[Review] Canon Pixima MP210

By +Tantawi
in Member Reviews

 Share

Recommended Posts

Grand Master

+Tantawi Subscriber²

Posted
  • Subscriber²
Posted (edited)

Intro.

I was in the market for a printer to replace my old HP Deskjet 3845, its ink was empty so I thought it's wise to add a few $$ and get a newer/better one specially as I needed a new scanner too. My main concern in a printer is the output quality and price. Features like built in memory reader or large LCD etc.. don't matter to me because I wont use it, so reading reviews and asking friends and here on Neowin I felt like the Canon MP210 is the one to get at the $65 mark for an All-in-one device.

Product specs and features

Canon PIXMA MP210 @ Canon website

Package contents and photos

- Pixima MP210 All-in-one inkjet printer.

- Cartridges: PG-30 Black, CL-31 Color

- Power Cord

- Document/warranty/installation kit and 2 CDs.

As usual, no USB cable is included, so you will need to buy one too (standard printer USB2 cable).

(click on the image to see the full size)

contents.jpg front.jpg scanner.jpg

buttons-led.jpg paper.jpg printer.jpg

Hardware Installation

It was easy, you take it out of the box (duh!), install the cartridges using the very simple instructions printed on the device body, install the drivers then connect the cables and you're ready to go.

Driver and Software

My PC runs Windows Vista SP1 RC 64-bit which may be a challenge to some printers but it's not the case for relatively new ones and the MP210 was no exception, though I didn't check the installation CD and grabbed the drivers off Canon website. The installation process was straightforward and trouble free.

Operation Notes

- The printers comes with small capacity cartridges, but it can take the larger ones (PG-40 for black and CL-41 for color).

- It has a feature called "Quiet Mode" which allows to reduce operating noise for night or silent operation.

- Printing noise is in the normal range but the scanner is noisy while previewing (though it's fast).

- Device takes some time to startup, around 20-30 seconds.

Output quality

For the printer: I'm very impressed, the print/color quality is much better than my old one (HP Deskjet 3845). I tried also to print a photo on a Canon glossy paper and I must say that I didn't expect a $65 printer to provide such a great output quality! I'd say it's a lab quality photo print if I like to stretch things up, but to be exact, very near to it!

This is a glossy print from the MP210 at the highest quality settings, and rescanned at 1200dpi using the MP210 too:

Print-quality.jpg

For the scanner: Nothing fancy, the scanning quality is great and I have nothing to complain about.

Scanning software interface (ran from inside Photoshop "File > Import > Canon MP210", output directly to a new document):

ScanGear.jpg

Download a PC Magazine cover scanned at 600dpi un-resized and un-edited (4796x6441 - 14.6 MB):

Scanned-600dpi.jpg

Verdict

I like the MP210, I'd recommend it to anyone looking for an all-in-one device in the $65 price tag, and can sacrifice the LCD/memory reader and other advanced features in order to get decent quality and speed for a bargain.

Thanks :)

Edited by Tantawi
Link to comment
https://www.neowin.net/forum/topic/616726-review-canon-pixima-mp210/
Share on other sites
Grand Master

+Tantawi Subscriber²

Posted
  • Author
  • Subscriber²
Posted
Nice review. I just got the MP160 model for under $50 and I'm very happy with it. I think this one has a usb port too. Not like I'd ever use it. :D

A friend of mine has the MP160 too and it's how I know the world of cheap AND quality Canon all-in ones :D It's very similar to the MP210, the later only has improvement on the noise and speed side (tiny improvement), though they don't share the same design. But the MP160 comes with the larger ink cartridge already ;) Good choice (Y).

Grand Master

+Tantawi Subscriber²

Posted
  • Author
  • Subscriber²
Posted
Great review. How is the Mac compatibility?

Thanks. Canon site states: OS Compatibility: Windows Vista™, Windows XP/2000 and Mac OS? X v.10.2.8 to 10.4.x. I don't have a Mac around so I can't really test compatibility with Leopard, sorry.

nice. i've been looking for an all-in-one. do you have any examples of the scans? also, does it have special scanning software or can you scan into a program like photoshop?

I just updated the "Output quality" section of the review with both samples from print and scan, including the software:))

Grand Master

+Tantawi Subscriber²

Posted
  • Author
  • Subscriber²
Posted
What a coincidence, I just received a Canon MP210 by amazon this morning.

Congratulations :D

Good quality and cheap! (Y) Although in your photo example the print has color level changes.

Congratulations.

Yes, there's a small color difference but totally expectable in this price (or may be it's the paper quality?), it's not a big deal for me since I don't print professionally, just for casual use :) Thanks Ayman.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Secure Boot

      By cork1958 · Posted

      Simple answer is yes, you will still get the Windows updates and as long as browser is up to date, you will be good. Only thing secure boot does is protect you against boot level threats and make it harder to install other OS's. I've been looking into this pretty thoroughly lately myself as wifes computer has secure boot disabled plus my other, older computers that run Linux, don't have secure boot enabled. Have seen all kinds of questions about this on the Linux Mint and MX Linux forums. Just don't suddenly enable secure boot now.
    • Ford execs say they made a mistake when they replaced human engineers with AI

      By TsarNikky · Posted

      How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
    • The Trump administration doesn't want you to use OpenAI's GPT-5.6 without its approval

      By TsarNikky · Posted

      Why would any self-respecting intelligent person follow any recommendation by Donald's GOP administration? With almost two years of fabrications, deceit, and blatantly illegal behavior, why believe them now? They had best be gone after the November 2026 election, so we'll wait and see.
    • AltSendme 0.4.1

      By Copernic · Posted

      AltSendme 0.4.1 by Razvan Serea AltSendme is a minimal, cross-platform application designed for fast, secure, and private peer-to-peer file transfers. It allows users to send files or entire directories directly between devices without relying on cloud servers, accounts, or any personal information. Everything is encrypted end-to-end using modern protocols like QUIC and TLS 1.3, ensuring both strong security and low-latency performance. Transfers are verified with BLAKE3 for data integrity, and interrupted downloads automatically resume, making the experience reliable even on unstable connections. You can transfer anything—images, videos, documents, and more. Integrity checks are performed on both ends, so your files are automatically verified for correctness during both sending and receiving. AltSendme works seamlessly across local networks or long-distance links, capable of saturating multi-gigabit connections for extremely fast delivery. With built-in NAT traversal and encrypted relay fallback, it connects devices almost anywhere. The app integrates with the Sendme CLI and will soon support mobile and web platforms. Fully free and open-source, AltSendme offers a lightweight, privacy-first alternative to traditional cloud-based services, removing size limits, upload costs, and unnecessary data exposure. AltSendme 0.4.1 changelog: Release Highlights Self-hosted relays: Run your own iroh relay so transfers don't rely on public infrastructure. Includes a full deployment template in deploy/relay/ with Docker Compose for a VPS and configuration examples for production use. Fly.io support: One-click deploy template for Fly.io, including a quick-start config (fly.dev.toml) for testing without a custom domain, plus production setup with Let's Encrypt and your own hostname. Relay settings UI: New Settings → Network panel to choose how AltSendme connects: automatic public relays, custom self-hosted URLs (with optional auth token), or disabled. Test connections, verify latency, and see live relay status in the footer. Disable relays: Turn off relay servers entirely when you only need same-network transfers (e.g. LAN). Direct connections only. No relay hop required when devices can reach each other. Android graduates from beta: Android is now part of the regular release cycle alongside desktop. APKs ship with each version (universal, arm64, and armv7). Other improvements Private relay access control via shared auth token Relay fallback notifications when a custom relay is unreachable Broadcast mode toggle in sharing settings Android release build fixes (split-per-ABI APKs, universal APK preservation) UI polish: mobile safe-area insets, dropzone layout, transfer progress animation Bug fixes for minification-related serialization issues and system tray icon loading What's Changed feat(relay): add relay status functionality and settings UI (a120cdf) feat(relay): implement custom relay server configuration and verification (51276c7) feat(relay): add configuration for private relay access and enhance observability features (48fbabf) feat(relay): enhance relay URL validation, display connection status (d4fffa0) feat(relay): add RelayChangeGuard component and enhance relay-related translations (16ba514) feat(broadcast): add toggle setting for broadcast mode in sharing UI (ca6d977) fix(relay): correct QUIC discovery port, pin image, templatize fly.dev (52a2ba5) fix: More broken serialization due to minification (67491a9) fix(android): preserve true universal APK across per-ABI builds (e9f256f) fix(ui): conditional safe-area insets padding on mobile (1182f0e) refactor(transfer): CircularRing component animation fix (944572b) chore(android): drop x86 and x86_64 release APKs, keep universal+arm64+armv7 (34ada0b) Download: AltSendme 0.4.1 | ARM64 | ~9.0 MB (Open Source) Download: AltSendme for MacOS | Android Links: AltSendme Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Why Delta Chat is the best decentralized messenger you have probably never tried

      By zikalify · Posted

      You are mostly right about the ephemeral nature of it. As I mention in the article, if you dont add a second device or take a backup of your account before uninstalling it, then yes you will lose access to your account. That said, in terms of actual user experience when you sync multiple devices your message history carries across and there's also a Saved Messages chat like there is on Telegram to send messages and attachments between your installs. But yh, what you point out are correct and its not trying to emulate Messenger or Telegram.

  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!