• 0

nVidia Control Panel - Video Card Fans

Asked by ANON86364,

 Share

Question

Grand Master

ANON86364

Posted
Posted

I'm not sure if this is considered to be a software or hardware or PC modding issue at the moment. I think it is the nVidia Control Panel...

Here's the story...I have the PC as listed in my signature. I use the absolute latest stable drivers available from nVidia. I'm not too big on how much noise my PC makes - all I care about is framerates! - so I want to kick my two video card fans to 80% while gaming. The control panel says you do this by using a nice profile which loads certain pre-set settings when certain things occur - like launching a specific application. However, this did not work in the least bit. Then I tried to just have the fans at 80% all the time. But the fans resort to what seems to be defaults randomly. Sometimes I can close the control panel and the fans stay at 80% for a few seconds other times they slow down right when I close the control panel. I've also tried leaving the panel open and playing my game, but the fans still slow down. The most annoying thing to me is when things don't work how they are suppose to. Hope you guys have some insite.

EDIT: Oh yeah and I have also tried the latest Beta drivers...

Link to comment
https://www.neowin.net/forum/topic/631884-nvidia-control-panel-video-card-fans/
Share on other sites

12 answers to this question

Recommended Posts

  • 0
Grand Master

ANON86364

Posted
  • Author
Posted

Now that you bring it up, I remember reading about RivaTuner before. I'll give it a try when I'm home in a bit. However, I would very much prefer if the control panel could be fixed or maybe I'm not doing it right...I don't like installing applications and utilities that do what I could normally do without them, even if it is a bit more work.

  • 0
Grand Master

ANON86364

Posted
  • Author
Posted
I tried using nTune, but it would not load the profile I had setup. Whenever I rebooted, I had to go back and set my fan speed again.

EXACTLY, I forgot to mention that I installed nTune too. Except I had no luck at all with it...wouldn't load the profile...ever. Also, I'm wondering what OS you have installed.

  • 0
Grand Master

ViperAFK

Posted
Posted

I have a similar problem with ntune in vista when I try to OC, I can OC, save the profile, set the custom rules so it is st to start up when windows boots, but when I reboot it goes back to stock and I have to manually load the profile, VERY annoying. And rivatuner is even more annoying because it prompts for UAC at boot.

  • 0
Grand Master

CrashG

Posted
Posted
I have a similar problem with ntune in vista when I try to OC, I can OC, save the profile, set the custom rules so it is st to start up when windows boots, but when I reboot it goes back to stock and I have to manually load the profile, VERY annoying. And rivatuner is even more annoying because it prompts for UAC at boot.

I noticed that too, there has to be some way to make it just run without the prompt.

  • 0
Grand Master

ANON86364

Posted
  • Author
Posted
I noticed that too, there has to be some way to make it just run without the prompt.

Well I have my UAC set to automatically accept the UAC prompts. This is something new I set as of yesterday, so I'm going to see if works out.

Here's a link of where I found it:

http://www.informationweek.com/blog/main/a...shut_off_v.html

  • 0
Grand Master

CrashG

Posted
Posted
Well I have my UAC set to automatically accept the UAC prompts. This is something new I set as of yesterday, so I'm going to see if works out.

Here's a link of where I found it:

http://www.informationweek.com/blog/main/a...shut_off_v.html

I just booted to Vista, and had a reg file I got from BrandonLive that fixed the prompts.

  • 0
Grand Master

ANON86364

Posted
  • Author
Posted (edited)

Well this is intriguing i guess...RivaTuner is doing the same thing. It look like you can set fan speeds directly on the video cards and also through the forceware drivers. Changing the speeds both ways still results in the fans going back to lower speeds.

EDIT: If I reboot, RivaTuner does apply the fan settings every time, but they go back to defaults after about 20 seconds. I guess this is less random than using nTune.

Edited by lord_xenos
This topic is now closed to further replies.
 Share
Go to question listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Windows 11's big performance boost is finally available for all

      By Case_f · Posted

      Frankly, I blame whoever is writing such articles. "A big improvement/update and/or new feature is now available to everyone! Also, use some unofficial tweak tool to enable it because it actually isn't available to you yet and might not in fact even be entirely ready or whatever, hence why it is perhaps not enabled for you*. But it's great and you should enable it!" I mean there's nothing wrong with sharing info about some feature you might need to enable via unofficial means, of course. It's just that these articles tend to essentially end up being two news pieces in one, and one of them tends to be a bit misleading. (*Yes, yes, the "it's a controlled rollout!" thing. Not a fan of that one either. The argument, not the actual rollout.)
    • SQL Server Management Studio 22.7 brings "What's New" page, T-SQL formatting, and lots more

      By wrack · Posted

      Thank you. Will do. I read in the release notes that editor config might be at play here.
    • Windows 11's big performance boost is finally available for all

      By eiffel_g · Posted

      Actually, I think even Microsoft doesn't know how to control it
    • OpenAI is making Codex more useful in Chrome and the cloud

      By pradeepviswav · Posted

      OpenAI is making Codex more useful in Chrome and the cloud by Pradeep Viswanathan OpenAI's Codex now has more than 5 million users, up nearly 4x from earlier this year. To further accelerate Codex's growth among developers, OpenAI today announced that it has agreed to acquire Ona, a company that builds secure cloud execution and orchestration technology for developers. Ona will enable developers to run Codex with persistent and controlled cloud infrastructure for long-running agentic workflows. Right now, most Codex execution happens locally on developers' laptops and PCs, and the agents work continuously for hours. Through Ona, OpenAI aims to make Codex agents keep working for days without being tied to a user’s local machine or an active session. This will be an important capability for enterprises that want to deploy AI agents in production while maintaining control over infrastructure, data, security boundaries, credential scope, logging, and review workflows. Like any acquisition, the deal is still subject to customary closing conditions, including regulatory approvals. Until the deal closes, OpenAI and Ona will continue to operate as separate companies. After closing, Ona’s team will join the Codex team to improve developer workflows. Alongside the Ona acquisition announcement, OpenAI today introduced a few Codex updates. Developers can now save Codex rate limit resets and use them later instead of losing them when they are not needed immediately. OpenAI is also adding a referral option where users can invite a friend to Codex and get a saved rate limit reset. OpenAI today also announced a developer mode for browser use in Chrome and the Codex in-app browser. With this mode, Codex can use the Chrome DevTools Protocol to debug web apps, inspect pages, and work more directly with browser-based development workflows. Developers can use this when they want Codex to profile JavaScript, inspect console output and network traffic, examine web page states including the DOM and applied styles, and more.
    • Camtasia 2026.1.3

      By Copernic · Posted

      Camtasia 2026.1.3 by Razvan Serea TechSmith Camtasia is the complete professional solution for high-quality screen recording, video editing and sharing. Camtasia 2026 makes editing your videos easier, and faster than ever. The new editor is packed with enhanced video processing, all-new production technology, an innovative library, and stock videos and other creative assets to help you create more polished, professional videos. No video experience needed. Anyone can create informative, engaging videos. Create professional, eye-catching videos: Add special video effects - Apply Behaviors that are perfectly designed to animate your text, images, or icons. Get a crisp, polished look without being a professional video editor. Drag-and-drop your edits - What you see is what you get. Every effect and element in your video can be dropped and edited directly in the preview window. And you can edit at resolutions up to beautiful 4K, for clear video at any size. Get exceptional performance - Camtasia takes full advantage of your computer’s processor with 64-bit performance. You’ll get fast rendering times and enhanced stability—even on your most complex projects. Camtasia 2026.1.3 changelog: Feature Updates Improved keyboard navigability in tool panels. Improved screen reader accessibility of headings in Preferences. Tool panels can now be resized using a keyboard-navigable control. Updated color of folder icon in User Library tab for better visibility. Grouped media now render a composite waveform considering all audio media within that group. Added Long Path Aware to the manifest of Editor and Recorder. Performance Improvements Improved performance for editing groups on the timeline. Improved the project loading performance when timeline has lots of trec media with cursor data. Updates for IT Administrators Updated cpp-httplib from 0.38.0 to 0.43.3. Updated expat from 2.7.4 to 2.8.0. Updated freetype from 2.13.3 to 2.14.3. Updated harfbuzz from 13.0.1 to 14.2.0. Updated libpng16 from 1.6.55 to 1.6.58. Updated pango from 1.57.0 to 1.57.1. Updated girepository from 2.86.3 to 2.88.0. Updated pcre2-posix from 10.47.0 to 12.0.2. Added new harfbuzz-gpu.dll. Updated FFmpeg from 7.1.1 to 7.1.2. Updated aom from 3.11.0 to 3.13.1. Updated dav1d from 1.5.0 to 1.5.1. Updated ogg from 1.3.5 to 1.3.6. Updated SDL2 from 2.32.4 to 2.32.10. Updated zlib from 1.3.1 to 1.3.2. Updated Nalpeiron binaries to version 4.4.69.3. Bug Fixes Fixed an issue which prevented some user submitted crash reports from being sent. Fixed a potential memory leak when decoding HEVC or VP9 video. Fixed a potential crash when trying to delete a range selection on a magnetic track. Fixed a bug with the Properties Panel showing stale properties when only a caption is selected on the timeline. Fixed an issue that could prevent the Opacity and Blur properties from being changed in the Background Removal effect. Fixed an issue where larger Camtasia online projects may fail to open in Camtasia Editor. Table of contents thumbnails are no longer created for Smart Player exports with no table of contents. Fix resetting skew revert to revert just skew and not scale as well. Fixed editing in Snagit with snagX file with Unicode characters. Fixed a bug where grouped visual media could be cropped in some cases. Fixed importing SnagX files with Unicode characters. Localization fixes. Download: Camtasia 2026.1.3 | 309.0 MB (Shareware) View: Camtasia Homepage | Tutorials | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware

  • Recent Achievements

    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
    • One Year In
      slackerzz earned a badge
      One Year In

  • Popular Contributors

    1. 1
      +primortal
      512
    2. 2
      PsYcHoKiLLa
      188
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!