• 0

nVidia Control Panel - Video Card Fans


Question

I'm not sure if this is considered to be a software or hardware or PC modding issue at the moment. I think it is the nVidia Control Panel...

Here's the story...I have the PC as listed in my signature. I use the absolute latest stable drivers available from nVidia. I'm not too big on how much noise my PC makes - all I care about is framerates! - so I want to kick my two video card fans to 80% while gaming. The control panel says you do this by using a nice profile which loads certain pre-set settings when certain things occur - like launching a specific application. However, this did not work in the least bit. Then I tried to just have the fans at 80% all the time. But the fans resort to what seems to be defaults randomly. Sometimes I can close the control panel and the fans stay at 80% for a few seconds other times they slow down right when I close the control panel. I've also tried leaving the panel open and playing my game, but the fans still slow down. The most annoying thing to me is when things don't work how they are suppose to. Hope you guys have some insite.

EDIT: Oh yeah and I have also tried the latest Beta drivers...

Link to comment
https://www.neowin.net/forum/topic/631884-nvidia-control-panel-video-card-fans/
Share on other sites

12 answers to this question

Recommended Posts

  • 0

Now that you bring it up, I remember reading about RivaTuner before. I'll give it a try when I'm home in a bit. However, I would very much prefer if the control panel could be fixed or maybe I'm not doing it right...I don't like installing applications and utilities that do what I could normally do without them, even if it is a bit more work.

  • 0
I tried using nTune, but it would not load the profile I had setup. Whenever I rebooted, I had to go back and set my fan speed again.

EXACTLY, I forgot to mention that I installed nTune too. Except I had no luck at all with it...wouldn't load the profile...ever. Also, I'm wondering what OS you have installed.

  • 0

I have a similar problem with ntune in vista when I try to OC, I can OC, save the profile, set the custom rules so it is st to start up when windows boots, but when I reboot it goes back to stock and I have to manually load the profile, VERY annoying. And rivatuner is even more annoying because it prompts for UAC at boot.

  • 0
I have a similar problem with ntune in vista when I try to OC, I can OC, save the profile, set the custom rules so it is st to start up when windows boots, but when I reboot it goes back to stock and I have to manually load the profile, VERY annoying. And rivatuner is even more annoying because it prompts for UAC at boot.

I noticed that too, there has to be some way to make it just run without the prompt.

  • 0
I noticed that too, there has to be some way to make it just run without the prompt.

Well I have my UAC set to automatically accept the UAC prompts. This is something new I set as of yesterday, so I'm going to see if works out.

Here's a link of where I found it:

http://www.informationweek.com/blog/main/a...shut_off_v.html

  • 0
Well I have my UAC set to automatically accept the UAC prompts. This is something new I set as of yesterday, so I'm going to see if works out.

Here's a link of where I found it:

http://www.informationweek.com/blog/main/a...shut_off_v.html

I just booted to Vista, and had a reg file I got from BrandonLive that fixed the prompts.

  • 0

Well this is intriguing i guess...RivaTuner is doing the same thing. It look like you can set fan speeds directly on the video cards and also through the forceware drivers. Changing the speeds both ways still results in the fans going back to lower speeds.

EDIT: If I reboot, RivaTuner does apply the fan settings every time, but they go back to defaults after about 20 seconds. I guess this is less random than using nTune.

Edited by lord_xenos
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • They thought value of their goods would forever only drop like it used to and didn't account for sudden increase in price because of all the Ai hype. Tough luck Samsung, don't try to weasel this one out. Also American customer protection laws are a**. In Europe, you need to be compensated for a functioning product of same or better characteristics (not same price point as when it was originally bought!) if it can't be repaired and when you receive a replacement product your warranty starts from scratch because you received a different item than you previously had and old warranty thus cannot apply to it anymore. If your actual item was successfully repaired, warranty gets extended for the period the item was in service. If item is repaired to a significant extent, warranty also starts over from scratch because major part of it was replaced. Americans need to fight to get this kind of consumer protections because they are constantly getting screwed over.
    • Microsoft releases new Windows 11 Media Creation Tool with the latest updates by Taras Buria Patch Tuesday updates arrive every month, bringing users new features and security updates. To make sure customers have access to the most recent images, Microsoft also releases updates to the Media Creation Tool app, its official utility for Windows 11 installation. Today, the company pushed new ISOs to Media Creation Tool, allowing you to create images with the June 2026 Patch Tuesday updates. With the latest update, the Media Creation Tool now downloads KB5094126. It is Windows 11 version 25H2, build 26200.8655, which is also available via Windows Update. Note that the app itself remains on the previous version, which you can check in Properties > Details. The only change is that it now downloads a more recent Windows 11 build, so the only way to check is to download an ISO. The June 2026 Patch Tuesday update is a special release for Windows 11, as it brings a new performance profile to make the operating system more responsive and snappier when rendering various user interface surfaces, including the Start menu, quick settings, and more. It does so by spiking processor speeds for a brief moment, resulting in higher loads for a second or two. The so-called “Low latency profile” is rolling out gradually, but you can force-enable it with the ViVeTool app. Other changes include webcam improvements, Task Manager updates, shared audio support, and more. You can download the Media Creation Tool app from the official Microsoft website using this link. Besides MCT, Microsoft lets you download Windows 11 ISO as a file directly from the official Windows 11 website. However, you will need a third-party app to write it to your USB drive. Check out this guide if you want to know how to do that.
    • Louis Rossmann suing Samsung over "990 Pro SSD warranty scam" by Sayan Sen Back in 2023, if you recall, Neowin reviewer Robbie Khan had a dispute with Samsung over his 990 Pro SSD, which was rapidly losing its health. After significant back and forth, the tech giant had finally released firmware to "stop" the issue. Interestingly, its previous flagship at the time, the 980 Pro was also facing problems leading to two consecutive sets of firmware fixes. Three years later, it looks like a similar conflict has now broken out between tech repair entrepreneur YouTuber Louis Rossmann and Samsung, as it has escalated into a threatened lawsuit after the company allegedly refused to appropriately replace a failing 990 Pro SSD that remained under warranty. According to Rossmann, a 4TB Samsung 990 Pro NVMe SSD purchased for approximately $330 less than two years ago, began experiencing major hiccups and issues, even though he claims it had been operated under ideal cooling conditions. It was installed in a RAID 1 array and cooled by a heatsink and dual high-speed fans. However the drive reportedly started dropping out of the array, exhibiting controller-level failures that eventually became not useable in any meaningful way. Rossmann said Samsung’s support process was marked by delays and confusion from the very start. After initially contacting the wrong regional support channel, he was redirected to Samsung’s memory support division where he submitted detailed diagnostics, logs, and proof of purchase. Rossmann runs a repair company and owns an ACE Lab PC-3000 machine, which is a professional-grade data recovery equipment. As such, he had been confident in his diagnostics. Samsung even seemingly acknowledged that later. Regardless, Rossmann claims that his initial support ticket was automatically closed before a full 24-hour response window had elapsed, forcing him to reopen the case and resubmit documentation. The controversy however intensified further from here after Samsung accepted the drive for warranty evaluation but later returned it with a repair report stating that the drive had passed its testing and that the SSD had been verified as functional. Rossmann strongly disputed those claims citing that his own independent testing on PC-3000 showed write speeds reducing to as low as 40–60 MB/s before the drive failed entirely. Samsung subsequently informed him that the SSD had been reset and reflashed, passing internal stress tests. However, the company also stated that replacement units were unavailable due to an industry-wide memory shortage and suggested that a refund process could be initiated if further testing confirmed the fault. Thus, to settle, the company offered a refund of $330, the amount that was initially paid by him to make the purchase. Here, Rossmann pointed out the seeming hypocrisy of the tech giant as in how no Samsung drive was apparently allocated for warranty replacements, but they were abundantly available for retail sales especially when using business accounts. As you can see, Rossmann is indeed right, there are Samsung 990 Pro 4TB SSDs on Amazon currently for $950 (shipped and sold by first-party Amazon US itself), and they are also available on Samsung's own store too, albeit for an even higher price of $1100. Thus Rossmann argues that Samsung’s inability or unwillingness to provide a replacement while the same model remains available for purchase at significantly higher market prices reflects a failure to honor its warranty obligations. He has issued a formal 60-day notice and says he intends to file suit in Texas small claims court, asserting that companies should face greater costs for denying legitimate warranty claims than for fulfilling them. You can check out the full video titled "Samsung's 990 Pro SSD warranty policy is a scam; I'm taking them to court," at the link below. Source and image: Louis Rossmann (YouTube) As an Amazon Associate we earn from qualifying purchases
    • Was it too much to ask to show the icon in this article?
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      185
    3. 3
      +Edouard
      158
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!