Optimization Guides


Recommended Posts

I just wrote a few guides on optimizing XP, Optimizing Vista and Optimizing your internet connection...You can get them view them at the links below...no need to download

http://karma--police.deviantart.com/art/Op...-Vista-80308963

http://karma--police.deviantart.com/art/Optimize-XP-79687970

http://karma--police.deviantart.com/art/Op...-Speed-78189274

Thanks

Link to comment
https://www.neowin.net/forum/topic/626482-optimization-guides/
Share on other sites

This does not compute:

Right click your drive with windows vista on it. Right click it properties and untick index files for faster files searching.

Indexing is for speeding up file searches. Turning it off will slow your searches.

*****

Ignore that, I see you werent saying speed up your searches by unticking file indexing, you were saying speed you system up by unticking it. Saturday morning pre-coffee, brain not on yet.

This does not compute:

Right click your drive with windows vista on it. Right click it properties and untick index files for faster files searching.

Indexing is for speeding up file searches. Turning it off will slow your searches.

Ya, but what's more important, faster overall speed (and more drive space) during normal operation or faster searches? Personally, I run searches once every blue moon, so I've been doing this step since XP.

Ya, but what's more important, faster overall speed (and more drive space) during normal operation or faster searches? Personally, I run searches once every blue moon, so I've been doing this step since XP.

And people that do run searches will be slowed down.

Also, once the indexing has occured and completed, you won't see performance hits.

As far as disk space. You can get a 500gig HD for under $100. Crying about the minuscule amount of space that the indexing service uses is just dumb.

Ya, but what's more important, faster overall speed (and more drive space) during normal operation or faster searches? Personally, I run searches once every blue moon, so I've been doing this step since XP.

the indexer only uses noticeable resources when it's building the database, after that it doesn't dent your performance, and makes your searches much faster. Considering that every time you type something in the start menu it's using the index, it really does improve your system's performance (saving you time, increasing efficiency).

And people that do run searches will be slowed down.

Also, once the indexing has occured and completed, you won't see performance hits.

As far as disk space. You can get a 500gig HD for under $100. Crying about the minuscule amount of space that the indexing service uses is just dumb.

It indexes after every restart so it is not dumb. It is not the amount of hard drive or storage space it takes , it is the amount of memory it uses to run the service.

http://karma--police.deviantart.com/art/Xp...zer-V2-81595279

Second version of the guide....i was saying turn off the indexing service because it uses a process which uses up resources..If you search alot then by all means dont tick it....The second version has more tweaks etc and is better layed out

It indexes after every restart so it is not dumb. It is not the amount of hard drive or storage space it takes , it is the amount of memory it uses to run the service.

It only re indexes the drive if you delete the index. It does not re-index each reboot.

Disabling the indexing service (which is the only way to gain enough performance to make this worth while) only saves you maybe 20MB of RAM. That's pretty much the only thing you gain from disabling it.

Indexing is good, and i never EVER noticed a performance decreasing while my pc has been indexing, maybe thats just because i am on a quad pc.

The indexing service will stop the indexing process (if it is in progress) if you so much as move the mouse, so even on an old machine, you wouldn't notice the service indexing the drive.

It only re indexes the drive if you delete the index. It does not re-index each reboot.

Disabling the indexing service (which is the only way to gain enough performance to make this worth while) only saves you maybe 20MB of RAM. That's pretty much the only thing you gain from disabling it.

The indexing service will stop the indexing process (if it is in progress) if you so much as move the mouse, so even on an old machine, you wouldn't notice the service indexing the drive.

There are hundreds of sources that tell you to disable this service. I spend <2 minutes a month searching for files on my PC. I am somewhat organized so I know where I put the ones I need. But you don't have to take my word for it just Google Indexing Service and look at the results. Here is one from an MS MVP Click here .

There are hundreds of sources that tell you to disable this service.

There are hundreds of stories about knights fighting dragons. Doesn't mean they are true!

XP and Vista (to a greater extent) were built to use the Indexing service (in different ways on different platforms). Sorry but to me, turning it off seems pointless. Once an index is built - maintaining it takes little resources.

And I am very anal in how I organise my files, I stick to the same conventions all the time. And yet Indexing still helps me greatly.

There are hundreds of stories about knights fighting dragons. Doesn't mean they are true!

XP and Vista (to a greater extent) were built to use the Indexing service (in different ways on different platforms). Sorry but to me, turning it off seems pointless. Once an index is built - maintaining it takes little resources.

And I am very anal in how I organise my files, I stick to the same conventions all the time. And yet Indexing still helps me greatly.

If you perform a great deal of file searching then by all means keep it. To each his/her own. Sorry but I will take the word of a MS MVP. This subject can get as long as the UAC thread. :)

Ditto. I tend to delete a lot when I don't find a need for a game or some program that I won't use anymore.

I keep my files organized to the T and generally can click on my User folder and then Downloads or Documents within seconds...rather than opening the taskbar, hitting search, etc.

Everyone's habits are different, some prefer to use Search because its just how they were used to using computers and some have never touched it in months or even years.

Not putting a downer on this, but some of the info in it (XP optimization version 2) may not be applicable, or just plain wrong.

The Services - Black Viper's site is indeed the best resource to find out what you do and don't need; but to wildly claim you can use either Safe or Power User is misleading. You should rather invest the time investigating what the services do; and then work out if you need the functionality they drive. Point in case is things like File and Printer sharing - if you don't run a "TRUE" home network, likely you have a printer attached to a single machine and have other boxes printing to it. Without this service, you would only be able to print to the local machine attached printers; again depends on your setup and what you need it to do.

Boosting SATA drives - very dependent on hardware. I've a Gigabyte X38 Mobo, and with the Intel SATA drivers, the "Enable write caching to disk" option is unticked and GRAYED OUT. It doesn't mean the write caching is disabled though (after much searching!) - just that the default Windows caching is overriden and handled by the SATA native driver.

Hibernation - useful, but this is usually unticked for desktop computers. It is only enabled by default on laptops (because they have specific power saving facilities in the processor which indicate to Windows that hibernation is a "good" thing)

Paging file - the worst option. This figure has been kicking around since the days of Windows 95 (and probably before on Win 3.1). A paging file will be used when the available physical RAM has been expended, and you are running lots of tasks/processes. It doesn't make sense to increase the size of the paging file as you increase the available RAM; indeed it is better to decrease it.

With systems with 2 Gb of RAM, you should be able to operate with a page file of 1 Gb or less. With 4 Gb RAM, you shouldn't need one at all - HOWEVER, note some applications will require the presence of the paging file regardless of the available RAM; you should be able to get away with a 512Mb file. For systems with LESS RAM you want MORE paging file, as it is more likely Windows will have to page applications from memory to disk when multi-tasking.

Better to locate the paging file on a secondary device away from the System (OS) device. For IDE devices it was recommended to put on the secondary channel; however SATA interface negates that and it is sufficient to locate just on a seperate HDD.

That is all.

Baloo

You know MVP isn't really the most amazingly qualified person ever. Why not take the word of the windows developers? The ones who leave it ON as default.

that'd make way too much sense when you could instead listen to someone who thinks he's improtant and wants recognition by becomign an improtant internet person with his mvp :p

I don't search a lot but I definately don't turn it off, makes no sense as real time indexing after it makes the initial indexing has virtually no overhead, and it's worth it just for searhing the start menu, or quickly getting to control panel items and whatnot.

I always disabled Indexing Service on XP but the Vista Indexing is amazing.

Ccleaner is good at removing stuff from your hard disk, but there are better. Glary's is far better.

Ccleaner is no good at cleaning the registry. Glary's and registry cleaner expert are far better.

Ccleaner is free though and the others I mentioned are not free.

As for the rest of the info, thanks for sharing but I dont thing many will do it. Especially with Vista. Why disable the graphics functions, thats what one of the main attractions are in Vista.

Thanks for sharing anyway. well done.

If services had to be on in XP, then Server 2003 would make no sense, since it ships with a buttload of services off by default.

That said, most people are going to be best off not messing with the out-of-box defaults, because they don't know what can and can't be turned off, and will ultimately create more headaches than they save.

But if you want to tinker, pick a guide (I use blackviper's) and go for it. Just be prepared for potential bizarre consequences.

And the Indexing Service should almost always be turned off. There's a reason they completely overhauled it for Vista: it sucks. :p

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.3 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.3 changelog: Fixes issues with MP4 files with more than 8 channels Fixes incorrect VBR detection for some CBR MP3 files Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      74
  • Tell a friend

    Love Neowin? Tell a friend!