Recommended Posts

So, as many of you know, there is now support for exFAT in Vista SP1. For those who don't know, exFAT is the file system originally introduced in Windows Embedded CE 6. It was primarily introduced into Vista SP1 for USB/Mobile devices because of its low overhead. NTFS takes up about 40MB on a freshly formated 2GB USB drive. exFAT, however, only takes up about 40kb on the same device after a fresh format. A much lighter file system with huge capabilities.

Well, to make a long story short, I decided to see what would happen if I formated one of my drives with exFAT and used it on a day by day basis. Mind you, not a USB drive. I created a 300GB partition on my internal SATA2 HDD and formated it thru the Command Prompt. Windows Vista wont give you the option to format a none USB/Mobile drive in the regular GUI. In case you're wondering, it isn't my main C: partition (I don't think my computer would boot from an exFAT partition. At least, not yet). I used the following command to format the drive:

format G: /fs:exfat /q /a:4096

Well, I've been using it for a while now. I primarily play video games from the partition. Seems to be working great. I later decided to create a second exFAT partition for video, audio, and picture storage.

I wonder if the claims that exFAT partitions don't suffer from fragmentation will prove to be correct.

Link to comment
https://www.neowin.net/forum/topic/625852-an-exfat-experiment-in-vista-sp1/
Share on other sites

The advantages over previous File Allocation Table (FAT) file system versions include:

* theoretical file size limit of 16 Exabytes

* cluster size of up to 2255 bytes, implementation limit of 32MB

* free space allocation performance improved due to introduction of a free space bitmap

* support for more than 1000 files in a single directory

* support for access control lists (not supported yet in Windows Vista SP1)

The disadvantages compared to previous FAT versions include:

* Devices using exFAT will not be able to use Windows Vista's ReadyBoost capability.

Source

I'm not sure if it's preferable over NTFS or not. It seems to have very similar features, minus the space and processing overhead.

Yep, I'm currently running Tabula Rasa, Unreal Tournament 3, and Microsoft Office from it. They seem to load and run just as well if not better.

Working on seeing if I can come up with some benchmark numbers of an exFAT vs an NTFS drive.

Ok, yes you can create junctions and symlinks on it. As far as I can tell, Vista doesn't support volume shadow on an exFAT partition. Not sure if that is a limitation of exFAT or just of Vista. No, it doesn't support EFS, and transactions aren't supported in Vista but it is an optional function of exFAT that vendors can enable on mobile devices. On the subject of security, exFAT does support ACLs but Vista SP1 doesn't support ACLs on exFAT partitions yet.

Every file system fragments files.

Yep, this is true, never understood why people think fragmentation can be eliminated, its just the nature of how data is stored... it fills the free space as needed... delete a file in the middle of a large block of data... put something larger then it in there its gona fragment... happens on HPFS, exFAX, FAT, FAT32, NTFS, and all the others... now maybe their allocation tables fragment less but the actual data storage is always going to fragment when space is needed and its only available inbetween existing files....

The NTFS version in XP (v3.1 or 5.1), or Vista or 2k8 server is no old. NTFS is not the same that is was when released with NT 3.5 back in the early 90's

The vista version is either 5.2 or 6 depending on how you look at it.

exFAT was designed for FLASH drives -- it makes little sense to use it on a normal hard drive.

exFAT introduces a free space bitmap allowing faster space allocation and faster deletes, support for files up to 264 bytes, larger cluster sizes (up to 32 MB in the first implementation), an extensible directory structure and name hashes for filenames for faster comparisons. It does not have short 8.3 filenames anymore. It does not appear to have security access control lists or file system journaling like NTFS, though device manufacturers can choose to implement simplified support for transactions

Wikipedia

The free space bitmaps are said to help reduced fragmentation as well. Contrary to the Wikipedia entry, ACLs apparently are supported by exFAT, but not supported in Vista SP1. I guess they figured that ACLs wouldn't be a needed feature on you USB thumb drive.

This really wasn't designed to be used on hard drives, it's just a replacement for the ancient FAT file system and is meant for large flash drives. It's nowhere near as advanced as NTFS. That's not to say it isn't any good, it's fine for it's intended purpose. There's just no reason to use it on hard drives, especially since Vista is designed for NTFS specifically. Until it's more widely supported it's not really that great for flash drives yet. I hope they add native support in XP SP3 and the xbox 360 at least.

Certainly nothing wrong with experimenting though. Just for curiosity I wanted to see if I could get the HPFS driver from NT 3.51 to work in Vista. It could be added to NT 4.0 and even XP after copying over the pinball.sys driver and setting up the registry. Believe it or not it still works, not that it's very useful. :laugh:

Edited by Skyfrog

Are ACLs really supported by ExFAT? I thought that was one of the biggest differentiators. The main reason being that ACLs are hard to implement across platforms (that's why NTFS drivers for Mac / Linux tend to ignore them. And ext2 / ext3 drivers for Windows do the same for Linux drives). Mainly because you have no common authentication path. ACLs tend to be meaningless when a drive is moved from one PC to another.

ExFAT isn't meant to replace NTFS, ever. It has a lot of disadvantages versus NTFS. It's meant to be a better FAT system, to replace the FAT/FAT32 filesystems that everyone has been using on portable storage devices and mobile devices.

Can an exFAT formatted flash drive be read in a computer not running Vista SP1? I use a flash drive for work and it would be interesting to try this out, however I use the drive on computers running Windows 98 sometimes, and mostly XP. So would my flash drive be readable on those computers?

They claim that Ext2/3 doesn't have fragmentation.

I wonder if this is supported in Mac/Linux or XP yet?

Ext2/3 fragment. You just don't notice it much. And they have block allocation policies which try to minimize fragmentation.

exFAT was designed for FLASH drives -- it makes little sense to use it on a normal hard drive.

Then why doesn't it have wear-leveling. I would think any file system designed for flash drive would have this feature.

Then why doesn't it have wear-leveling. I would think any file system designed for flash drive would have this feature.
Well why don't you ask the people that designed it that question ;) I did not have anything to do with its design -- I assure you :rofl:

http://download.microsoft.com/download/5/b...STO072_WH06.ppt

Personal Storage: Opportunities and challengesfor pocket-sized storage devices in the Windows world

post-14624-1205879269_thumb.jpg

If you do not like something about the file system, contact the designers.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Read this in Humor Simpson 's voice, "Out of my way Moe".
    • You still can, its just under the Transform flyout for WordArt now
    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
    • Thanks for the info, but I'm still not sure if I need this....
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!