• 0

How to compare 1 string against multiple strings?


Question

Ok, I am a beginner at c++ and I cannot figure out the best way to compare a string to multiple strings....

Basically I want something to do this:

1. User enters name such as John Doe, but I want it to not matter if they type it in uppercase, lowercase, etc.

2. Name is checked against multiple strings such as...(john doe) (John Doe) (JOHN DOE)

3. if the name the user enters matches one of those the result is 0, or something similar.

What is the best way to do this? Is there a way that I could just type one string to compare it to the name the user enters instead of every possibility? So I need a way to compare it disregarding the uppercase, lowercase....I think.

Thanks for any help!

Also, I can never think of any programs to make for practice, is there a website with some ideas?

17 answers to this question

Recommended Posts

  • 0
  PricklyPoo said:
Ok, I am a beginner at c++ and I cannot figure out the best way to compare a string to multiple strings....

Basically I want something to do this:

1. User enters name such as John Doe, but I want it to not matter if they type it in uppercase, lowercase, etc.

2. Name is checked against multiple strings such as...(john doe) (John Doe) (JOHN DOE)

3. if the name the user enters matches one of those the result is 0, or something similar.

What is the best way to do this? Is there a way that I could just type one string to compare it to the name the user enters instead of every possibility? So I need a way to compare it disregarding the uppercase, lowercase....I think.

Thanks for any help!

Also, I can never think of any programs to make for practice, is there a website with some ideas?

Take the string and change it to all upper or all lower then compare once.

  • 0
  PricklyPoo said:
But what happens if the user enters JoHn dOE....

You take the string "JoHn dOE" convert to all upper = "JOHN DOE" then comare. If all you want to do is verify that john doe was typed regardless of case then change the case of the string and compare to match. If you have to compare against a certain case (John Doe is different then john doe) then you need multiple compares.

  • 0

It doesn't matter. It changes the entire string to upper case. If you do that, like a8ball said, you can just compare 1 time instead of doing it multiple times.

  • 0
  a8ball said:
You take the string "JoHn dOE" convert to all upper = "JOHN DOE" then comare. If all you want to do is verify that john doe was typed regardless of case then change the case of the string and compare to match. If you have to compare against a certain case (John Doe is different then john doe) then you need multiple compares.
  IceBreakerG said:
It doesn't matter. It changes the entire string to upper case. If you do that, like a8ball said, you can just compare 1 time instead of doing it multiple times.

Oh, I see now, thanks!

  • 0

I just tried to make a quick program but I must be doing a lot wrong since I am getting errors, please help! :p

#include<iostream>
#include <cctype>
#include<string>
using namespace std;

int main()
{

	char johndoe[] = "john doe";
	char name[50];

	cout << "Please Enter Your First And Last Name.\n" << endl;

	cin.getline(name, 50, '\n');

	name=tolower(name);

   if (strcmp(johndoe, name) = 0 ){

	cout << "You Are John Doe.\n";
	}
	else {
		 cout << "You Are Not John Doe.";
		 }
	return 0;
}

  • 0

Hi Prickly,

Some problems, tolower seems to expect one character, and it returns an int.

http://www.cplusplus.com/reference/clibrar...pe/tolower.html

So you need to loop through each character in your name (you know the number of times you have to loop by checking the length of your string), and convert them one by one.

  • 0

Thanks for the help!

I am just really having a hard time understanding this. :(

I tried to just use the code on that cplusplus website and replace it with my variables but it didn't work. :/

#include<iostream>
#include <cctype>
#include<string>
using namespace std;

int main()
{
	int i=0;
	char johndoe[] = "john doe";
	char name[50];

	cout << "Please Enter Your First And Last Name.\n" << endl;

	cin.getline(name, 50, '\n');

	while (johndoe[i])
	{
		  name=johndoe[i];
		  putchar (tolower(name));
		  i++;
		  }


   if (strcmp(johndoe, name) = 0 ){

	cout << "You Are John Doe.\n";
	}
	else {
		 cout << "You Are Not John Doe.";
		 }
	return 0;
}

It just comes up with the char to int problem and incompatible types in assignment of `char' to `char[50] messages.

So I need to just do them one by one and keep looping? Isn't there a better way? What if I wanted to compare multiple strings, I would have to do a loop for each one then?

  • 0

You can also make it a bit more complex and make use of the <algorithm> header:

#include &lt;iostream&gt;
#include &lt;string&gt;
#include &lt;algorithm&gt;
#include &lt;cctype&gt;

int main ()
{
	std::string x = "John Doe";

	// transform(iterator start, iterator finish, iterator initialResultPosition, UnaryFunction op);
	// initialResultPosition - where to start storing the result for each iteration
	// (it is automatically incremented each iteration)
	// op - a pointer to a function
	std::transform(x.begin(), x.end(), x.begin(), toupper);
	std::cout &lt;&lt; x &lt;&lt; std::endl;
}

If you need more info, feel free to check out cplusplus.com's entry on the transform algorithm or cppreference.com's entry on the transform algorithm (or both). Note that cppreference keeps things simple. cplusplus.com prefers to give examples, and specify a LOT more on the page, which can make it difficult to figure out what you need to read.

Edit:

If you want to still do it without the algorithm, here it is:

for (int i = 0; i &lt; someString.length(); i++)
	someString[i] = toupper(someString[i]);

Edited by rpgfan
  • 0

Thanks rpg, I used the second code you posted and it works.

#include&lt;iostream&gt;
#include &lt;cctype&gt;
#include&lt;string&gt;
#include &lt;algorithm&gt;
using namespace std;

int main()
{

	string x = "john doe";
	string y;

	cout &lt;&lt; "Please Enter Your First And Last Name.\n" &lt;&lt; endl;

	getline(cin, y, '\n');

   for (int i = 0; i &lt; y.length(); i++)
	y[i] = tolower(y[i]);

   if (strcmp (x,y) == 0);
   {
			  cout &lt;&lt; "You Are John Doe.";

   cin.get();
}

The only problem is strcmp, it says I need two const chars, does that mean I have to save the results of the tolower function to chars somehow and then run strcmp?

  • 0

You shouldn't need to use strcmp. You can just use the '==' operator when you use C++ strings. :)

However, if you really needed to use strcmp, you would use strcmp(x.c_str(), y.c_str()). The c_str member function returns a C-string, a null-terminated array of chars.

  • 0
  rpgfan said:
You shouldn't need to use strcmp. You can just use the '==' operator when you use C++ strings. :)

However, if you really needed to use strcmp, you would use strcmp(x.c_str(), y.c_str()). The c_str member function returns a C-string, a null-terminated array of chars.

Hehe oh, ok.

Works perfectly now thanks!

#include&lt;iostream&gt;

using namespace std;

int main()
{

	string x = "john doe";
	string y;

	cout &lt;&lt; "Please Enter Your First And Last Name.\n" &lt;&lt; endl;

	getline(cin, y, '\n');

   for (int i = 0; i &lt; y.length(); i++)
	y[i] = tolower(y[i]);

   if ( x == y )
   {
			  cout &lt;&lt; "You Are John Doe.";
			  }
   else 
   {
		cout &lt;&lt; "You Are Not John Doe.";
		}

   cin.get();
}

Here it is if anyone other beginner ever needs it as a reference. :p

  • 0

Oh, and I should note that the loop should actually use an unsigned integer, not a signed integer, which is the default if no signed/unsigned specifier is...specified.

The reason for this is because the length member function returns a size. Obviously, you can have a zero-length (empty) string, but you can't go any lower than 0, which is why it should be unsigned. In fact, gcc complains about comparing a signed value (the loop variable) with an unsigned value (x.length()).

Happy coding! :)

  • 0

Quickly threw this together. Untested - but should work.

#include &lt;iostream&gt;
#include &lt;string&gt;

int main()
{
	std::string name;
	std::string nameCompare = "John Doe";

	std::cout &lt;&lt; "Enter name: ";
	getline(std::cin, name);

	if (name.compare(nameCompare) == 0)
	{
		std::cout &lt;&lt; "identical" &lt;&lt; std::endl;
	}
	else
	{
		std::cout &lt;&lt; "not identical" &lt;&lt; std::endl;
	}
}

EDIT: Nevermind, didn't see that you wanted to check for varying cases.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Sure, that must be why it was revealed at the Sony showcase... the game was announced 5 years ago and the visuals are far from poor, what the hell are you smoking, plus the Switch 2 is pretty much on par with an Xbox Series S. It would be absolutely stupid for a dev to build a game "with the Switch 2 in mind" when it's coming to all platforms were the majority of sales will happen.
    • The Irony... China wouldn't be what it is today without Apple 😂
    • Microsoft makes it easier to find PC specs in Windows 11 Settings by Taras Buria Windows 11 has already received several improvements that make it easier to learn about your computer's specifications. Recently, Microsoft released Spec Cards for the System > About section, which provide basic information about the PC's main components, such as processor, memory, storage, graphics card, and video memory. Now, the Settings app is getting a new way to find your device info. Microsoft wants to display basic device information right on the Home page of the Settings app. The latest preview builds from the Dev and Beta Channels introduced a new "Your device info" card for the Settings' Home page. It displays specs like processor name and speed, graphics card and the amount of video memory, storage, and RAM. The card also has a link to the "About" section, where you will find more information about your computer, its Windows edition, product ID, and the recently introduced FAQ section that answers common hardware-related questions. The "Your device info" card joins the existing cards on the Settings app's home page. While the section offers useful information like quick access to Bluetooth devices, Wi-Fi, personalization, and recommended settings, users received it with mixed reactions, as many considered it another way for Microsoft to promote its services and subscriptions like Microsoft 365, OneDrive, and Game Pass (seriously, who thinks about Game Pass when opening Settings?). Now, the Settings' Home page is a bit more useful, as it saves you a few clicks when checking your computer's specs. If you want to test the new "Your device info" card, update your PC to build 26200.5622 or newer (Dev Channel). Just keep in mind that Microsoft is rolling it out gradually, and it requires signing in with a Microsoft Account in the United States. Other changes in build 26200.5622 include a new Settings section for Quick Machine Recovery, widget improvements, more app recommendations in the "Open with" dialog, and more. Check out the full release notes here.
    • Ponies will finally have good games to play after replaying Last of Us for the 100th time. Oh and I lied, Silent Hill f looks pretty great too, but we already knew about that.
  • Recent Achievements

    • Week One Done
      jbatch earned a badge
      Week One Done
    • First Post
      Yianis earned a badge
      First Post
    • Rookie
      GTRoberts went up a rank
      Rookie
    • First Post
      James courage Tabla earned a badge
      First Post
    • Reacting Well
      James courage Tabla earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      397
    2. 2
      +FloatingFatMan
      177
    3. 3
      snowy owl
      170
    4. 4
      ATLien_0
      167
    5. 5
      Xenon
      134
  • Tell a friend

    Love Neowin? Tell a friend!