[Review] Canon Pixima MP210


Recommended Posts

Intro.

I was in the market for a printer to replace my old HP Deskjet 3845, its ink was empty so I thought it's wise to add a few $$ and get a newer/better one specially as I needed a new scanner too. My main concern in a printer is the output quality and price. Features like built in memory reader or large LCD etc.. don't matter to me because I wont use it, so reading reviews and asking friends and here on Neowin I felt like the Canon MP210 is the one to get at the $65 mark for an All-in-one device.

Product specs and features

Canon PIXMA MP210 @ Canon website

Package contents and photos

- Pixima MP210 All-in-one inkjet printer.

- Cartridges: PG-30 Black, CL-31 Color

- Power Cord

- Document/warranty/installation kit and 2 CDs.

As usual, no USB cable is included, so you will need to buy one too (standard printer USB2 cable).

(click on the image to see the full size)

contents.jpg front.jpg scanner.jpg

buttons-led.jpg paper.jpg printer.jpg

Hardware Installation

It was easy, you take it out of the box (duh!), install the cartridges using the very simple instructions printed on the device body, install the drivers then connect the cables and you're ready to go.

Driver and Software

My PC runs Windows Vista SP1 RC 64-bit which may be a challenge to some printers but it's not the case for relatively new ones and the MP210 was no exception, though I didn't check the installation CD and grabbed the drivers off Canon website. The installation process was straightforward and trouble free.

Operation Notes

- The printers comes with small capacity cartridges, but it can take the larger ones (PG-40 for black and CL-41 for color).

- It has a feature called "Quiet Mode" which allows to reduce operating noise for night or silent operation.

- Printing noise is in the normal range but the scanner is noisy while previewing (though it's fast).

- Device takes some time to startup, around 20-30 seconds.

Output quality

For the printer: I'm very impressed, the print/color quality is much better than my old one (HP Deskjet 3845). I tried also to print a photo on a Canon glossy paper and I must say that I didn't expect a $65 printer to provide such a great output quality! I'd say it's a lab quality photo print if I like to stretch things up, but to be exact, very near to it!

This is a glossy print from the MP210 at the highest quality settings, and rescanned at 1200dpi using the MP210 too:

Print-quality.jpg

For the scanner: Nothing fancy, the scanning quality is great and I have nothing to complain about.

Scanning software interface (ran from inside Photoshop "File > Import > Canon MP210", output directly to a new document):

ScanGear.jpg

Download a PC Magazine cover scanned at 600dpi un-resized and un-edited (4796x6441 - 14.6 MB):

Scanned-600dpi.jpg

Verdict

I like the MP210, I'd recommend it to anyone looking for an all-in-one device in the $65 price tag, and can sacrifice the LCD/memory reader and other advanced features in order to get decent quality and speed for a bargain.

Thanks :)

Edited by Tantawi
Link to comment
https://www.neowin.net/forum/topic/616726-review-canon-pixima-mp210/
Share on other sites

Nice review. I just got the MP160 model for under $50 and I'm very happy with it. I think this one has a usb port too. Not like I'd ever use it. :D

A friend of mine has the MP160 too and it's how I know the world of cheap AND quality Canon all-in ones :D It's very similar to the MP210, the later only has improvement on the noise and speed side (tiny improvement), though they don't share the same design. But the MP160 comes with the larger ink cartridge already ;) Good choice (Y).

Great review. How is the Mac compatibility?

Thanks. Canon site states: OS Compatibility: Windows Vista™, Windows XP/2000 and Mac OS? X v.10.2.8 to 10.4.x. I don't have a Mac around so I can't really test compatibility with Leopard, sorry.

nice. i've been looking for an all-in-one. do you have any examples of the scans? also, does it have special scanning software or can you scan into a program like photoshop?

I just updated the "Output quality" section of the review with both samples from print and scan, including the software:))

What a coincidence, I just received a Canon MP210 by amazon this morning.

Congratulations :D

Good quality and cheap! (Y) Although in your photo example the print has color level changes.

Congratulations.

Yes, there's a small color difference but totally expectable in this price (or may be it's the paper quality?), it's not a big deal for me since I don't print professionally, just for casual use :) Thanks Ayman.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ford execs say they made a mistake when they replaced human engineers with AI by David Uzondu Ford recently announced that over the last three years, it's had to rehire about 350 "gray beard" engineers to mentor younger staff and reprogram diagnostic systems and AI tools that were failing to meet up to quality expectations. The company's VP of vehicle hardware engineering, Charles **** said that leaders overlooked the deep experience of veterans who survived many product cycles. **** admitted that simply replacing them with AI was a huge mistake, and that while AI is "a fantastic tool," it remains "only as good as the information you use to train it." The rehired engineers now run mandatory meetings to troubleshoot vehicles and reprogram automated engineering software and AI tools to prevent glitches before production. These technical specialists hunt for failure points before parts ever reach the plant floor, helping prevent the massive recalls and defects that previously cost the company billions as it aims to cut one billion dollars in expenses this year. In last year's JD Power Quality Survey, an annual study that measures the quality of a car during the first three months of ownership, Ford finished 10th among mainstream brands and scored below the industry average. But this year, JD Power ranked the automaker as the top mainstream brand, placing it above the likes of Toyota Motor Corp. and Honda Motor Co. Ford attributed this massive improvement directly to the expertise of these returned engineers. Ford's realization that AI cannot magically design and test quality vehicles without senior human oversight is just the tip of the iceberg. When Careerminds looked at companies that conducted AI-driven layoffs, researchers found out that 35.6% of those companies had to rehire more than half of the employees they previously fired. Another 32.7% had to rehire between 25% and 50% of them. In 2024, Sebastian Siemiatkowski, CEO of Klarna, proudly announced that its new chatbot was doing the work of 700 full-time customer service agents. As a result, the fintech company froze hiring and cut hundreds of positions. But by mid 2025, and into 2026, Klarna was scrambling to recruit human agents again because customer satisfaction had plummeted. It turns out, while AI is very good at answering basic questions like how to check an account balance, when faced with complex customer issues that require nuance, the thing usually resorts to the unhelpful, robotic corporate jargon we all know and love.
    • Free AI in IDEs is shifting to paid models Or you know, you could just learn to actually design and code apps, use frameworks to handle the repetitive parts and not use AI at all - and voila... free for life!
    • In a sane world US antitrust laws wouldn't even allow these companies to be in the position to be subjected to EU directives. As you say, better than oligarch nothing.
    • Apple reportedly has a second-generation iPhone Fold planned for 2027 Good grief, Apple hasn't even released a first folding phone and the Apple faithful is already obsessing over the sequel? Seriously people, go out and touch grass... because this level of obsession is borderline stalkery/neurotic.
    • I checked on the IPs associated with every login and they're all mine... And whenever I get a new prompt, there is no activity to show for it. 
  • Recent Achievements

    • Enthusiast
      Xonos went up a rank
      Enthusiast
    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
    • Apprentice
      daryld went up a rank
      Apprentice
    • Contributor
      Carltonbar went up a rank
      Contributor
  • Popular Contributors

    1. 1
      +primortal
      405
    2. 2
      +Edouard
      169
    3. 3
      PsYcHoKiLLa
      129
    4. 4
      neufuse
      69
    5. 5
      Xenon
      68
  • Tell a friend

    Love Neowin? Tell a friend!