How to recover accidentally deleted files


Recommended Posts

Till today I have been not few times in the situation where I had erased accidentally one or more files, even from my recycle bin... and probably there is an unwritten law that says that if you gonna need more one file, it will be a file that you had deleted accidentally.

So this important file has disappeared and now we need it urgently. What do we do?

Fortunately, the way that most file systems work, don't exactly delete a file from a hard disk when we click the "magic" delete command, but actually the file is marked as deleted in the allocation table of the file system. This happens even if we delete the file from the recycle bin. The allocation table markers just say the the file is not needed any more and that other data can be written on its place.

What does it mean? That for several minutes after we delete a file, its data remain on the hard disk. And if we don't use enough our hard drive, the place where this file was stored may not be overwritten even after some days or months.

This is where the most file recovery tools do the work: they try to find data that still exist on the hard drive, although the files that these data belong to, have been marked as deleted. Then they restore the file by marking the file as existent again, in the allocation table of the file system and... voila we can use the deleted file again.

Due to my experience with lots of accidentally deleted or lost files, I have used several programs for recovering them:

- File Scavenger ($49)

- PC Inspector File Recovery (Freeware)

- InstantFileRecovery ($2)

Between them, I found slightly better working the last one (InstantFileRecovery). It is available at a very low price, so I decided to give it a try, although I had some thoughts that low price could mean low quality... wrong. It did a great job yesterday, when my little cousin deleted the whole folder with my work's documents (of course I will not let him sit in front of my computer again, at least not for the next months! :o ). It restored all the files that the folder contained, when File Scavenger managed to find almost the half of them and PC Inspector File Recovery only... 5.

Anyway, in some situations one program may work better and in some other cases another one of them may do a better work. So it is always a good idea to have 2 or 3 recovery programs, just to be sure.

Practically, the way these programs work in order to recover deleted files is very similar. Typically you run the application, you select the hard disk or partition where your deleted files were stored and you hit the search button. After some minutes (total scan time depends on the size of your hard disk) it will display a list of deleted files that have been found and can be restored. You select the files and then you select the folder where you want them to be restored.

That was all! The files are there again and you are happy... but next time be careful!

Edited by ckgni

Another great product to try is Recuva (from the same people who make CCleaner), apparently it works very well. I can't say from experience as I have luckily never been in the situation where I've needed to recover files, but from what I've heard it does a great job.

  • 3 weeks later...

I use FreeUndelete

FreeUndelete is data recovery program for deleted files.

In case of accidental deletion of files on a NTFS (used by default in Windows XP, 2000 and NT), FAT32 or FAT16 file systems FreeUndelete is the utility to help.

sc_freeundelete.gif

Link : http://www.officerecovery.com/freeundelete/

  • 1 year later...

Just an update from my previous experiences. Recuva is a horrible piece of software and takes hours to find anything if you're lucky. I also tried Undelete Plus and PC Inspector File Recovery, both working poorly.

The only decent recovery program for most files I've found is PhotoRec (http://www.cgsecurity.org/wiki/PhotoRec) combined with PhotoRec sorter afterwards (http://builtbackwards.com/projects/photorec-sorter/). The program managed to recovery pretty much all my files, even ones from months ago in just one hour for a 100 GB harddrive. While the name implies recovery of photos, it will actually recovery just about any file type, including the new microsoft xml file types, from almost any media. The program supports both Linux and Windows partitions, and even supports new filesystems such as exFAT.

  • 2 weeks later...
  • 2 years later...

I just deleted 1500 Gb blu-ray back ups. I googled "neowin recover deleted file" and found freeundelete from this thread. I was able to recover all with it, it had a option to run the program without installing which was a nice feature. All and all it took me 15 minutes to get those files back.

  • 4 months later...
  • 4 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • You literally have to do it on a desktop, which is incredibly annoying in our mobile-first world. What???
    • What part of "you can’t really depend on service providers to maintain features forever" is not clear enough?
    • Nope. That lack of surround sound capability (analog) won't fly with me. Sure, I use headphones most of the time, but still.
    • Creative Sound Blaster AE-X PCIe review: your headphones will love it by Steven Parker If you have been reading Neowin for any length of time, you may remember that I reviewed the Sound Blaster Audigy FX Pro back in April. I found it to be an excellent budget sound card, even though it lacked support for formats such as DTS over the included SPDIF port. Anyway, Creative reached out to me again asking if I was interested in reviewing the Sound Blaster AE-X. It is a card mainly targeted at headphone wearers, which I'll get into a bit later. Before we get underway, here is a disclaimer: Creative Labs provided a free sample without any review pre-approval. Here are the full specs of it: Creative Sound Blaster AE-X Dimensions: 179 x 126 x 18 mm Weight: 263g / 9.28 oz Platform: PCI-e DAC: ESS ES9039Q2M Connectivity Options Side: Rear: 1 x HD Audio Front Panel Connector, 1 x ⅛“ Headphone port, 1 x RCA Line-out (Left) port, 1 x RCA Line-out (Right) port, 1 x Coaxial SPDIF-out port, 1 x ⅛“ Mic in/Line-in port, 1 x TOSLINK SPDIF-in port Surround: No DNR / SNR: THD+N: 0.0001% Dynamic Range 130 dB Recording Resolution: PCM up to 32-bit / 192kHz (Stereo) Direct Mode: Line Out (Stereo): PCM up to 32-bit  384 kHz Coaxial SPDIF Out: PCM up to 24-bit 192.0 kHz Headphone Amp: PCM up to 32-bit / 384kHz (Stereo) Native DSD: DSD64, DSD128, DSD256 Output Impedance: 1Ω, Supported Headphone Impedance: 8–600Ω, IEM: 0.5Vrms, Low: 1.5Vrms, Mid: 3Vrms, High: 6Vrms, Maximum output power: 350mW @ 32Ω (High), Maximum output voltage: 6Vrms (High) Front Panel Headphone Amp: PCM up to 32-bit / 192kHz (Stereo) Native DSD: DSD64, DSD128 Output Impedance: 10Ω, Supported Headphone Impedance: 32–300Ω, Maximum output power: 40mW @ 32Ω, Maximum output voltage: 1.9Vrms ASIO: ASIO 2.3 Total Harmonic Distortion: THD+N: 0.0006% Dynamic Range: 114 dB Scout Mode: Yes EMI shielding: No (but it passed all the FCC emission tests) Operating temperature: 0–45°C Input Power: 12V⎓0.5A Warranty: 1 Year (MSRP) Price: $179.99 / £169.99 The Sound Blaster AE-X was announced at the end of May, and it becomes clear that it is mainly for headphone wearers. I should also note that the card does not support DDL/DTS encoding technology, but it is said to support decoding through the coaxial SPDIF port. I was able to test this working with the classic Windows Sound properties, but I could not get a DTS (decode) signal through my Logitech Z906, it defaulted to 3D sound whenever I played DTS content through Plex or Emby. In addition, this card only supports two channels (stereo) over the speakers. The surround support is limited to the Headphone Amp, so before I get underway, what we have here is a card mostly intended for headphone use, especially with its SPDIF In (Toslink) port where you could connect another device like a console. So what about the highlights of this card? The AE-X is powered by the ESS SABRE DAC (ES9039Q2M), which is capable of a 130 dB dynamic range. In addition, it supports 32-bit/384 kHz playback for deeper detail and clarity. The headphone amplifier delivers up to 350 mW @ 32Ω, which admittedly far surpasses standard onboard audio, offering support for studio-grade headphones. DSD256 and ASIO 2.3 are also supported. What doesn't it have? No support for What-U-Hear, Super X-Fi, or the SmartComms Kit No EMI shielding, but it passed all the FCC emission tests (from the FAQ) I also want to make it clear that I am no audiophile. For me, it's purely subjective and it should just "work" out of the box. First impressions As I said in the introduction, I was a bit sad to see that the AE-X only supports stereo output, meaning it would not be on par with my ALC1220 over my speakers, as I mentioned it seems like this card is marketed toward headphone users. Since I am not an avid gamer that would rule me out as a potential customer, but I can still test its capabilities! The card arrived in a nice-looking box, as shown above. It's quite a bit larger than the Audify FX Pro that I reviewed back in April, and at first I thought the covering meant that it was EMI shielded, but it isn't as mentioned above in the highlights section. What's in the box: 1 x Sound Blaster AE-X PCIe card 1 x 3.5 mm CTIA TRRS to Dual TRS Headset Splitter Cable 1 x Quick Start Guide Aside from the Quick Start Guide, which someone at my age (I guess) needs a magnifying glass to read thanks to the tiny fonts, Creative Labs also has the manual online, which first requires you to prove that you're human in order to access it (so I can't direct link it). Anyway, the box is mostly made up of cardboard, and the only plastic in it is the anti-static bag for the card itself. Design Top Bottom The card itself looks pretty cool and actually wouldn't look out of place in an all-white build. There's only one connector, and for some reason it is awkwardly placed on the side (front-facing) that is for the front panel audio connector, which will let you use the headphones through the front PC audio jack. Since the front panel Headphone Amp has fewer capabilities than the rear headphone port, I decided not to use it. Rear of card PCI-e interface The rear of the card is completely open and is normally where you would find the front panel connector. The PCIe interface side is completely covered, which initially made me think it was EMI shielded. I/O panel Side (front-facing) with Front panel connector On the outer rear bracket side we have the TOSLINK SPDIF in, Coaxial SPDIF out, RCA line out (Right), RCA line out (Left), Headphone out, and Mic/Line in ports. On the front facing portion of the card itself is the F-panel connector. Usage Test System Our test system consists of the following: AMD Ryzen 9 9950X3D Gigabyte X870E AORUS MASTER (BIOS F12) Corsair RM1000x (2024) Thermal Grizzly Kyronaut (33x33x0,2mm) 2x 32GB Kingston Fury Beast RGB DDR5 6000MT/s CL36-38-38-80 T-Force Z540 2TB (PCIe Gen5) NVIDIA GeForce RTX 5090 Founders Edition (NVIDIA) Creative Sound Blaster AE-X Windows 11 25H2 Pro I installed the card into the Gigabyte X870E AORUS MASTER which includes the RealTek ALC1220 onboard audio. For our subjective listening tests, I used the Coaxial SPDIF port to my Logitech Z906 speakers. For headphone tests I used the OneOdio Studio Max 2 Wireless DJ Headphones that I reviewed last month. After installing the audio driver, I installed Creative Nexus, which is a relatively new app designed for the latest Sound Blaster cards. Then I discovered the AE-X needed both a driver update from 1.00.15.0001 to 1.01.09.000 and a firmware update from 1.00.06.0000 to 1.00.06.0002, then I was set to go. It should be noted that the card did not work without the driver (not Plug and Play). As you can see above, you can manage the firmware, driver, and inputs via Advanced Settings on the Device tab. By default Nexus enabled "Direct Mode". Upon clicking on Acoustic Engine, the Equalizer can be enabled and set to four different presets, which are: Gaming Music Movies Footsteps Enhancer There's also a dedicated Scout Mode for gamers. I mainly used Tidal and Spotify in the past week to listen to some of my Liked Songs (which now total over 700) in Shuffle mode; there were no pops or interference that I could hear. I also found a 5.1 Surround Music playlist on Tidal that sounded really great over Studio Max 2 headphones. When I reviewed the Audigy FX Pro, I went out and purchased a Logitech Z906 set second-hand for €100 specifically to use with the card, but in this instance all I could get on the AE-X was the 3D output of surround sound through Coaxial SPDIF and although it still sounded great, it isn't quite as good as DTS Interactive via my onboard Realtek ALC1220. Conclusion So what have I learned? The AE-X lacks multi-channel support for 5.1/7.1 setups and drops support for modern surround technologies like Dolby or DTS, functioning strictly as a stereo output device. So to really benefit, you will need Studio-grade headphones to "hear" the benefits of this card. With that being said, I can imagine it will appeal to gamers who are switching between console and PC. By utilizing the SPDIF in port, you could just plug your headphones into the AE-X (front or rear port) and then switch between PC and Console without having to move the headphones to a different port. As I said in the Sound Blaster Audigy review, the EQ in the Creative Nexus app offers safe presets, which allows a user to further tweak the lows, mids, and highs for a personal listening experience. Of course it all depends on the headphones you hook up to it. Speaking of headphones, I kind of wish I had higher-quality Studio-grade headphones to really test this card with; I'm not usually wearing headphones in my day to day duties. The only time I will wear them is if I want to listen to music very late at night and I don't want to disturb my neighbors, so my rating (verdict) is based on this fact. Someone with a PC/Console setup and wears headphone religiously to game, and consume media will benefit much more than I from the high-quality Headphone Amps that are included in the AE-X. Once again, I do feel like Creative could have gone the extra mile to support the S/PDIF port a bit more. Why include it if you're not supporting the main popular digital formats? It seems like the decision was more of a legacy-based one, offering uncompressed 2-channel PCM audio, for users with high-fidelity audio systems and external DACs. Maybe I will be lucky enough to review a card that truly includes all these features in the future. I am sure readers with far more knowledge on audio systems than me will correct me in the comments below. I'll just say I am happy to learn what I don't know! Where to buy The Sound Blaster AE-X is available to purchase now in preorder for $179.99 on the U.S. Creative website, or for £169.99 on the Creative UK website and will start shipping to customers from June 25.
    • $80 or 90%, anything else would be financial suicide one way or another.
  • Recent Achievements

    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
    • One Month Later
      Genuinetonerink- Dubai earned a badge
      One Month Later
    • Week One Done
      Genuinetonerink- Dubai earned a badge
      Week One Done
    • One Year In
      hhgygy earned a badge
      One Year In
    • Week One Done
      AMV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      88
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      73
  • Tell a friend

    Love Neowin? Tell a friend!