Recommended Posts

Hmm... the conversation's gone askew...

Anyway, loose tin foil hat or not, I still think an IP that keeps changing is better, since one that remains the same would mean it is always known you are on that compu. Like I've said earlier, I don't know much about these things, maybe nothing... :((

<snipped>

As for paranoia, I never worried about people trying to get me earlier, but about two months back, the computer went hang when I was on the net, and when I restarted manually, later I found that ZoneAlarm had blocked two serious attempts. A few days after that, the problems began: every time I started the computer, the Found New Hardware dialog would come up, and at times I even allowed it to run, but it would say the new hardware couldnt be installed. Then Internet Explorer (which I didnt use, just let it remain in the background) started opening on its own; later, I came to know that at least one part of the problem was by something called Trojan.Vundo. Since I had installed all the security apps, I found it strange that things (noise or whatever you call them) were able to get in, especially since I had till now never ever faced any such problem. So now, I think its better to be safe rather than finding oneself ****ed. To a person who doesn't know much, a burst in security warnings is bound to be unnerving.

Bitdefender blocked two port scanning attempts today... should I be worried...

Edited by Colin-uk

"Bitdefender blocked two port scanning attempts today... should I be worried..."

I thought you were going to put your router doing NAT? You would not see port scans if you were behind a NAT..

As to your IP changing.. Who is going to know???

"remains the same would mean it is always known you are on that compu. "

WHO is going to always know?? The people in the black helicopters?

As to how you got infected with "Trojan.Vundo" There are lots of way.

Put your modem back to being a NAT router vs just a bridge.

Changing the IP has its benefit in that I don't need to wait (as a free user) to download from RapidShare. I am not such a heavy downloader that I'd go in for a premium account. Earlier, with the modem saving the username password, I had to manually switch off / on the modem, and it would take up to two minutes for the whole process to complete. Now, once the modem connects to the network, all I have to do is just press disconnect on the internet connection dialog box, and relogin, and I can relogin in five seconds flat, and get to work.

I have tried using ipconfig /renew, but it gives the message "the operation failed as no adapter is in the state permissible for this operation"; I read that you have to keep the setting as "Obtain IP address automatically", and I tried that, now after some time, I get the message "An error occurred while renewing interface Net : unable to contact your DHCP server. Request has timed out."

If there is any method where the modem is a NAT router, and also the IP can be changed instantly, then tell me.

Yeah I caught the Canadian part -- did you not notice my "Canuck" reference? ;)

yeah but I tought you were talking to the Vancouver's guy..... (isn't there an NHL team witch name is Canuck's from Vancouver?)

http://canucks.nhl.com/

http://en.wikipedia.org/wiki/Canuck

I learn new things everyday!

... should I be worried...

yes you should, but not for the same reason you think.... as I've seen on your other thread, you wanted to use windows 98 on a double core three gigahertz pentium because XP is to slow, defenetly your heading to the wrong direction, your computer's probably filled up with viruses or spyware or adware or any kind of crap software that just shouldn't be there, and as for your router, look's like you just messed it all up and the situation is going out of control for you. This is not bad or pejorative, when we feel a pain on our body, we go see a doctor because it's impossible for everyone of us to know everything. I still think you should pay someone to come and help you a little bit, then everything would be fine..... :)

the link works but I only get a 1K file impossible to read in adobe 8.1 or 6.0

.... as I've seen on your other thread, you wanted to use windows 98 on a double core three gigahertz pentium because XP is to slow, defenetly your heading to the wrong direction, your computer's probably filled up with viruses or spyware or adware or any kind of crap software that just shouldn't be there ...

I've scanned the computer with BitDefender, and with all the scanning apps that Zone Alarm and SpyWare Doctor and SpyBot have, and they all say the computer is clean. But HD movies won't play properly on my computer, the audio and video go out of sync after a while. Maybe I should just format it all once and reinstall and then see what happens.

as for a pentium 4 being slow... are you sure it don't self protect itself because it's overheating (like half a inch of dust on the cpu heatsink)?

I don't know all of the anti-spy softwares you use, but I just would like you to know that some of those "great software" are just an open door for more sh*t.

also, some applications, that use/modify shared files and registery may cause compatibility problems between them, (specially if you use programs that were design for win 9x)...

and we could go on for a while like this....

I'm a automotive technician and tuesday this week, I had to fix a "no start" condition on a '97 hyundai accent. The owner of the car had been trying hard to get it running for the last 3 weeks because he don't have a lots of money and he wanted to save his pennies... result: I spent about three and a half hours just for putting back together all the things the owner messed up when I attempted to diagnose is problem..... then I spent about three quarter an hour diagnosing/fixing the reason why his car has been stuck in his driveway for the last 3 weeks.

By the way, the networking problem we should be talking about in this thread is still not solved as far as I can see.....

For the third time, please do yourself a favor! Your computer is screaming because he's hurt, call himself a doctor.

Changing the IP has its benefit in that I don't need to wait (as a free user) to download from RapidShare. I am

If there is any method where the modem is a NAT router, and also the IP can be changed instantly, then tell me.

Im not sure on your model, but most routers support a disconnect from the pppoe.. Just login to the router web ui to do this.. This would provide the same feature as you doing it on your computer.

So what you can not wait 30 freaking seconds to download a file???

Once your behind a NAT, doing a ipconfig /renew on your PC will do nothing but renew your lease from your routers dhcp server. Which would have to be enabled for starters, and yes your pc would have to be set to use dhcp to get its ip.

Which has NOTHING to do with what your public IP is. This would only be on your router, once you switch it back to NAT.

First thing I suggest before you attempt fixing any software issue, did you "stress and test" your hardware to make sure it is stable?

http://en.wikipedia.org/wiki/Stress_test

Went to the wikipedia page, found something called GIMPS, but the test there says it will take a month! Maybe you could guide me on this.

as for a pentium 4 being slow... are you sure it don't self protect itself because it's overheating (like half a inch of dust on the cpu heatsink)?

"self protect", what's that?

Well, my CPU fan makes a horrible noise at times, like someone is trying to kill it and it is calling out for help. In the older version of Win XP (the one that I have been using for more than an year now, and have messed up), in many drives, the Disk Cleanup just doesn't start, and at this time, the CPU fan starts working furiously. I called my computer guy, and he said that this is normal, and all new PCs have CPU fans which increase and decrease their speed. As for dust, he said there is nothing that can be done about it: he said he'd come and remove it from time to time, but asked me not to do it, as I might end up damaging something else.

I have found this new computer to be pretty slow when I look at all that it is (P4 3.0 GHz; 1 GB RAM); my older computer (P3 1.5 GHz; 256 MB RAM) gives pretty much the same performance it seems. I mean, I haven't found any real increase in the loading time of windows or of any softwares.

But I think before thinking of formatting the whole thing, I'll have to do something else to make sure there is no hardware problem.

And yes, I have to wait about an hour or so after one file finishes downloading from RapidShare; now all I do is press disconnect, and then connect again, and the whole process take ten seconds.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Waymo recalls self-driving software after cars enter closed freeway work zones by Paul Hill Waymo, the self-driving car maker owned by Alphabet – the parent company of Google –, has recalled some of its fifth-generation Automated Driving Systems (ADS). It did so after some of its cars drove through closed construction zones. According to the National Highway Traffic Safety Administration (NHTSA), the affected vehicles were capable of driving through a closed freeway construction zone and continuing to drive at speed. The listing on the NHTSA website says that Waymo is currently developing a solution to fix this issue, but in the meantime, freeway driving is being restricted. Waymo will update its ADS software so that vehicles can detect when they can avoid entering construction zones. According to the Safety Recall Report, on April 20, 2026, Waymo’s Field Safety Committee began meetings reviewing an event from April 11, 2026, and five events from April 19, 2026, where Waymo’s autonomous vehicles didn’t recognize and drove past ramp closure signs into the pre-planned freeway construction zones. This took place in Phoenix, Arizona. Separately, on May 18, 2026, seven Waymo vehicles entered freeway lanes with active construction in the San Francisco Bay Area by driving between cones that were placed to show the lane was closed. On the back of both of these events, Waymo restricted freeway driving until it could address the issue. In June, Waymo’s Safety Board reviewed the issue and additional information related to ADS performances around construction zones; then, as a result, it decided to conduct a recall. This development is not good for Waymo as it adds to a growing list of technical hiccups its cars have experienced. Ultimately, it will lead to more scrutiny from lawmakers around the world who will be more cautious about letting autonomous vehicles on their roads without tighter regulation. For readers in areas where Waymo operates, does this news make you more wary about stepping into one of these vehicles?
    • I'm still on Windows 10 22H2 because I didn't want to deal with all the issues in Windows 11, so I waited almost a week before installing the latest Patch Tuesday update (KB5094127), I went ahead and did it, and it was a huge mistake—ever since then, my File Explorer has seen a performance drop of about 30% when transferring large files... Once again, Microsoft has outdone itself! This update cannot be uninstalled, either through the Control Panel (via Settings) or by accessing Advanced Startup Options. The only possible alternative would be to use system restore points, but I’d have to reinstall all app and driver updates (and there’s no guarantee it would work). Or there’s the “nuclear option” of a in-place repair without losing files or apps, but even then, all my customizations would be lost! Microsoft just can’t help but mess everything up! Way to go, Microsoft! But I still don’t want your c****y Windows 11!
    • Microsoft: Windows 11 could finally solve a major issue across AMD, Nvidia, and Intel GPUs by Sayan Sen While Microsoft has been trying to improve it, Windows 11 is definitely not flawless, as even today some issues are taking a year to publicly acknowledge. However, one area of trouble that may finally see much better results soon is graphics driver crashes. Work on graphics driver timeouts, also called Timeout and Detection Recovery (TDR), is not new as the latest WDDM 3.2 also has specific improvements regarding it. Windows Display Driver Model (WDDM) version 3.2 is supported on Windows 11 24H2 and 25H2. However, with the upcoming version 26H2, TDR crash diagnosis could go to the next level as Microsoft is introducing a new DirectX 12 API feature called "DirectX Dump Files". Similar to how system memory dump files work when a system crashes or freezes or encounters any such major issue, DirectX Dump Files (DDF) will essentially record a snapshot of the GPU execution right at the moment a graphics-related crash or hang or freeze occurs, so that developers can better understand and diagnoze these TDR and timeout detection errors. The dump will be available as a .dxdmp file for analysis and it will be a comprehensive dump file generated with detailed insights about the hardware, drivers, Windows, as well as the affected application. This should be another welcome change in this department. Earlier at GDC 2026, when the technology was first debuted, Microsoft had shared more details regarding it. The company had explained how DDF is designed to gather data from every layer of the graphics stack into a single file, eliminating the need for developers to manually correlate logs from multiple tools. As mentioned above, the dump can contain a lot of useful details like GPU hardware state information such as register values, shader program counters, page fault virtual addresses, shader memory data, and command buffers. Alongside that, it also captures DirectX runtime and kernel information, including D3D objects, pipeline state objects, device error data, adapter details, and CPU call stacks. Microsoft says the feature has been built around two primary use cases: retail device removals and local device removals. The former allows developers to collect crash information from end users' systems in the field, while the latter helps QA teams and developers investigate issues on test machines. Developers will also be able to include up to 2 MB of custom application data through new D3D12 APIs, providing additional context for troubleshooting. In addition, Microsoft is introducing three dump collection modes ranging from zero-overhead capture, which has no runtime performance impact on supported hardware, to higher-detail modes that collect more vendor-specific debugging data. On compatible Tier 2 hardware, zero-overhead dumps will be enabled by default, meaning developers may begin receiving useful crash diagnostics without making any code changes. The table below explains the three tiers: Tier Description NO_OVERHEAD Enables crash capture with no runtime cost and is suitable for broad deployment MEDIUM_OVERHEAD Provides a balance, capturing additional diagnostic data with moderate impact HIGH_OVERHEAD Collects the most detailed GPU and driver state available, enabling deeper investigation at the cost of higher runtime overhead In terms of availability, the company expects broader release to be around the fall of 2026, which should be right around the time when Windows 11 version 26H2 lands. Right now, DirectX Dump Files are available as a preview and currently, only AMD has the compatible AgilitySDK Developer Preview driver version 26.10.07.02. You can find the official announcement post here on Microsoft's website.
    • And with SO much better perf than the laggy mess that is Files.
  • Recent Achievements

    • First Post
      BizSAR earned a badge
      First Post
    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      598
    2. 2
      +Edouard
      190
    3. 3
      PsYcHoKiLLa
      80
    4. 4
      Michael Scrip
      76
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!