Recommended Posts

Hi, I have Metal Gear Solid 2: Substance, and installed it on Vista, but when I run it I just get a blank screen. Any ideas on how to fix this? I see that many people have this issue with the game, but have not seen anyone actually solve it. My specs are: Intel Core 2 Duo CPU, 2GB RAM, 500GB HDD, Radeon HD video card and Sound Blaster X-Fi. I've tried the obvious things like updating drivers and such, with no luck. I've even tried installing the patch, but that didn't help either.

I've also asked this question in several places, and have never found any solution that worked. So if you can solve this, you're a God!

Link to comment
https://www.neowin.net/forum/topic/614621-mgs2-and-vista/
Share on other sites

The game seems to have problems with Vista because Vista's DirectSound implementation is only emulated in software and therefore lacks hardware acceleration, which MGS2 seems to require. However, there is a workaround named "Creative ALchemy" (it can be found here), which translates DirectSound calls to OpenAL. MGS2 (and other games requiring DirectSound hardware acceleration) should run fine after you configure it.

I also used to have this problem (I also have an X-Fi video card), and ALchemy fixed it. :)

Link to comment
https://www.neowin.net/forum/topic/614621-mgs2-and-vista/#findComment-589147605
Share on other sites

Once you have downloaded and installed it, start it, click the "Add" button and enter "Metal Gear Solid 2" (or whatever you like, without the quotes) in the "Game Title" section. Select "Use Game Path" and enter the path where the game is installed (C:\Program Files\KONAMI\METAL GEAR SOLID 2 SUBSTANCE, by default), click "Install into Sub Folder", enter "bin" (without quotes), and click "OK". Now open "Computer" and find the game's path within (again, normally C:\Program Files\KONAMI\METAL GEAR SOLID 2 SUBSTANCE), enter the "bin" folder contained within it and set the game's exe to Windows XP SP2 compatibility mode, start MGS2 and configure the sound. Then check the sound section and make sure that the only sound options available are your Sound Blaster X-Fi and "Primary Sound Device".

Now you can start and it should run perfectly, just as it did for me. :)

Edited by Crashed
Link to comment
https://www.neowin.net/forum/topic/614621-mgs2-and-vista/#findComment-589147721
Share on other sites

Thank you very much, that worked brilliantly and I am now able to play the game. Crashed, you are a genius and a God, seriously! As I said, I have asked this same question on several different places on the internet, but got no solution from anyone which actually worked. Yours worked like a charm though! Thanks for making everything so simple for me!

Thanks once again!

Link to comment
https://www.neowin.net/forum/topic/614621-mgs2-and-vista/#findComment-589147747
Share on other sites

  • 2 weeks later...

Hi there!

Realy great solution and help Crashed! But can you(or anybody) help me please, cos? I don?t have th X-Fii> or any otheSoundBlasteri> oCreativei> card(so that ALchemy can?t be installed on my PC). I?m usiConexant HD-Audio SmartAMC HD2 and have the same problem(black screen, CPU 95-97% both cores). Is there somthing(some app. which simulates these sound functions(Open AL or DirectSound hardware acceleration) "missed" in Vista)

THANX in advance!!!

Link to comment
https://www.neowin.net/forum/topic/614621-mgs2-and-vista/#findComment-589180334
Share on other sites

  • 2 months later...

i think i ahve the same problem as the above user.

It's the problem where i can't download the alchemy because i don't have xi-fi or soundblaster.

i've looked for places to download soundblaster or xi-fi, but when i start up those installers they have the same problem as when i run alchemy which is that they can't start up because i don't already have a supported device on my computer.

Does anyone know how i can get xi-fi or soundblaster on my computer

or even creative alchemy

thanks a lot for any help.

Link to comment
https://www.neowin.net/forum/topic/614621-mgs2-and-vista/#findComment-589316839
Share on other sites

  • 4 months later...

Well guys it seems that everyone is having the same problem. I have a Sony VGN-FZ28M Laptop with 200GB HDD, 4GB RAM, NVIDIA GeForce 8400m GT GPU, Sigma Tel High Defenition with Windows Vista Ultimate 32-bit. I have installed the great game Metal Gear Solid 2:Substance and when I try to load it it just comes up with a big White Screen and it just stays there doing nothing other than using CPU and nothing else. I know that "Crashed" has solved the problem for the other guy but my problem is that i do not have a Soundblaster of X-Fi Card so CAN PLEASE SOMEONE HELP ME SOLVE THIS PROBLEM BECAUSE I REALLY WANT TO PLAY THIS GAME.

Thanks Guys

Link to comment
https://www.neowin.net/forum/topic/614621-mgs2-and-vista/#findComment-589687978
Share on other sites

You need to download the program that is comparable to Alchemy(for realtek HD audio it is 3D sound back beta). I have not tested it yet, but it should work. I found it by googling: "creative alchemy realtek audio". You could probably find others the same way.

Edit: it didn't work when I tested it, but ill fiddle with it and see if i can get the game to run.

Edited by RmKuND
Link to comment
https://www.neowin.net/forum/topic/614621-mgs2-and-vista/#findComment-589702832
Share on other sites

You need to download the program that is comparable to Alchemy(for realtek HD audio it is 3D sound back beta). I have not tested it yet, but it should work. I found it by googling: "creative alchemy realtek audio". You could probably find others the same way.

Edit: it didn't work when I tested it, but ill fiddle with it and see if i can get the game to run.

If you can help me I will appreciate it very much because it does not make much sense not being able to play this game on a laptop with the spec that my one has and then being able to play newer games that demand more powerful machines.

Thanks for helping me

Link to comment
https://www.neowin.net/forum/topic/614621-mgs2-and-vista/#findComment-589706682
Share on other sites

  • 1 month later...
  • 5 months later...
  • 1 month later...
Once you have downloaded and installed it, start it, click the "Add" button and enter "Metal Gear Solid 2" (or whatever you like, without the quotes) in the "Game Title" section. Select "Use Game Path" and enter the path where the game is installed (C:\Program Files\KONAMI\METAL GEAR SOLID 2 SUBSTANCE, by default), click "Install into Sub Folder", enter "bin" (without quotes), and click "OK". Now open "Computer" and find the game's path within (again, normally C:\Program Files\KONAMI\METAL GEAR SOLID 2 SUBSTANCE), enter the "bin" folder contained within it and set the game's exe to Windows XP SP2 compatibility mode, start MGS2 and configure the sound. Then check the sound section and make sure that the only sound options available are your Sound Blaster X-Fi and "Primary Sound Device".

Now you can start and it should run perfectly, just as it did for me. :)

First, I would like to personally thank you for making me able to play this game after trying to play and giving up on it a few times in the past two years that I own vista.

It works!! yay!

However, do you know how to solve the strange sound randomness problem? Footsteps sounds like... well not like footsteps but some other annoying as hell type that (even tough your enemies can not hear), it is a bit of a mood killer.

I have a realtek HD onboard card.

Great game so far!

Thanks again!

Link to comment
https://www.neowin.net/forum/topic/614621-mgs2-and-vista/#findComment-591023646
Share on other sites

to fix the sound problems a few people have come up with fixes. most people just install SP2 for vista which will fix the problem but i disliked this idea since SP2 is still beta or RC and can only be used as a trail so i personally found after trying for hours that you can fix the problem by using 1 DLL from SP2 on vista SP1 and that will fix the problem. i posted links on how to do this here

http://uk.gamespot.com/pc/adventure/metalg...1500&page=0

hope this helps. let me know how you get on.

Link to comment
https://www.neowin.net/forum/topic/614621-mgs2-and-vista/#findComment-591038638
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Now comes with a money back guarantee instead of a replacement! Hah
    • Rufus 4.15.2391 Beta by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2391 Beta changelog: Improve the guards for using the "silent" option Improve the ability to cancel during write retries Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Media Player Classic - Home Cinema 2.7.3 by Razvan Serea Media Player Classic - Home Cinema (MPC-HC) is a free and open-source video and audio player for Windows. MPC-HC is based on the original Guliverkli project (which is no longer maintained) and contains many additional features and bug fixes. As the continuation of the original Media Player Classic, MPC-HC isn’t flashy but it works with nearly any media format. MPC-HC uses DXVA technology to pass decoding operations to your modern video card, enhancing your viewing experience. And MPC-HC supports both physical and software DVDs with menus, chapter navigation, and subtitles. Overview of features A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about: Dark interface Menu > View > Dark Theme When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons. Options > Advanced Video preview on the seekbar Options > Tweaks > Show preview on seek bar Adjust playback speed Menu > Play > Playback rate The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%): Options > Playback > Speed step Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction. Options > Playback > Output > Audio Renderer MPC-HC can remember playback position, so you can resume from that point later Options > Player > History You can quickly seek through a video with Ctrl + Mouse Scrollwheel. You can jump to next/previous file in a folder by pressing PageUp/PageDown. You can perform automatic actions at end of file. For example to go to next file or close player. Options > Playback > After Playback (permanent setting) Menu > Play > After Playback (for current file only) A-B repeat - You can loop a segment of a video. Press [ and ] to set start and stop markers. You can rotate/flip/mirror/stretch/zoom the video Menu > View > Pan&Scan This is also easily done with hotkeys (see below). There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well. Options > Player > Keys Tip: there is a search box above the table. You can stream videos directly from Youtube and many other video websites You can stream videos directly from Youtube and many other video websites Put yt-dlp.exe or youtube-dl.exe in the MPC-HC installation folder. Then you can open website URLs in the player: Menu > File > Open File/URL You can even download those videos: Menu > File > Save a copy Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder. Several YDL configuration options are found here: Options > Advanced This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder. Play HDR video This requires using madVR or MPC Video Renderer. After installation these renderers can be selected here: Options > Playback > Output Ability to search for and download subtitles, either automatically or manually (press D): Options > Subtitles > Misc Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc. Media Player Classic - Home Cinema 2.7.3 changelog: Updated LAV Filters to version 0.82 Updated MPC Video Renderer to version 0.10.4.2550 Updated MPC Audio Renderer A few crash fixes, bug fixes and small improvements. Download: MPC-HC 2.7.3 (x64) | Standalone | ~20.0 MB (Open Source) Download: MPC-HC 2.7.3 (x86) | Standalone Links: MPC-HC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft will finally let you sign in to Edge with a Google account by Usama Jawad As things currently stand, Microsoft Edge only allows you to sign in to the browser with a Microsoft Account (MSA). This allows you to sync your browser settings and other data across other devices, as long as you sign in with the same account. However, Microsoft is now modifying this mechanism in a way that will likely please many users. In an update to its Microsoft 365 Roadmap, Microsoft has indicated that it will soon let users sign into Edge using a Google account from the profile menu and the Edge sign-in screen. This will be in addition to the MSA login option, and it opens up new doors for people who prefer using Edge, but cannot be bothered to configure a Microsoft account. This brings several advantages such as the ability to sync your data across devices using just a Google account. It may even facilitate flexible single sign-on (SSO) experiences where you can quickly login to websites and services through a single Google account that is presented as the preferred sign-in option. Up until now, Microsoft allowed customers to indirectly use a Google account, by configuring a Google account as a Microsoft account, or by setting up a one-way sync option between Edge and Chrome. This is a rather interesting development, especially considering that Google Chrome still limits you to a Google account sign-in, but it will be interesting to see if the company reciprocates Microsoft's gesture in the future. This is not the only recent instance in which Microsoft has extended a handshake to Google via Edge. In April 2026, it began tracking the development of a work search banner for Google Search queries, just like the one present in Edge. However, if we go back almost seven years, to January 2020, Microsoft had emphasized that it had no plans to "integrate Google services into Microsoft Edge by default", in response to people requesting Google sign-in services on Edge. Fast-forward to today, and Microsoft is planning to release this feature in July 2026, with IT admins having the option to control its availability on Windows and macOS through the NonMicrosoftAccountSignInEnabled policy.
    • If they ever come out and say the AI is no longer accessible to the gen pop people aren't going to know how to tie their own shoelaces.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      89
    4. 4
      Steven P.
      76
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!