#5 Guaranteed Steps to keep your PC running fast...


Recommended Posts

I have been working in an IT environment since high school and so I have learned a few tricks. Below are steps that if you follow and maintain them your PC is guaranteed to stay at tip top shape and will never slow down. I never leave the house without the following small applications on my flash drive. All of the applications below work on all OS versions including Vista x64.

#1 - Download and run CCleaner from http://www.filehippo.com/download_ccleaner/. This small (2.61MB) freeware application works wonders. I run it multiple times per day, but that is just because I am obssesive. If ran once a week, you would be fine. After downloading and installing there are two things you will want to do. First, run the cleaner and second, scan for issues in the registry. Depending on how old your computer is and the amount of time since you have cleaned it up, CCleaner might take up to 20 minutes to finish. Normal scan and clean is around 30 seconds if preformed regularly. I have seen this little application remove up to 20GB, yes 20GB!!, which is just absolutely amazing.

#2 - Second, download this small (0.98MB) free application SmitFraud Fix from here http://siri.urz.free.fr/Fix/SmitfraudFix.exe. This program runs directly from the .exe and starts in DOS. Once running, select #2 for clean (safe mode). It will shut down all of the unneeded processes including the explorer. Also, a little weird thing is that it removes your wallpaper. Other than that, wait for it to scan and then select ?Y? to clean the registry. After that your explorer will start back up and you can close SmitFraudFix. This tool has worked wonders for me. This is mainly used to remove any unwanted spyware. I have thrown Spysweeper, Spybot, etc. at certain spyware and this is the only tool that always works.

#3 - A classic and yet still useful tool. Go to your start menu, applications, system tools, and run the disk defragmenter.

#4 - Right click on ?My Computer? icon and click the advanced tab. Go to the performance options ?settings? tab and unselect every option except for the last two. These last two are the only two that you will notice and so you will want to leave them on.

#5 - And of course, your startup items. Clearing out the startup folder in your "Program Files" is a definite must. More advance users probably can take advantage of msconfig.

If you run through these 5 steps, and keep repeating steps #1-3 at least once a week, your PC will keep running at its finest, I promise you.

No offense, but I've been a member of this forum since you've been in 7th grade... and I can tell you 98% of the people here know this. Hell if im not mistaken, I remember seeing a post from one of the creators of CCLEANER.

As for smitfraud, It is good for certain things, and only those things. It removes rogue AntiSpyware programs. You know, the fake Anti-Spyware software that tells you, you NEED it to remove threats, all the while its downloading trojans on your computer. As for removing run of the mill spyware, it ignores it.... use Spy Sweeper. 9 of 10 things that require smitfraud come from porn sites, so if you need it.... be ashamed :)

My system seems to run faster after I quit using CCleaner. I don't know about smitfraud, and I don't think you really need to uncheck all of those items in the performance tab unless your computer is really slow, but the rest is good.

No offense, but I've been a member of this forum since you've been in 7th grade... and I can tell you 98% of the people here know this.

You're correct about most of the users on Neowin knowing about this, but really, cut Brian some slack here, He's just trying to pass along what he thinks is some useful info....

Oh and BTW .. Ive been involved in the IT profession since before you were BORN :p

I'd be suspicious about the 2nd executable, but CCleaner is good. If you feel your PC is running slower then you might be deleting prefetch data (make sure it's unchecked) or running it too often.

its fine, its really meant to be a virus removal tool

Yes, SmitFraudFix will be detected by some software as spyware or a virus however, these are false reports. The reason they consider it a virus is because because "process.exe is detected by some antivirus programs (AntiVir, Dr.Web, Kaspersky) as a "RiskTool". It is not a virus, but a program used to stop system processes. Antivirus programs cannot distinguish between "good" and "malicious" use of such programs, therefore they may alert the user."

You can actually read more about how SmitFraudFix works here http://www.beyondlogic.org/consulting/proc...processutil.htm

And I agree with you JaMDKinG :) I reformat so often that I hardly use any of my own procedures I just wrote about. Reformatting can be very addicting. But they come in handy for the average user who only reformats every year or two.

Why would you run ccleaner two or three times a day? Just have it clean automatically at startup and you won't have to deal with having to starting it up manually. Create a shortcut on your desktop and for the location, enter:

"C:\Program Files\CCleaner\CCleaner.exe" /AUTO

Place this shortcut in your startup folder, and your computer will be clean with every startup.

And on a side note, if you are using Windows Vista and you've never used the disk defragmenter, then don't touch it. Vista is set to automatically defragment all volumes and it will always find to the time to do so. Either that or you could set up your own custom schedule for Vista to defrag your volumes.

Edited by Ruiz

The answers to your questions. I had been reformatting at a more frequent rate recently due to a hardware issue I was having. And when I have a hardware issue, especially on my own system, I can't stop thinking about. But due to work and classes it took me about a week to diagnose the problem because of my time restraints. Lets just say my grades probably dropped that week :(

But in the end, it turned out to be a bad stick of ram which I returned to Newegg. You gotta love those guys.

And yes, I do actually have ccleaner already in my startup script however, a nice feature of CCleaner is that it integrates into the context menu of your recycle bin if you choose to and instead of frequently emptying the recycle bin I simply run ccleaner in the background to empty it for me.

wtf. people CCleaner does more than just clean your registry. and it does give (usually major) performance increases and fixes many issues on most computers because most people don't know what a registry or temp files are, let alone know how to clean them out

and although most people on neowin know these 5 steps, it's VERY good advice to give your computer illiterate friends / family / boss. they all work (yes smitfraud is a real program) and they all help

  • 2 weeks later...
Wow man. I don't think I'll read one of your posts again. Alot of useless information there I have to say, and TOTALLY NOT Guarnteed to do anything. Nonsense.

Quite frankly if this is your attitude towards someone who is trying to impart some useful knowledge, regardless of how limited it may appear to you, I would suggest that you go someplace else and deliver you ill mannered caustic remarks there! ;)

Good advice... always good to see others who are trying to help others and I am sure that others will agree. Don't let other comments blow the wind out of your sails because of others derogatory comments. I'm sure you meant no malicious intent by wanting to share advice. Keep learning and contributing here and Welcome to Neowin.

Edited by NeoFyLe
And on a side note, if you are using Windows Vista and you've never used the disk defragmenter, then don't touch it. Vista is set to automatically defragment all volumes and it will always find to the time to do so. Either that or you could set up your own custom schedule for Vista to defrag your volumes.

I'm defragmenting it now and will be leaving it on over night so that it doesn't have to 'find the time'. (It's a fairly new system, had it for a few weeks so everything is installed and the temp files are all set up, etc.)

But yeah, I think that Vista seems to run much happier if I leave the temp files alone. I don't really feel that CCleaner is 100% needed on a Vista system. I used it on XP and loved it.

Anyway, welcome to Neowin-try not to feed the trolls now.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Now comes with a money back guarantee instead of a replacement! Hah
    • Rufus 4.15.2391 Beta by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2391 Beta changelog: Improve the guards for using the "silent" option Improve the ability to cancel during write retries Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Media Player Classic - Home Cinema 2.7.3 by Razvan Serea Media Player Classic - Home Cinema (MPC-HC) is a free and open-source video and audio player for Windows. MPC-HC is based on the original Guliverkli project (which is no longer maintained) and contains many additional features and bug fixes. As the continuation of the original Media Player Classic, MPC-HC isn’t flashy but it works with nearly any media format. MPC-HC uses DXVA technology to pass decoding operations to your modern video card, enhancing your viewing experience. And MPC-HC supports both physical and software DVDs with menus, chapter navigation, and subtitles. Overview of features A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about: Dark interface Menu > View > Dark Theme When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons. Options > Advanced Video preview on the seekbar Options > Tweaks > Show preview on seek bar Adjust playback speed Menu > Play > Playback rate The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%): Options > Playback > Speed step Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction. Options > Playback > Output > Audio Renderer MPC-HC can remember playback position, so you can resume from that point later Options > Player > History You can quickly seek through a video with Ctrl + Mouse Scrollwheel. You can jump to next/previous file in a folder by pressing PageUp/PageDown. You can perform automatic actions at end of file. For example to go to next file or close player. Options > Playback > After Playback (permanent setting) Menu > Play > After Playback (for current file only) A-B repeat - You can loop a segment of a video. Press [ and ] to set start and stop markers. You can rotate/flip/mirror/stretch/zoom the video Menu > View > Pan&Scan This is also easily done with hotkeys (see below). There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well. Options > Player > Keys Tip: there is a search box above the table. You can stream videos directly from Youtube and many other video websites You can stream videos directly from Youtube and many other video websites Put yt-dlp.exe or youtube-dl.exe in the MPC-HC installation folder. Then you can open website URLs in the player: Menu > File > Open File/URL You can even download those videos: Menu > File > Save a copy Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder. Several YDL configuration options are found here: Options > Advanced This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder. Play HDR video This requires using madVR or MPC Video Renderer. After installation these renderers can be selected here: Options > Playback > Output Ability to search for and download subtitles, either automatically or manually (press D): Options > Subtitles > Misc Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc. Media Player Classic - Home Cinema 2.7.3 changelog: Updated LAV Filters to version 0.82 Updated MPC Video Renderer to version 0.10.4.2550 Updated MPC Audio Renderer A few crash fixes, bug fixes and small improvements. Download: MPC-HC 2.7.3 (x64) | Standalone | ~20.0 MB (Open Source) Download: MPC-HC 2.7.3 (x86) | Standalone Links: MPC-HC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft will finally let you sign in to Edge with a Google account by Usama Jawad As things currently stand, Microsoft Edge only allows you to sign in to the browser with a Microsoft Account (MSA). This allows you to sync your browser settings and other data across other devices, as long as you sign in with the same account. However, Microsoft is now modifying this mechanism in a way that will likely please many users. In an update to its Microsoft 365 Roadmap, Microsoft has indicated that it will soon let users sign into Edge using a Google account from the profile menu and the Edge sign-in screen. This will be in addition to the MSA login option, and it opens up new doors for people who prefer using Edge, but cannot be bothered to configure a Microsoft account. This brings several advantages such as the ability to sync your data across devices using just a Google account. It may even facilitate flexible single sign-on (SSO) experiences where you can quickly login to websites and services through a single Google account that is presented as the preferred sign-in option. Up until now, Microsoft allowed customers to indirectly use a Google account, by configuring a Google account as a Microsoft account, or by setting up a one-way sync option between Edge and Chrome. This is a rather interesting development, especially considering that Google Chrome still limits you to a Google account sign-in, but it will be interesting to see if the company reciprocates Microsoft's gesture in the future. This is not the only recent instance in which Microsoft has extended a handshake to Google via Edge. In April 2026, it began tracking the development of a work search banner for Google Search queries, just like the one present in Edge. However, if we go back almost seven years, to January 2020, Microsoft had emphasized that it had no plans to "integrate Google services into Microsoft Edge by default", in response to people requesting Google sign-in services on Edge. Fast-forward to today, and Microsoft is planning to release this feature in July 2026, with IT admins having the option to control its availability on Windows and macOS through the NonMicrosoftAccountSignInEnabled policy.
    • If they ever come out and say the AI is no longer accessible to the gen pop people aren't going to know how to tie their own shoelaces.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      89
    4. 4
      Steven P.
      76
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!