• 0

7zip in a batch file


Question

Hi,

I have a batch file that runs each day and downloads about 20 .zip files from a network share to a server which then extracts them.. before continuing with other bits and bobs

the copying is carried out by ROBOCOPY, and the extraction done by 7zip

this was all working fine til yesterday when i realised my process was falling over every time. Turns out one of the .zip files was corrupt and when it tried to extract the batch file just bombs out

7zip has a file integrity check option but i cant for life of me figure out how to get the result of this check into something like an IF THEN ELSE execute the extract part

options i have considered:

1. only copy correct files with robocopy (cant work out how to check integrity, or even if its possible)

2. do a crc on the files - not really useful as i dont know what the results should be

3. use the 7zip t flag in some manner - 7z.exe t filename.zip and generate an ERRORLEVEL in the batch... bit lost on this one??????

5. batch file try-catch 'hack' - ok i was desperate at this point... :)

can anyone figure out a clever method of making this work? i will be eternally grateful because its starting to really **** me off... :p

perhaps i could run a check, output the successful results to a file and then only extract the filenames that are contained in that file??

thanks all

a frustrated chris :|

Link to comment
https://www.neowin.net/forum/topic/622510-7zip-in-a-batch-file/
Share on other sites

5 answers to this question

Recommended Posts

  • 0

7z t -r filename.zip

might work. If you don't specify a recurse parameter, and your archive has directories inside it, it will not generate an error if the files and directories at the top level of the archive are OK.

Other than that, I have no ideas. :p

I wonder... Could it be the extraction process that is messing things up? You might consider that option, in which case you could consider using something like PicoZip to extract the files and compare the results.

  • 0
  BGM said:
3. use the 7zip t flag in some manner - 7z.exe t filename.zip and generate an ERRORLEVEL in the batch... bit lost on this one??????

Try something like:

@echo off
REM *
REM Test zip
REM *
7za.exe t filename.zip
REM *
REM 0 = no error, else error.
REM *
IF %ERRORLEVEL% == 0 ( GOTO EXTRACT ) ELSE ( GOTO ERROR )

:EXTRACT
echo.
echo Extracting zip...
echo.
GOTO END

:ERROR
echo.
echo Error: %ERRORLEVEL%
echo.

:END

  Exit Codes from 7-Zip said:
7-Zip returns the following exit codes:

Code Meaning

0 No error

1 Warning (Non fatal error(s)). For example, one or more files were locked by some other application, so they were not compressed.

2 Fatal error

7 Command line error

8 Not enough memory for operation

255 User stopped the process

  • 0
  rpgfan said:
I wonder... Could it be the extraction process that is messing things up? You might consider that option, in which case you could consider using something like PicoZip to extract the files and compare the results.

its possible i suppose, i did manage to atleast open the file with winrar...

it still gave an error mind you, i might investigate that tomorrow...

@Wilhelmus: thanks for that! ill give it a shot tomorrow, i am assuming that thats completely untested and off the top of your head???

also, i spent a good 2 hours today searching for error codes, or infact any sort of error output for 7zip so double thanks for the heads up :)

  • 0

Ok, so with the great help from Wilhelmus I finally achieved my goal! :)

Here’s the code in case anyone is interested... It accepts a path name of where the files are located as an argument at the command line and runs through all matching files checking the integrity before attempting an unzip if they are valid..

Most importantly doesn’t bomb out if they are invalid! Woo

@echo off

REM Map source location to a drive letter
NET USE z: /delete
NET USE z: \\server\folder\sub /p:yes


REM Copy all zip files in mapped folder to temp directory 
ROBOCOPY Z:\  %1 /MIN:5


REM Change to 7zip directory
cd "c:\Program Files\7-Zip"
c:


REM Process each file in the temp directory..
for /f %%a in ('dir /b %1\b_*.zip') do call :PROCESS %1 %%a
GOTO :EOF


:PROCESS
REM Test the integrity of the file
7z t %1\%2


REM 0 = no error, else error.
IF %ERRORLEVEL% == 0 ( GOTO EXTRACT ) ELSE ( GOTO ERROR )


REM Extract the valid files into the temp directory
:EXTRACT
7z e %1\%2 -o%1 -y
GOTO END


:ERROR
echo Error: %ERRORLEVEL%


:END

Edited by BGM
  • 0

Hi,

I am trying to do similar thing as you did last year. I have a bach file and need to run 7z t command to test zip files and write result in a log file.

I did something. it creates log file and test files in cmd line. I see that testing the files running on screen, but not write it into log file. I am not fimiliar with a batch file and 7zip. Please help meeee

  BGM said:
Ok, so with the great help from Wilhelmus I finally achieved my goal! :)

Here?s the code in case anyone is interested... It accepts a path name of where the files are located as an argument at the command line and runs through all matching files checking the integrity before attempting an unzip if they are valid..

Most importantly doesn?t bomb out if they are invalid! Woo

@echo off

REM Map source location to a drive letter
NET USE z: /delete
NET USE z: \\server\folder\sub /p:yes


REM Copy all zip files in mapped folder to temp directory 
ROBOCOPY Z:\  %1 /MIN:5


REM Change to 7zip directory
cd "c:\Program Files\7-Zip"
c:


REM Process each file in the temp directory..
for /f %%a in ('dir /b %1\b_*.zip') do call :PROCESS %1 %%a
GOTO :EOF


:PROCESS
REM Test the integrity of the file
7z t %1\%2


REM 0 = no error, else error.
IF %ERRORLEVEL% == 0 ( GOTO EXTRACT ) ELSE ( GOTO ERROR )


REM Extract the valid files into the temp directory
:EXTRACT
7z e %1\%2 -o%1 -y
GOTO END


:ERROR
echo Error: %ERRORLEVEL%


:END

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Garmin Dash Cam X310: 4K dash cam on sale at lowest price for $334.99 by Paul Hill Dash cam footage can be vital for drivers who get into accidents as it can be used to help with insurance claims if you’re involved in an accident, outside of that, it can be used for filming your trips or recording freak events such as asteroids burning up in the atmosphere. If you’re still without one, or looking to upgrade, take a moment to read about the Garmin Dash Cam X310 which has been reduced by 16% from $399.99 to $334.99. To briefly touch on the features before we get started, the X310 is a compact 4K Ultra HD touchscreen dash cam with a 140-degree field of view, ensuring it captures everything. There’s also a built-in Clarity Polarizer to reduce glare from the windshield and it features automatic recording. The main attraction of the Garmin Dash Cam X310 is undoubtedly the 4K Ultra HD video which will capture fine details, and the 140-degree field of view that ensures it doesn’t miss anything important. Coupled with this, the Clarity Polarizer helps to reduce glare from the windshield so that your video footage is better. It also includes HDR which improves the night vision. Aside from having a touchscreen, the X310 comes with voice control allowing you to save video and audio hands-free, meaning you can focus on driving. It supports multiple languages - English, German, French, Spanish, Italian, and Swedish. Other features include built-in GPS for recording the location, date, and time of incidents; parking guard and live view for security while parked (required a paid Vault subscription); and its compact design which allows it to sit “virtually unnoticed” on the windshield. Please note that the product description says some jurisdictions may restrict the use of dashcams, so check your local laws before buying. If you are looking for a high-resolution dash cam with voice control and advanced parking surveillance (paid subscription), the X310 could be for you. The main downside of this product is that it’s still at a premium price point, despite it being at its lowest price on Amazon. If you don’t mind this, it could definitely be a great choice for you. Garmin Dash Cam X310: $334.99 (Amazon US) / MSRP $399.99 This Amazon deal is US-specific and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon US deals page here. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • I have a Motorola B12, and it's been working pretty solidly for a year now. 
    • yes, which is especially funny considering you no longer have an option to turn them off, so how could this matter to anyone? It would be pretty evil if they waited until after Windows 10 EOL to renew the certs, but based on these dates, it looks like that wouldn't be possible, so no worries that I can see.
  • Recent Achievements

    • Week One Done
      Marites earned a badge
      Week One Done
    • One Year In
      runge100 earned a badge
      One Year In
    • One Month Later
      runge100 earned a badge
      One Month Later
    • One Month Later
      jfam earned a badge
      One Month Later
    • First Post
      TheRingmaster earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      581
    2. 2
      ATLien_0
      181
    3. 3
      +FloatingFatMan
      180
    4. 4
      Michael Scrip
      133
    5. 5
      Xenon
      122
  • Tell a friend

    Love Neowin? Tell a friend!