Bonjour Service Removal


Recommended Posts

I was amazed when I realized it was actually the Bonjour service that was making my Windows Vista experience as painful as it was. Who would write such a "malware" I thought...

Then I started with all those conspiracy theories in my head as why there are so extreme amounts of security flaws caused by Axxxx and Axxxx software on Windows and could this possibly be made on purpose... I don't mean for you to take that part seriously, it was just a thought I had.

Anyway after removing this piece of "malware" I started enjoying Vista again and decided not to downgrade to XP.

I'm not saying this service is entirely bad, it just had bad conflict with my machine and I had no idea what was causing my machine to act so sluggish! And I wonder how many people have experienced it as well but just believed in all the anti-Vista rants and thought it was normal.

Edited by BrokenAI
  • 3 weeks later...

Hi everyone,

I read a guide similar to this, but they did not point out that I had to look for the specific dll in the registry. It merely said delete the registry entry with number 00000000005 (see below for registry location). So being a total fool, and believing everything I read on the net, away I went and did that.

I also did the same for the same entry, but it was for the 64 bit entry in the registry.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WinSock2\Parameters\NameSpace_Catalog5\Catalog_Entries\000000000005

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WinSock2\Parameters\NameSpace_Catalog5\Catalog_Entries64\000000000005

So then I find my internet dies, critical services are not starting, and my PC is more or less dead.

So I have obviously deleted the incorrect registry entry, one that was very important.

Is a windowsr re-install the only way to correct this? Any help would be amazing.

I tried an LSP fix, but it didn't seem to work.

kind regards

jonathan

  • 1 month later...
  • 4 months later...
  • 9 months later...
Hello,

I've suffered a few nasty experiences when trying to remove the Bonjour Service which is installed by Adobe/Apple products. Unlike a lot of services, the Bonjour Service has many nasty tentacles buried into critical system/registry settings and removing it without following the below instructions can do a few things like:

1. Disabling your network connection fatally (can only be resolved with a WinSock fix and only under certain circumstances)

2. Prevent the start-up of many important Windows Services like Event Viewer or System Event Notification. This has a drastic impact on your start-up/shut-down times.

Basically, removing the Bonjour Service can be an utter nightmare and the below instructions are the only ones that work 100% for me.

To remove the Bonjour Service:

  • Stop Bonjour Service by opening a command prompt (remember to open the command prompt with Administrator privileges in Vista) and type:
    sc stop ?bonjour service?
  • Once that is done, in the same command prompt typsc delete ?bonjour service?e?
  • Now we need to disable the Bonjour socket driver.
  • Start regedit.exe (with Administrator privileges in Vista) and go to tHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WinSock2\Parameters\NameSpace_Catalog5\Catalog_Entries\000000000004ze (please note: the final digit in this key may vary depending on your circumstances - look through all the entries under Catalog_Entries - the key you're dealing with shoulLibraryPath = C:\Program Files\Bonjour\mdnsNSP.dll)P.dll)l)
  • Within that key find the entry:
    Enabled=REG_DWORD:00000001 - change it from 1 to 0.
  • Exit out of the command prompt and reboot your PC.
  • Once you have logged back in, delete the C:\Program Files\Bonjour (with the files mDNSResponder.exe and mdnsNSP.dll).

There you have it - these instructions will work for Windows XP and Vista.

Windows Tech support is aware of this problem but will not post it on their site. They suggested that it be disabled via "msconfig"

Run "MSCONFIG" from command line as administrator.

Click the "Hide all Microsoft services at bottom of table

In "Service" tab unselect "##Id_string1.6844f930... it'll have a manufacture of "Apple Computer, Inc"

As a fail safe you can start task Manager and see that under the "services Tab" "Bonjour Service" has a discription of "##Id_string1.6844f930...

Save and reboot, computer will startup without Bonjour Service and Task Manager will show it as stopped and... no more Unidentified Network

Dunno why anyone would want to remove Bonjour its quite useful. I keep all my music on my Macintosh but sometimes I might be on my PC and Bonjour allows both iTunes to see each other for instant sharing of music so I can play it wherever I am within my home. Even if you don't use Bonjour removing it wont speed your computer up at all, its just pointless to remove.

Why does Bonjour even exist? AFAIK UPnP is the same thing and it's already cross-platform.

http://www.zeroconf.org/ZeroconfAndUPnP.html

On the surface, UPnP seems the same, but Zeroconf/Bonjour is far more suited for completely replacing a conventional DNS server. UPnP and Bonjour don't collide (like a lot of people seem to think), and Bonjour will actually pick up on many UPnP applications.

UPnP also has its own uses that Bonjour isn't geared towards. In the end, supporting both is actually the best way to go, but if you have to support one, Bonjour will get the job done quite nicely for what UPnP is usually used for.

http://www.zeroconf.org/ZeroconfAndUPnP.html

On the surface, UPnP seems the same, but Zeroconf/Bonjour is far more suited for completely replacing a conventional DNS server.

I don't see how. I can see all my UPnP devices automatically already and access them without configuring anything. OSX supports UPnP as well, doesn't it? Why reinvent the wheel if the new wheel is the same material and still round? ;) If Apple wanted UPnP to do something that wasn't in the specification all they needed to do was extend it.

I don't see how. I can see all my UPnP devices automatically already and access them without configuring anything. OSX supports UPnP as well, doesn't it? Why reinvent the wheel if the new wheel is the same material and still round? ;) If Apple wanted UPnP to do something that wasn't in the specification all they needed to do was extend it.

UPnP and Zeroconf have actually been in coexistence for a long time. The major difference is that UPnP won't work for replacing a DNS server. Zeroconf will broadcast services on your computer under a hostname (like Elliott-Computer.local). Any application can then use that hostname (so I can SSH into my box by using Elliott-Computer.local). UPnP doesn't allow for that.

Good guide, worked well Thanks.

And disabling Bonjour for me is a simple matter of not needing it, my desktop is the only machine that I run iTunes on, so I don't need its sharing features, and I can see the issue for some users is merely the fact that this stuff is installed along with other software without the user's consent.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I use it by choice but only for specific tasks that I have forgotten and it's quicker to ask then spend time wasted finding a decent answer on Google or coding a certain language. I prefer to use it. I do think that as it gets integrated into everything, when we eventually fully rely on it, I'm talking new gens not older gens like me, that we won't think for ourselves, I mean we will become lazy thinkers, lazy logical answer to problem which will go badly. But if we don't become fully dependant, we might be OK but I don't think personally we are going to be OK, not for the newer generations. Unless they advance in that space to the next level of intelligence where it can work out its own problems and create ideas for itself.
    • Pity the article on MS website gives no indication when said "20%" performance gains will actually be rolled out to users.
    • I just looked on my computer and there are settings and log files for utilities I have never even turned on!
    • O&O ShutUp10 3.1.1104 by Razvan Serea O&O ShutUp10 offers a simple yet effective way to take control of your Windows privacy. It provides access to almost 50 privacy-related tweaks, most of them hidden or not easily accessible to the average computer users. Using a very simple interface, you decide how Windows 10/11 should respect your privacy by deciding which unwanted functions should be deactivated. Using ShutUp10 you can easily disable Windows Defender, turn off telemetry, disable peer-to-peer updates, turn off Wi-Fi Sense, disable automatic Windows updates, turn off and reset Cortana and more. ShutUp10 allows you to create a System Restore point before you apply any changes, so that you can revert your system at any time if you run into problems. O&O ShutUp10 is entirely free and does not have to be installed – it can be simply run directly and immediately on your PC. And it will not install or download retrospectively unwanted or unnecessary software, like so many other programs do these days! O&O ShutUp10 Free and Premium The latest version brings O&O ShutUp10 Premium, expanding the app’s long-standing privacy controls with automatic enforcement of user-defined settings. Instead of manually rechecking options after every Windows update, users can set their preferred privacy configuration once—or apply recommended settings in a single click—and the tool continuously monitors them in the background. If Windows 10 or 11 re-enables disabled features or introduces new data collection paths, Premium restores the chosen settings automatically without user intervention. The free version remains available and fully functional for manual adjustments, offering the same core privacy controls for Windows. However, the Premium tier is aimed at users who want long-term, hands-off protection, adding automatic reapplication after updates, ongoing monitoring, and optional notifications to ensure privacy settings remain consistent over time. O&O ShutUp10 3.1.1104 changelog: Added “Show Differences” button in the overview panel “Don’t show again” option for the restore point prompt Ctrl+F keyboard shortcut for search/filter functionality Detection and linking of system-wide and user-specific setting associations Automatic search while typing PREM: Option to preserve notification counters and timestamps across application restarts PREM: Reset blocked settings button in the Settings dialog PREM: Informational message when no settings are blocked PREM: Update check can also be triggered from the menu PREM: Notification deduplication and activity log summary feature Improved L005 “Disable Windows Location Service”: Version-specific split (up to Windows 11 23H2) and new variant for Windows 11 24H2+ L001 (Disable Location): Added Night Light warning to the description in all languages Search now detects setting IDs even when ID display is disabled and offers to enable it Detection and removal of Copilot/AI desktop apps in RecallTerminator Optimized High DPI support PREM: Reset button is now only enabled when blocked items exist – setting IDs are shown in the confirmation dialog PREM: Updated tray icons with higher-resolution versions PREM: Activity Log timestamps now use localized date and time formats PREM: Tray icon status now uses OK/Warning indicators and localized tooltips PREM: Recall folder detection switched to service-based detection PREM: Copilot uninstallation now provides UI feedback and improved verification Fixed Description text was not displayed correctly for the last item and disappeared when clicking the scrollbar Crash when clicking a search result heading or the […] button PREM: Installation path is now correctly preserved during upgrades PREM: Tray icon was not reliably removed when exiting the application PREM: Main window was not displayed correctly in single-instance mode PREM: Incorrect display of the & symbol in tray icon tooltips on Windows 10 PREM: Fixed notification flooding after sleep/standby PREM: Dashboard was not refreshed after applying recommended settings during onboarding PREM: Progress bar was not reset after deleting Recall folders PREM: Fixed service startup failures PREM: Fixed incorrect drift detection when Automatic Protection was disabled PREM: Notifications now correctly count all deviating settings when protection is enabled PREM: Registration Wizard was shown after sleep/standby despite a valid license Download: O&O ShutUp10 3.1.1104 | 76.4 MB (Freeware) Download: O&O ShutUp10 32-bit | ARM64 View: O&O ShutUp10 Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      545
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Steven P.
      65
    5. 5
      ATLien_0
      64
  • Tell a friend

    Love Neowin? Tell a friend!