#5 Guaranteed Steps to keep your PC running fast...


Recommended Posts

I have been working in an IT environment since high school and so I have learned a few tricks. Below are steps that if you follow and maintain them your PC is guaranteed to stay at tip top shape and will never slow down. I never leave the house without the following small applications on my flash drive. All of the applications below work on all OS versions including Vista x64.

#1 - Download and run CCleaner from http://www.filehippo.com/download_ccleaner/. This small (2.61MB) freeware application works wonders. I run it multiple times per day, but that is just because I am obssesive. If ran once a week, you would be fine. After downloading and installing there are two things you will want to do. First, run the cleaner and second, scan for issues in the registry. Depending on how old your computer is and the amount of time since you have cleaned it up, CCleaner might take up to 20 minutes to finish. Normal scan and clean is around 30 seconds if preformed regularly. I have seen this little application remove up to 20GB, yes 20GB!!, which is just absolutely amazing.

#2 - Second, download this small (0.98MB) free application SmitFraud Fix from here http://siri.urz.free.fr/Fix/SmitfraudFix.exe. This program runs directly from the .exe and starts in DOS. Once running, select #2 for clean (safe mode). It will shut down all of the unneeded processes including the explorer. Also, a little weird thing is that it removes your wallpaper. Other than that, wait for it to scan and then select ?Y? to clean the registry. After that your explorer will start back up and you can close SmitFraudFix. This tool has worked wonders for me. This is mainly used to remove any unwanted spyware. I have thrown Spysweeper, Spybot, etc. at certain spyware and this is the only tool that always works.

#3 - A classic and yet still useful tool. Go to your start menu, applications, system tools, and run the disk defragmenter.

#4 - Right click on ?My Computer? icon and click the advanced tab. Go to the performance options ?settings? tab and unselect every option except for the last two. These last two are the only two that you will notice and so you will want to leave them on.

#5 - And of course, your startup items. Clearing out the startup folder in your "Program Files" is a definite must. More advance users probably can take advantage of msconfig.

If you run through these 5 steps, and keep repeating steps #1-3 at least once a week, your PC will keep running at its finest, I promise you.

No offense, but I've been a member of this forum since you've been in 7th grade... and I can tell you 98% of the people here know this. Hell if im not mistaken, I remember seeing a post from one of the creators of CCLEANER.

As for smitfraud, It is good for certain things, and only those things. It removes rogue AntiSpyware programs. You know, the fake Anti-Spyware software that tells you, you NEED it to remove threats, all the while its downloading trojans on your computer. As for removing run of the mill spyware, it ignores it.... use Spy Sweeper. 9 of 10 things that require smitfraud come from porn sites, so if you need it.... be ashamed :)

My system seems to run faster after I quit using CCleaner. I don't know about smitfraud, and I don't think you really need to uncheck all of those items in the performance tab unless your computer is really slow, but the rest is good.

No offense, but I've been a member of this forum since you've been in 7th grade... and I can tell you 98% of the people here know this.

You're correct about most of the users on Neowin knowing about this, but really, cut Brian some slack here, He's just trying to pass along what he thinks is some useful info....

Oh and BTW .. Ive been involved in the IT profession since before you were BORN :p

I'd be suspicious about the 2nd executable, but CCleaner is good. If you feel your PC is running slower then you might be deleting prefetch data (make sure it's unchecked) or running it too often.

its fine, its really meant to be a virus removal tool

Yes, SmitFraudFix will be detected by some software as spyware or a virus however, these are false reports. The reason they consider it a virus is because because "process.exe is detected by some antivirus programs (AntiVir, Dr.Web, Kaspersky) as a "RiskTool". It is not a virus, but a program used to stop system processes. Antivirus programs cannot distinguish between "good" and "malicious" use of such programs, therefore they may alert the user."

You can actually read more about how SmitFraudFix works here http://www.beyondlogic.org/consulting/proc...processutil.htm

And I agree with you JaMDKinG :) I reformat so often that I hardly use any of my own procedures I just wrote about. Reformatting can be very addicting. But they come in handy for the average user who only reformats every year or two.

Why would you run ccleaner two or three times a day? Just have it clean automatically at startup and you won't have to deal with having to starting it up manually. Create a shortcut on your desktop and for the location, enter:

"C:\Program Files\CCleaner\CCleaner.exe" /AUTO

Place this shortcut in your startup folder, and your computer will be clean with every startup.

And on a side note, if you are using Windows Vista and you've never used the disk defragmenter, then don't touch it. Vista is set to automatically defragment all volumes and it will always find to the time to do so. Either that or you could set up your own custom schedule for Vista to defrag your volumes.

Edited by Ruiz

The answers to your questions. I had been reformatting at a more frequent rate recently due to a hardware issue I was having. And when I have a hardware issue, especially on my own system, I can't stop thinking about. But due to work and classes it took me about a week to diagnose the problem because of my time restraints. Lets just say my grades probably dropped that week :(

But in the end, it turned out to be a bad stick of ram which I returned to Newegg. You gotta love those guys.

And yes, I do actually have ccleaner already in my startup script however, a nice feature of CCleaner is that it integrates into the context menu of your recycle bin if you choose to and instead of frequently emptying the recycle bin I simply run ccleaner in the background to empty it for me.

wtf. people CCleaner does more than just clean your registry. and it does give (usually major) performance increases and fixes many issues on most computers because most people don't know what a registry or temp files are, let alone know how to clean them out

and although most people on neowin know these 5 steps, it's VERY good advice to give your computer illiterate friends / family / boss. they all work (yes smitfraud is a real program) and they all help

  • 2 weeks later...
Wow man. I don't think I'll read one of your posts again. Alot of useless information there I have to say, and TOTALLY NOT Guarnteed to do anything. Nonsense.

Quite frankly if this is your attitude towards someone who is trying to impart some useful knowledge, regardless of how limited it may appear to you, I would suggest that you go someplace else and deliver you ill mannered caustic remarks there! ;)

Good advice... always good to see others who are trying to help others and I am sure that others will agree. Don't let other comments blow the wind out of your sails because of others derogatory comments. I'm sure you meant no malicious intent by wanting to share advice. Keep learning and contributing here and Welcome to Neowin.

Edited by NeoFyLe
And on a side note, if you are using Windows Vista and you've never used the disk defragmenter, then don't touch it. Vista is set to automatically defragment all volumes and it will always find to the time to do so. Either that or you could set up your own custom schedule for Vista to defrag your volumes.

I'm defragmenting it now and will be leaving it on over night so that it doesn't have to 'find the time'. (It's a fairly new system, had it for a few weeks so everything is installed and the temp files are all set up, etc.)

But yeah, I think that Vista seems to run much happier if I leave the temp files alone. I don't really feel that CCleaner is 100% needed on a Vista system. I used it on XP and loved it.

Anyway, welcome to Neowin-try not to feed the trolls now.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft fixes one of Excel Copilot's most frustrating limitations by Usama Jawad Microsoft began integrating Copilot into Excel a couple of years ago and has been upgrading it with new functionalities since then. While some changes have been controversial, Microsoft is hoping to win over users by allowing them to be more productive via Copilot. To that end, it has now announced a Copilot improvement that may actually be appreciated by people who use it regularly. Excel customers often use the Copilot prompt box to issue instructions to format and customize their data, but it can become quite tiring to keep repeating the same instructions again and again. Microsoft now allows you to define Copilot personalization rules for formatting, naming conventions, formulas, and report styles. These can be accessed via Settings > Personalization, where you can explain your rules in natural language like "Always format currency in USD with no decimals", and just let Copilot take care of the rest. Microsoft is going a step further in this direction by allowing you to set workbook rules too. These rules are stored as a .Rules sheet, and are preserved while the workbook is shared. This fosters collaboration while making sure that standard rules govern the Copilot editing experience across the organization. Other advantages of this capability include pointing it to specific examples, defining dynamic formulas, and referencing an entire sheet and asking Copilot to infer rules based on that. You can leverage this feature by opening Copilot in Excel, clicking on "+", and selecting Create workbook rules. If you have an existing .Rules sheet, you can simply start listing the rules in column A as well. Personalization features are available to all Copilot in Excel users across the web, Mac, and Windows. Meanwhile, workbook rules are currently being previewed for Windows and Mac customers on the Insiders channel. General availability is scheduled after a few weeks, but a concrete date is currently unknown. Overall, the Excel capability is quite similar to ChatGPT's memory features, which allow you to permanently store items in the AI model's context window.
    • Imagine you still haven't discovered Total Commander that is doing all those things for three decades already...
    • This sounds like underneath the nice marketing spin, either someone at Adobe got tired of their lazy devs and asked Microsoft to help them sort at least some of Adobe's ancestral spaghetti code to make it go faster, or Microsoft wanted Adobe's crap to run better on Windows to make it look better when compared to Apple, so they offered to intervene. Either way, GOOD.
    • My favorite file manager for Windows 11 finally gets a long-requested feature by Taras Buria Files is among the best File Explorer alternatives for Windows 10 and 11. This free app is packed with all sorts of features and conveniences, but there is one crucial feature that is still missing—Tree View. Fortunately, the latest update in the Preview channel finally delivers it. With version 4.1.4, which is now available for download in the Preview channel, developers implemented Tree View, a new mode that displays folders in an expandable hierarchy. Windows 11's stock File Explorer always had this feature, but it was nowhere to be found in Files until now. Starting with the latest preview update, you can expand each drive and its nested folders without leaving the current location and then open the folder you need in the main view. To try Tree View in Files, update the app to the latest preview version, then click the small arrow next to a drive to expand its content. The developers say they are rolling out Tree View in Preview first to gather feedback from users and improve the feature before bringing it to all in the stable channel. In addition to Tree View, Files 4.1.14 improves the Windows Fonts folder. You can now preview each font directly in Files with no need to open the built-in font viewer. For now, these two features are only available in the Preview channel. For those using the stable release, developers recently released version 4.1.3, with improvements for the built-in tag system, on-demand folder size calculation, and plenty of various fixes. You can check out the full release notes here. You can download Files from the Microsoft Store (paid version) or its official website (free).
    • Who is paying for this 30x scale-up? Its sounds expensive.
  • Recent Achievements

    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      519
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      81
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!