windows if it is enabled. Any suggestions?

Thanks,

Adam

http://search.microsoft.com/results.aspx?m...p;q=crcdisk.sys

That happen to me, but it takes only some seconds, after that it keeps loading other files and then start.

How much did you wait?

I've waited up to an hour.

Ok, that sounds like some corruption in the File System, have you tried to choose Last Know Good Configuration?

P.S.: You can boot into Windows, run CheckDisk or in the Boot Menu choose Directory Services Restore, or something like that.

Ok, that sounds like some corruption in the File System, have you tried to choose Last Know Good Configuration?

P.S.: You can boot into Windows, run CheckDisk or in the Boot Menu choose Directory Services Restore, or something like that.

I've tried "last known good configuration" with no success. Also tried Chkdisk and SpinRite and neither found disk problems. I also tried a repair using the Windows CD, but that too found no problems.

I still believe it is a driver or hardware issue with the Intel Wireless card because disabling it resolves the problem. I just don't know how to uninstall the driver if the device is disabled.

I still believe it is a driver or hardware issue with the Intel Wireless card because disabling it resolves the problem. I just don't know how to uninstall the driver if the device is disabled.

To uninstall the driver go to Add/Remove, Start Menu Folder for the driver (if there's any) or go to device manager, now right lick on the device and select uninstall, that should be enough...

To uninstall the driver go to Add/Remove, Start Menu Folder for the driver (if there's any) or go to device manager, now right lick on the device and select uninstall, that should be enough...

Driver does not appear in Add/Remove programs.

The device also does not appear in Device manager because I have disabled it in the bios, but as I mentioned before, if I enable it in the bios, Windows won't start. And that's my catch 22 situation...

If you press F8 right after POST, there should be an option to enable boot logging. Do that, and when it hangs, reboot off a CD into another OS, UBCD for example, and find (I think) boot.txt. It should list what loaded when Windows was starting. The last entry should be the problem-causing file. If it looks like a driver file, navigate to the Windows/system32 folder and rename it (don't delete it!).

Oh, have you tried the startup repair option? If you haven't, boot from your Vista DVD (hopefully your laptop came with a plain OS DVD), and there should be an option to repair, under the "Install now" button. Click that, choose your installation folder, and the Startup Repair option will check for various problems.

Driver does not appear in Add/Remove programs.

The device also does not appear in Device manager because I have disabled it in the bios, but as I mentioned before, if I enable it in the bios, Windows won't start. And that's my catch 22 situation...

Sorry, i've only understand that you disabled it through the BIOS.

Well, you can manually delete the driver files, however you need to know what files are.

Go to: C:\WINDOWS\System32\Drivers

now look at files description (put explorer in details view and add the needed tabs), then move the files to a new folder, then go to C:\WINDOWS\Inf and search files by name, based on the name of the driver files (eg, iw.sys -- iw.inf etc)

This is something hard to explain trough messages, lol.

See if there's an update for your BIOS.

P.S.: You need that device?

Problem just started out of nowhere. I didn't install any OS updates, drives, or software.

I will try the boot logging suggestion. I did try startup repair, but it didn't find any problems.

Yes, I do need the device, because without it I can't use wireless.

I believe the problem is a hardware issue. I reformatted the hard drive, then tried to reinstall Windows. The install would not start if my wireless card was enabled. I disabled the card and was able to install Windows. But still when I enable the wireless card, windows fails to boot.

I guess I will purchase a new internal wireless card. Thanks for all your suggestions.

  • 3 weeks later...

Well I replaced the wireless card and it did not resolve the problem. The only thing I can think of now is a faulty motherboard.

But I don't want to spend a couple hundred dollars for a new board unless I'm sure it's the problem.

The system passes all the tests when I use the Dell Diagnostics CD.

Any other suggestions?

One other thing to note is that I tried to boot off an Ubuntu 7.10 LiveCD and it also froze during boot, so I'm sure it's a hardware and not OS issue.

  • 3 months later...

Im not sure if you're still having problems, but I encountered the issue today and during the boot I enabled loading non signed drivers in the F8 menu. Booted right up. This is on Vista Ultimate 64 bit edition, shouldn't matter but I did want to mention that. Hope it helps.

  • 1 year later...

I am having this same problem, my wife was right clicking icons in the task bar and shutting them off, and screen went funky, so she rebooted the system, and this happened. i dont know what to do, i cant get into windows at all, through safe mode,last known, anything, it just hangs on the progress bar, or the crc file if i try safe mode.

  • 1 month later...

I'm having this same issue on a Toshiba Satellite A305-S6872.. I've read a couple of suggestion but I need neowin's help.

It's just a brand new install of windows xp home basic 32-bit. Fully updated through automatic updates and it stopped working suddenly. THe person claims that she didn't install anything new, and from what i've read this seems to happen a lot.

things that i will try:

-re installing vista and disabling automatic updates automatically

-disabling hibernation

-update bios if needed

- install drivers from manufactures website (not automatic updates)

- just install security updates

http://social.technet.microsoft.com/forums...b-3e1811899ce6/

here they're talking about renaming or deleting some files but I don't completely understand the instructions... please help guys. :)

what do you guys think?

  • 1 month later...
Yesterday my notebook froze and I did a forced shutdown. When I restarted it, windows froze at the startup progress bar. I attempted to start in Safemode, but it froze at crcdisk.sys.

I tried disabling my various hardware devices in the bios, and eventually came to the conclusion that the cause of the problem is my Intel 3945 wireless card. If I disable this card, windows boots properly. As soon as I enable it, windows fails to boot.

I'm thinking it is a driver issue, but I can't uninstall the driver because it doesn't appear in the Device Manger if the hardware is disabled and I can't get into windows if it is enabled. Any suggestions?

Thanks,

Adam

~<Snip>~

Edited by Andrew-DB
Please do not condone piracy on this board.
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Rufus alternative Ventoy now supports Windows 11's mandatory update, fixes major boot bug by Sayan Sen While Microsoft has its own official Media Creation Tool used for making bootable USB media, there are some popular third-party utilities as well which offer additional options like bypassing system requirements, Microsoft Account creation, and more. One of these is Ventoy, and the software has received its latest update today. In fact, the app actually got a slew of updates over the last couple of days, three version releases in total, to be specific. The first release, version 1.1.13, was pulled as there was some unspecified error in the update, and as such, the corrected version 1.1.14 was pushed out. Following that on very short notice, 1.1.15 was published as well. For those unfamiliar, Ventoy is an open-source utility that lets users create a bootable USB drive once and then simply copy ISO, WIM, IMG, VHD, or EFI files onto it without repeatedly formatting the drive. It supports both legacy BIOS and UEFI boot modes, Secure Boot, and a wide range of operating systems, making it one of the most versatile tools in the category. The biggest change in version 1.1.14 is an updated Secure Boot shim file aimed at resolving the UEFI CA 2023 issue, which is basically a compatibility problem that has affected Secure Boot environments on some systems. If you recall, we reported about severe boot issues on HP devices following the release of updated Secure Boot 2023 keys. For anyone who may not be aware, back in early 2024, Microsoft announced that it was updating Secure Boot keys as they were going to become 15 years old in 2026, which is also when they are set to expire. As such, the new 2023 certificates have been rolling out with the newest Windows 11 updates. Updated boot manager and Secure Boot certificates are crucial for protection against malware like bootkits. These are mandatory updates. Alongside that, the VentoyPlugson graphical plugin configurator was updated in sync with the release. The update also introduces a new VTOY_SECURE_BOOT_POLICY option within the Global Control plugin, giving users more flexibility in managing Secure Boot behavior. Ventoy has also received a fix for a startup issue when Secure Boot was disabled. Microsoft does officially allow users to boot systems without Secure Boot as long as the PC is Secure Boot capable. The full changelog is given below: Update secure boot shim file to solve the UEFI CA 2023 issue. The new release use a new CA, so you need to enroll the new key for the first boot time. VentoyPlugson update synchronously. Global control plugin add a VTOY_SECURE_BOOT_POLICY option. Fix the boot issue when Secure Boot is disabled in the UEFI firmware. You can download the latest version of the app here on Ventoy's official GitHub repo or from Neowin software stories.
    • Windows 11 is fine, no issues on any of the machines I've run it on since release. The stricter security requirements are a good thing, sometimes the baseline needs to change and people will winge, but it is what it is. Happened with the move from 9x to NT - broke compatability Happened with XP SP2 when security started to become a serious consideration Certainly happend with Vista that brought in UAC, the concept of not running as admin (something that has been the norm in Linux/Unix from pretty much the start) and a completely new driver stack. Windows 11 will probably get looked back at as the point where even consumer and SMB IT was dragged kicking and screaming into a somewhat secure by default configuration.
    • Bluestacks has been emulating Android on Windows for fifteen years. It's janky and riddled with ads though, so WSA looked like it was going to be a huge improvement over the emulator experience. Too bad Microsoft dropped the ball on that.
    • Classic. China would be nothing without Western, Japanese, and South Korean technology.
    • The world is larger then your small viewpoint. Plenty of scientists care about this, especially those involved in space.
  • Recent Achievements

    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      441
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      134
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!