• 0

Printing across a network using C#


Question

Hi all

I am currently writing a service that will run once per day, retrieve data from a SQL database, and print some reports.

Here is the problem:

I have an xml config file which contains a report code (eg RPT001) and the printer it is to print to. This means that in future if I want to, I can simply change the printer name without too much disruption and the reports will be redirected elsewhere.

However, I am unable to set the printer name so that the report gets printed out. When I use :

// If we have specified a printer name print to this one otherwise the

// default printer will be used

if (_printerName != "")

{

pd.PrinterSettings.PrinterName = String.Format("{0}", _printerName);

}

A call to pd.PrinterSettings.IsValid, always returns false.

I have been looking into the PrintingPermissions topic, however I am unable to find a proper clear sample of how to use it so that I can grant access to my code to be able to print across the network.

The printers are connected to a central print server, however specifying "\\servername\printer" doesnt seem to work either.

To complete the picture, the code which performs the printing is in its own DLL and the service references this DLL.

What changes need to be made and where to get this to work?

Any and all help is very much appreciated :D

Link to comment
https://www.neowin.net/forum/topic/613622-printing-across-a-network-using-c/
Share on other sites

16 answers to this question

Recommended Posts

  • 0

Hi,

Printing permissions work like so:

PrintingPermission perm = new PrintingPermission(System.Security.Permissions.PermissionState.Unrestricted);
perm.Level = PrintingPermissionLevel.AllPrinting;

Setting PrinterSettings.PrinterName should accept the sting network printer name, however, it might be easier to create a server side local printer that points to the network printer, and print to the local printer instead.

I haven't done much printing in .NET yet, but I will keep looking into it for you.

  • 0

Ahh thanks for the reply, but where do I put this code?

Does it go into my service, or into the printing DLL.

Ultimately the service I am writing will sit on a server somewhere and just poll every day, so I need it to be as hassle free as possible

  • 0

Thanks Antaris for your help.

I actually got it working without the code permissions part. Turned out the printer names had been renamed to all caps and that was throwing the code off.

So when I changed these in my config file it worked fine.

  • 0

Ok, I'm back again with a similar issue and this one has me stumped.

After running fine for months, I added a new printer name to the xml file, in the same format ... \\server\printername

However, when the code runs normally, I get an error back saying the printer name is invalid:

// If we have specified a printer name print to this one otherwise the 
// default printer will be used
if (_printerName != "")
{
pd.PrinterSettings.PrinterName = String.Format("{0}", _printerName);
}


if (pd.PrinterSettings.IsValid != false)
{
			//  Print stuff here
}

However, when I step through the code in debug mode, IsValid becomes true and the reports print fine.

I figured it had something to do with how long it was taking me to step to the next line of code (some sort of network delay possibly on name resolution), so I added a Sleep statement on the current thread to see if that would fix it - no such luck.

I know the printer name is valid, as I can print to it when I step through the code in debug mode, however this has to be deployed and just work so this cant be an option.

Any ideas would be appreciated.

Thanks

  • 0

Yeah the versions are the exact same, the only thing that was different is the name of the printer being passed in.

I've actually now got this working:

1) Tried the source code on a colleagues machine ---> worked flawlessly, not a problem (!)

2) Removed the network printer from my machine (again) and it now works no problem (!)

So thats that little bit sorted out.

Now if only I could make the pages print properly in landscape mode, I'd be done.

I've tried setting

e.PageSettings.Landscape = true

in the PrintPage event handler, but it doesnt work the way I want it to.

Back to the drawing board. . . . . . . .

  • 0

Qwerky windows flaws eh?

  ramesees said:
Now if only I could make the pages print properly in landscape mode, I'd be done.

I've tried setting

e.PageSettings.Landscape = true

in the PrintPage event handler, but it doesnt work the way I want it to.

Back to the drawing board. . . . . . . .

You would have thought that would be the answer, but alas no, you have to apply that setting earlier:

public void DoPrint(string printerName) {
   PrintDocument document = new PrintDocument();
   document.PrinterSettings.PrinterName = printerName;
   document.DefaultPageSettings.Landscape = true;
   document.PrintPage += new PrintPageEventHandler(this.PrintPage);
   document.Print();
}

protected void PrintPage(object sender, PrintPageEventArgs e) {
   // do work
}

Hope that helps!

  • 0

Hi Antaris, thanks for your help, I tried that but that doesnt work either :(

I am working with custom written print code and I need to make it physically rotate the output on the page (like landscape, only every control and text box etc... has to be rotated by 90 degrees).

So its the mapping of one set of co-ordinates to another thats kind of got me a little stumped.

  • 0

Any gurus want to offer an explanation to this little doozey ?

I have some very simple test code to test whether or not the network printer I am printing to is valid or not (based on its name)

When I have it for printer 1 (example) I get True before and after I change the printer name

PrintDocument pd = new PrintDocument();

Console.WriteLine("PrinterSettings: {0}", pd.PrinterSettings.IsValid.ToString());
pd.PrinterSettings.PrinterName = @"\\printserver\printer1"
Console.WriteLine("PrinterSettings: {0}", pd.PrinterSettings.IsValid.ToString());

However when I have it for printer 2 (example) I get True before and False after I change the printer name.

Although when I delete printer 2 from Printers and Faxes and add it again, I get True, True, but any change to the printer preferences of this printer gives True, False again.

PrintDocument pd = new PrintDocument();

Console.WriteLine("PrinterSettings: {0}", pd.PrinterSettings.IsValid.ToString());
pd.PrinterSettings.PrinterName = @"\\printserver\printer2"
Console.WriteLine("PrinterSettings: {0}", pd.PrinterSettings.IsValid.ToString());

I am absolutely tearing my hair out over this now, and am about to throw it in the bin (figuratively of course).

Does anyone have any advice to offer me, network related, or hardware, or anything, it would be so much appreciated.

Thanks :D

By the way, printer 2 is a lexmark t644 printer, if that helps anything.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Isn't the CPU used to calculate the parity for the RAID? If so, the combination of SSDs and 10GBe might make the CPU more important
    • yeah GSMA began working to enable end to end encryption between android and iphone last year and apparently a new standard was developed. apple has said that they would implement this in "future software updates" but i haven't heard anything since march, the time this was all reported on. shortly after, i read on forbes that the FBI suggests not sending texts between iphone and android because they're unencrypted. i use signal to chat with my wife but i'd rather just use messages tbh (she has an iphone), i'm not really a 3rd party guy haha
    • Well, I did not like the trailer for the project he went to work on also, but why do you think he should waste time with this… did you love the season 2? Maybe I am missing out after the crap I saw in first season ep1-3? I love the first last of us game… while not the BEST it was one of the games that I will remember for the EXPERIENCE it game me… last of us 2 was not on the same level at all and the show🤔 complete miss in my experience of the first few level
    • They're likely moving all resources to other things. Clearly Windows is not important to them.
    • Image Uploader 1.4.3 Build 5352 by Razvan Serea Image Uploader is a free and open-source program for Windows that that allows you to effortlessly upload images, screenshots, and various files to a wide array of hosting services. With its capability to capture selected screen areas, it promptly uploads content to image hosting services, while also offering the convenience of automatically copying the URL to your clipboard. Key Features of Image Uploader: Upload to Multiple Hosting Services Image Uploader supports uploading images and files to over 30 popular hosting services. Additionally, it can upload directly to your own FTP, SFTP, or WebDAV server. After upload, the tool automatically generates sharing codes in HTML, BBCode, and Markdown, with support for custom output templates tailored to your needs. Video Frame Grabbing and Screenshot Tools You can extract multiple frames from video files in a wide range of formats including AVI, MP4, MKV, WMV, and more. It supports both system-installed codecs and built-in ones. The extracted frames can be uploaded individually or compiled into a single mosaic image. It also includes screenshot capabilities for the full screen or selected regions, along with a simple image editor for annotations, highlights, and blurring. Advanced Integration and Usability Image Uploader supports drag-and-drop, clipboard monitoring, and can be accessed via Windows Explorer’s context menu. It also features URL shortening, multi-account support, reuploading, and the ability to upload images embedded in text while retaining formatting. The app is available in several languages, including English, Russian, Turkish, Korean, Arabic, and more. Image Uploader 1.4.3 Build 5352 changelog: New Features Screen Recording: Added two powerful capture methods: DirectX (Desktop Duplication API) FFmpeg-based recording Expanded Hosting Services: Added support for new file hosting platforms: TeleBox (linkbox.to) take-me-to.space ranoz.gg webshare.cz lobfile.com imgpx.com freeimghost.net radikal.cloud anonpic.org fotozavr.ru imgtr.ee thumbsnap.com 8upload.com filemail.com Others Video Uploads: Added Flickr.com support for video uploads Localization: New French translation added Context Menu: Added "File Information" option to video file context menus DPI Support: Improved support for: Screen DPI changes Mixed-DPI multi-monitor setups Improvements Disabled application window animations during screenshot/screen recording initiation Updated API and documentation Improved overall stability Bug Fixes Fixed network client error that could cause application crashes Resolved unauthorized startup registration issue Fixed upload functionality for pixeldrain.com Restored tray icon balloon notifications visibility Various minor bug fixes Download: Image Uploader 64-bit | Portable 64-bit | ~16.0 MB | (Open Source) Download: Image Uploader 32-bit | Portable 32-bit | ~15.0 MB Download: Image Uploader ARM64 | Portable ARM64 | ~11.0 MB Links: Image Uploader Home Page | Screenshot | GitHub Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      SteveJaye earned a badge
      Reacting Well
    • One Month Later
      MadMung0 earned a badge
      One Month Later
    • One Month Later
      Uranus_enjoyer earned a badge
      One Month Later
    • Week One Done
      Philsl earned a badge
      Week One Done
    • Week One Done
      Jaclidio hoy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      431
    2. 2
      ATLien_0
      156
    3. 3
      +FloatingFatMan
      148
    4. 4
      Nick H.
      64
    5. 5
      +thexfile
      62
  • Tell a friend

    Love Neowin? Tell a friend!