Recommended Posts

So i have been looking around for a descent dreamscene video for my new 24" 1920x1200 setup and ran across the crysis dreamscene waterfall over at wincustomize Link. That video is pretty awesome in its own right but it was only recorded at 1280x800. im looking for a version that is 1080p wmv to use as a dreamscene. now what i do know is that it would take a gaming rig made od $$$ to make a video like this but i do know that there is hardware out there that can pull this off. If someone knows of a link to a 1080p version or a 1920x1200 version or if someone could make a video like this that would be awesome. Please post if you can help out!

Link to comment
https://www.neowin.net/forum/topic/627800-crysis-1080p-waterfall-video/
Share on other sites

Aparently the guy who made that video says:

All recording programs suck, I used the built in recording console commands, so even though the game rendered at 4 FPS realtime, I got a 30 FPS video.

capture_frames 1

sys_physics_CPU 0

fixed_time_step 0.033333

It sounds like you could make your own video at that resolution.

So i have been looking around for a descent dreamscene video for my new 24" 1920x1200 setup and ran across the crysis dreamscene waterfall over at wincustomize Link. That video is pretty awesome in its own right but it was only recorded at 1280x800. im looking for a version that is 1080p wmv to use as a dreamscene. now what i do know is that it would take a gaming rig made od $$$ to make a video like this but i do know that there is hardware out there that can pull this off. If someone knows of a link to a 1080p version or a 1920x1200 version or if someone could make a video like this that would be awesome. Please post if you can help out!

i was reading somewheres about being able to render videos in sandbox using frame by frame which sounds like it would be more feasable because of the computational power it would take to encode a 1080p plus running crysis at the resolution is a feat in itself. The only consumer rig out there that could even come close to doing it in realtime do it that i imagine would be a skulltraill rig, dual xenons or q's with dual nvidia 9800x2's. even then it might be iffy. we all know that crytek and ea have the hardware to accomplish a feat like this but of course they would never honor a request like that. if anyone could shed some light on the rendering in sanbox that would be awesome

here Digg they talk about how these high res images are rendered one frame at a time and have achieved a ridicously high rez. so say we wanted to make a 30second video. for video to look good we would need it at 30 fps video. so 30x30 is 900 frames if my math is correct. so if we rendered the scene in sandbox frame by frame and output those to images. then combine the images into video and then envode that in the format shouldnt that work? or is my logic all fooked up

high rez render examples here Link

Edited by Crysis Addict
Skulltrail? Overkill.

The only thing holding the cheapest c2d from doing this is a good gpu. Graphics is where Crysis excels. No game requires more 2 cores to be maxed out at even the relatively small 1080p res.

yea but were talking about real time encoding of hd video also...add this to playing crysis at the same time and u need some serious hardware dont you think

I'd imagine the built in record command would make it less so. And I still think a C2D can do it, also given the fact, that it'll record properly, not necessarily play properly. Which is not a big setback.

from the digg article though the guys says that he couldnt get descent framerates from the built in capture and we all know hows fraps kills framerates. thats why i think the sandbox frame render would be a better solution.

VirtualDub is nice, It will load normal images or videos, and can load .wav files as audio tracks (and export using lots of different codecs and such)

I've been exporting my stuff as DivX with MP3 audio, But I want to move over to H.264 and AAC (I've already got all the stuff to do that, I just haven't bothered doing it yet)

VirtualDub is nice, It will load normal images or videos, and can load .wav files as audio tracks (and export using lots of different codecs and such)

I've been exporting my stuff as DivX with MP3 audio, But I want to move over to H.264 and AAC (I've already got all the stuff to do that, I just haven't bothered doing it yet)

so if im gonna be dealing with 1080p stuff here what which would you recommend. im not going to be doing audio so that wont be a issue. and which compression method (divx hd, or h.264 is gonna give me the best compression to quality ratio??

another ? i am wondering is which video format can say a 8800gt decode on the gpu, instead of the cpu, using the purevideo tech

thanks,

loop

Edited by Crysis Addict

From the looks of it, It will decode both formats on hardware (Would make sense since i see barely any CPU usage on 720p video, regardless of the codec)

Both formats are MPEG4, DivX being a "simpler" profile and H.264 being a more advanced profile, both provide really good quality, but H.264 can provide better quality at a similar bitrate as DivX, with a increase in decoding "costs" (time spent decoding each frame). Input source also matters, the higher quality of the source, the larger the file size will be (hence why you can fit a MPEG2 DVD onto a 700MB CD using DivX, because it's re-compressing a compressed source)

So if Crysis is outputting uncompressed frames (i assume it would, an older engine like Source will output TGA images of each frame), and you're keeping it at full res (1080p) and you have the hardware to decode it (so CPU usage doesn't metter), Then i'd go with H.264, best quality/space/speed

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Mp3tag 3.35 by Razvan Serea Mp3tag is a powerful and yet easy-to-use tool to edit metadata (ID3, Vorbis Comments and APE) of common audio formats. It can rename files based on the tag information, replace characters or words from tags and filenames, import/export tag information, create playlists and more. The program supports online freedb database lookups for selected files, allowing you to automatically gather proper tag information for select files or CDs. Mp3tag supports the following audio formats: Advanced Audio Coding (aac) Free Lossless Audio Codec (flac) Monkeys Audio (ape) Mpeg Layer 3 (mp3) MPEG-4 (mp4 / m4a / m4b / iTunes compatible) Musepack (mpc) Ogg Vorbis (ogg) OptimFROG (ofr) OptimFROG DualStream (ofs) Speex (spx) Toms Audio Kompressor (tak) True Audio (tta) Windows Media Audio (wma) WavPack (wv) Mp3tag 3.35 changelog: This version introduces a new Files options page, enhanced toolbar customization, support for RF64 WAV files, improved Discogs and MusicBrainz tag sources, and many other improvements and fixes. See the Release Notes for more details. Download: Mp3tag 64-bit | 5.7 MB (Freeware) Download: Mp3tag 32-bit | 5.2 MB Link: Mp3tag Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • The FIFA World Cup is not US centric.
    • It’s amusing how Microsoft is pushing IT admins as if this was a major, game-changing update. In reality, it’s just an enablement package that bumps the build number, which is disappointing compared to the more substantial 22H2 and 24H2 releases. Technically, 25H2, 26H1, and the upcoming 26H2 are essentially the same, differing only in support schedules. They could have included the Windows K2 improvements here, but chose not to. The era of Windows being in the backburner continues, and this 26H2 release feels like an afterthought. Shame, Nadella, shame.
    • Microsoft, totally not confusing /s 25H2 - Current for non-Arm based Windows 26H1 - Current for Arm based Windows 26H2 - Only for non Arm Windows
    • After I installed those, my older but capable Win 11 laptop (16GB RAM) reported it as 26H2 26300.8697. Then I installed it on my big laptop (128GB RAM! Hehe sorry), it reported it as 25H2 26220.8690. Ugh. Do I have to switch Insiders channels from Release to Beta?
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      78
    4. 4
      Steven P.
      72
    5. 5
      Michael Scrip
      71
  • Tell a friend

    Love Neowin? Tell a friend!