• 0

How to compare 1 string against multiple strings?


Question

Ok, I am a beginner at c++ and I cannot figure out the best way to compare a string to multiple strings....

Basically I want something to do this:

1. User enters name such as John Doe, but I want it to not matter if they type it in uppercase, lowercase, etc.

2. Name is checked against multiple strings such as...(john doe) (John Doe) (JOHN DOE)

3. if the name the user enters matches one of those the result is 0, or something similar.

What is the best way to do this? Is there a way that I could just type one string to compare it to the name the user enters instead of every possibility? So I need a way to compare it disregarding the uppercase, lowercase....I think.

Thanks for any help!

Also, I can never think of any programs to make for practice, is there a website with some ideas?

17 answers to this question

Recommended Posts

  • 0
  PricklyPoo said:
Ok, I am a beginner at c++ and I cannot figure out the best way to compare a string to multiple strings....

Basically I want something to do this:

1. User enters name such as John Doe, but I want it to not matter if they type it in uppercase, lowercase, etc.

2. Name is checked against multiple strings such as...(john doe) (John Doe) (JOHN DOE)

3. if the name the user enters matches one of those the result is 0, or something similar.

What is the best way to do this? Is there a way that I could just type one string to compare it to the name the user enters instead of every possibility? So I need a way to compare it disregarding the uppercase, lowercase....I think.

Thanks for any help!

Also, I can never think of any programs to make for practice, is there a website with some ideas?

Take the string and change it to all upper or all lower then compare once.

  • 0
  PricklyPoo said:
But what happens if the user enters JoHn dOE....

You take the string "JoHn dOE" convert to all upper = "JOHN DOE" then comare. If all you want to do is verify that john doe was typed regardless of case then change the case of the string and compare to match. If you have to compare against a certain case (John Doe is different then john doe) then you need multiple compares.

  • 0

It doesn't matter. It changes the entire string to upper case. If you do that, like a8ball said, you can just compare 1 time instead of doing it multiple times.

  • 0
  a8ball said:
You take the string "JoHn dOE" convert to all upper = "JOHN DOE" then comare. If all you want to do is verify that john doe was typed regardless of case then change the case of the string and compare to match. If you have to compare against a certain case (John Doe is different then john doe) then you need multiple compares.
  IceBreakerG said:
It doesn't matter. It changes the entire string to upper case. If you do that, like a8ball said, you can just compare 1 time instead of doing it multiple times.

Oh, I see now, thanks!

  • 0

I just tried to make a quick program but I must be doing a lot wrong since I am getting errors, please help! :p

#include<iostream>
#include <cctype>
#include<string>
using namespace std;

int main()
{

	char johndoe[] = "john doe";
	char name[50];

	cout << "Please Enter Your First And Last Name.\n" << endl;

	cin.getline(name, 50, '\n');

	name=tolower(name);

   if (strcmp(johndoe, name) = 0 ){

	cout << "You Are John Doe.\n";
	}
	else {
		 cout << "You Are Not John Doe.";
		 }
	return 0;
}

  • 0

Hi Prickly,

Some problems, tolower seems to expect one character, and it returns an int.

http://www.cplusplus.com/reference/clibrar...pe/tolower.html

So you need to loop through each character in your name (you know the number of times you have to loop by checking the length of your string), and convert them one by one.

  • 0

Thanks for the help!

I am just really having a hard time understanding this. :(

I tried to just use the code on that cplusplus website and replace it with my variables but it didn't work. :/

#include<iostream>
#include <cctype>
#include<string>
using namespace std;

int main()
{
	int i=0;
	char johndoe[] = "john doe";
	char name[50];

	cout << "Please Enter Your First And Last Name.\n" << endl;

	cin.getline(name, 50, '\n');

	while (johndoe[i])
	{
		  name=johndoe[i];
		  putchar (tolower(name));
		  i++;
		  }


   if (strcmp(johndoe, name) = 0 ){

	cout << "You Are John Doe.\n";
	}
	else {
		 cout << "You Are Not John Doe.";
		 }
	return 0;
}

It just comes up with the char to int problem and incompatible types in assignment of `char' to `char[50] messages.

So I need to just do them one by one and keep looping? Isn't there a better way? What if I wanted to compare multiple strings, I would have to do a loop for each one then?

  • 0

You can also make it a bit more complex and make use of the <algorithm> header:

#include &lt;iostream&gt;
#include &lt;string&gt;
#include &lt;algorithm&gt;
#include &lt;cctype&gt;

int main ()
{
	std::string x = "John Doe";

	// transform(iterator start, iterator finish, iterator initialResultPosition, UnaryFunction op);
	// initialResultPosition - where to start storing the result for each iteration
	// (it is automatically incremented each iteration)
	// op - a pointer to a function
	std::transform(x.begin(), x.end(), x.begin(), toupper);
	std::cout &lt;&lt; x &lt;&lt; std::endl;
}

If you need more info, feel free to check out cplusplus.com's entry on the transform algorithm or cppreference.com's entry on the transform algorithm (or both). Note that cppreference keeps things simple. cplusplus.com prefers to give examples, and specify a LOT more on the page, which can make it difficult to figure out what you need to read.

Edit:

If you want to still do it without the algorithm, here it is:

for (int i = 0; i &lt; someString.length(); i++)
	someString[i] = toupper(someString[i]);

Edited by rpgfan
  • 0

Thanks rpg, I used the second code you posted and it works.

#include&lt;iostream&gt;
#include &lt;cctype&gt;
#include&lt;string&gt;
#include &lt;algorithm&gt;
using namespace std;

int main()
{

	string x = "john doe";
	string y;

	cout &lt;&lt; "Please Enter Your First And Last Name.\n" &lt;&lt; endl;

	getline(cin, y, '\n');

   for (int i = 0; i &lt; y.length(); i++)
	y[i] = tolower(y[i]);

   if (strcmp (x,y) == 0);
   {
			  cout &lt;&lt; "You Are John Doe.";

   cin.get();
}

The only problem is strcmp, it says I need two const chars, does that mean I have to save the results of the tolower function to chars somehow and then run strcmp?

  • 0

You shouldn't need to use strcmp. You can just use the '==' operator when you use C++ strings. :)

However, if you really needed to use strcmp, you would use strcmp(x.c_str(), y.c_str()). The c_str member function returns a C-string, a null-terminated array of chars.

  • 0
  rpgfan said:
You shouldn't need to use strcmp. You can just use the '==' operator when you use C++ strings. :)

However, if you really needed to use strcmp, you would use strcmp(x.c_str(), y.c_str()). The c_str member function returns a C-string, a null-terminated array of chars.

Hehe oh, ok.

Works perfectly now thanks!

#include&lt;iostream&gt;

using namespace std;

int main()
{

	string x = "john doe";
	string y;

	cout &lt;&lt; "Please Enter Your First And Last Name.\n" &lt;&lt; endl;

	getline(cin, y, '\n');

   for (int i = 0; i &lt; y.length(); i++)
	y[i] = tolower(y[i]);

   if ( x == y )
   {
			  cout &lt;&lt; "You Are John Doe.";
			  }
   else 
   {
		cout &lt;&lt; "You Are Not John Doe.";
		}

   cin.get();
}

Here it is if anyone other beginner ever needs it as a reference. :p

  • 0

Oh, and I should note that the loop should actually use an unsigned integer, not a signed integer, which is the default if no signed/unsigned specifier is...specified.

The reason for this is because the length member function returns a size. Obviously, you can have a zero-length (empty) string, but you can't go any lower than 0, which is why it should be unsigned. In fact, gcc complains about comparing a signed value (the loop variable) with an unsigned value (x.length()).

Happy coding! :)

  • 0

Quickly threw this together. Untested - but should work.

#include &lt;iostream&gt;
#include &lt;string&gt;

int main()
{
	std::string name;
	std::string nameCompare = "John Doe";

	std::cout &lt;&lt; "Enter name: ";
	getline(std::cin, name);

	if (name.compare(nameCompare) == 0)
	{
		std::cout &lt;&lt; "identical" &lt;&lt; std::endl;
	}
	else
	{
		std::cout &lt;&lt; "not identical" &lt;&lt; std::endl;
	}
}

EDIT: Nevermind, didn't see that you wanted to check for varying cases.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • 1. DRM is the worst plague, I like my games clean. 2. Third party launchers are an overhead and annoyance.
    • Amazon lays off more staff across Goodreads and Kindle divisions by Hamid Ganji Dozens of Amazon employees working on the retailer's book divisions have been laid off. As reported by Reuters, Amazon confirmed that it's cutting jobs across the Goodreads review site and Kindle units, which impacts fewer than 100 workers. Amazon says the recent layoffs across Goodreads and Kindle divisions are meant to improve efficiency and streamline operations. The giant retailer has constantly reduced staff across various divisions over the past few years. According to CEO Andy Jassy, reducing headcounts helps the company to eliminate bureaucracy. "As part of our ongoing work to make our teams and programs operate more efficiently and to better align with our business roadmap, we've made the difficult decision to eliminate a small number of roles within the Books organization," an Amazon spokesperson said. Layoffs recently impacted employees in Amazon's Wondery podcast division, devices and services units, communications, and in-store staff. However, Amazon's Q1 results show the retailer has added about 4,000 jobs compared to Q4 2024. After the Covid pandemic settled down, many companies began laying off thousands of staff they hired during the pandemic to respond to growing demands. The layoff trend among tech firms still exists today, and AI has amplified it. The latest data shows that in 2025, about 62,832 tech employees were laid off across 141 tech companies. Also, 152,922 tech employees across 551 companies were laid off in 2024. More layoffs are expected to occur due to declining economic growth, tariffs, and the expansion of AI across companies. Amazon is also gearing up to double down in AI investments and robotics. The company has recently announced the forming of a new agentic AI team to develop an agentic AI framework for use in robotics. Also, a new report by The Information indicates that Amazon has begun testing humanoid robots for package delivery.
    • Major Privacy 0.98.1.1 Beta by Razvan Serea MajorPrivacy is a cutting-edge privacy and security tool for Windows, offering unparalleled control over process behavior, file access, and network communication. It is a continuation of the PrivateWin10 project. By leveraging advanced kernel-level protections, MajorPrivacy creates a secure environment where user data and system integrity are fully safeguarded. Unlike traditional tools, MajorPrivacy introduces innovative protection methods that ensure mounted encrypted volumes are only accessible by authorized applications, making it the first and only encryption solution of its kind. MajorPrivacy – Ultimate Privacy & Security for Windows key features Process Protection – Isolate processes to block interference from unauthorized apps, even with admin privileges. Software Restriction – Block unwanted apps and DLLs to ensure only trusted software runs. Revolutionary Encrypted Volumes Secure Storage – Create encrypted disk images for sensitive data. Exclusive Access – Unlike traditional tools, only authorized apps can access mounted volumes—blocking all unauthorized processes. File & Folder Protection – Lock down sensitive files and prevent unauthorized access or modifications. Advanced Network Firewall – Control which apps can send or receive data online. DNS Monitoring & Filtering – Track domain access and block unwanted sites (Pi-hole compatible filtering coming soon). Tweak Engine – Disable telemetry, cloud integration, and invasive Windows features for better privacy. Why MajorPrivacy? Kernel-Level Security – Protects at the deepest system level. Unmatched Encryption Protection – Keeps mounted volumes safe from all unauthorized access. Full System Control – Block, isolate, or restrict processes as needed. Enhanced Privacy – Stops Windows & apps from collecting unnecessary data. Perfect for privacy-conscious users, IT pros, and anyone who wants total system control. Major Privacy 0.98.1.1 Beta changelog: The 0.98.1 release of MajorPrivacy introduces significant enhancements and a number of critical fixes aimed at improving usability, localization, and system integration. A major new feature is the introduction of full translation support, allowing the application interface and tweaks to be localized into multiple languages. Initial translations include AI-assisted German and Polish versions, a community-contributed Turkish translation, and Simplified Chinese. Users interested in contributing translations or adding new languages are encouraged to participate via the forum. This version also improves compatibility and deployment by bundling the Microsoft Visual C++ Redistributable with the installer, which is required for the ImDisk user interface. Several important bugs have been resolved. The installer now correctly removes the driver during uninstallation. Tweak definitions have been cleaned up for better consistency. A number of networking issues were addressed, including failures related to network shares and incorrect handling of mapped drive letters. It is now required to use full UNC paths for defining rules involving shared resources. Additionally, configuration persistence issues on system shutdown have been fixed, as well as problems affecting protected folder visibility and rule precedence involving enclave conditions. Finally, the underlying driver code has been refactored, laying the groundwork for better maintainability and future enhancements. MajorPrivacy-v0.98.1.1.exe (0.98.1a) hotfix for #71 Download: Major Privacy 0.98.1.1 Beta | 47.4 MB (Open Source) View: MajorPrivacy Home Page | Github Project page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • First Post
      Uranus_enjoyer earned a badge
      First Post
    • Week One Done
      Uranus_enjoyer earned a badge
      Week One Done
    • Week One Done
      jfam earned a badge
      Week One Done
    • First Post
      survivor303 earned a badge
      First Post
    • Week One Done
      CHUNWEI earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      430
    2. 2
      +FloatingFatMan
      239
    3. 3
      snowy owl
      212
    4. 4
      ATLien_0
      211
    5. 5
      Xenon
      157
  • Tell a friend

    Love Neowin? Tell a friend!