Recommended Posts

Hmm... the conversation's gone askew...

Anyway, loose tin foil hat or not, I still think an IP that keeps changing is better, since one that remains the same would mean it is always known you are on that compu. Like I've said earlier, I don't know much about these things, maybe nothing... :((

<snipped>

As for paranoia, I never worried about people trying to get me earlier, but about two months back, the computer went hang when I was on the net, and when I restarted manually, later I found that ZoneAlarm had blocked two serious attempts. A few days after that, the problems began: every time I started the computer, the Found New Hardware dialog would come up, and at times I even allowed it to run, but it would say the new hardware couldnt be installed. Then Internet Explorer (which I didnt use, just let it remain in the background) started opening on its own; later, I came to know that at least one part of the problem was by something called Trojan.Vundo. Since I had installed all the security apps, I found it strange that things (noise or whatever you call them) were able to get in, especially since I had till now never ever faced any such problem. So now, I think its better to be safe rather than finding oneself ****ed. To a person who doesn't know much, a burst in security warnings is bound to be unnerving.

Bitdefender blocked two port scanning attempts today... should I be worried...

Edited by Colin-uk

"Bitdefender blocked two port scanning attempts today... should I be worried..."

I thought you were going to put your router doing NAT? You would not see port scans if you were behind a NAT..

As to your IP changing.. Who is going to know???

"remains the same would mean it is always known you are on that compu. "

WHO is going to always know?? The people in the black helicopters?

As to how you got infected with "Trojan.Vundo" There are lots of way.

Put your modem back to being a NAT router vs just a bridge.

Changing the IP has its benefit in that I don't need to wait (as a free user) to download from RapidShare. I am not such a heavy downloader that I'd go in for a premium account. Earlier, with the modem saving the username password, I had to manually switch off / on the modem, and it would take up to two minutes for the whole process to complete. Now, once the modem connects to the network, all I have to do is just press disconnect on the internet connection dialog box, and relogin, and I can relogin in five seconds flat, and get to work.

I have tried using ipconfig /renew, but it gives the message "the operation failed as no adapter is in the state permissible for this operation"; I read that you have to keep the setting as "Obtain IP address automatically", and I tried that, now after some time, I get the message "An error occurred while renewing interface Net : unable to contact your DHCP server. Request has timed out."

If there is any method where the modem is a NAT router, and also the IP can be changed instantly, then tell me.

Yeah I caught the Canadian part -- did you not notice my "Canuck" reference? ;)

yeah but I tought you were talking to the Vancouver's guy..... (isn't there an NHL team witch name is Canuck's from Vancouver?)

http://canucks.nhl.com/

http://en.wikipedia.org/wiki/Canuck

I learn new things everyday!

... should I be worried...

yes you should, but not for the same reason you think.... as I've seen on your other thread, you wanted to use windows 98 on a double core three gigahertz pentium because XP is to slow, defenetly your heading to the wrong direction, your computer's probably filled up with viruses or spyware or adware or any kind of crap software that just shouldn't be there, and as for your router, look's like you just messed it all up and the situation is going out of control for you. This is not bad or pejorative, when we feel a pain on our body, we go see a doctor because it's impossible for everyone of us to know everything. I still think you should pay someone to come and help you a little bit, then everything would be fine..... :)

the link works but I only get a 1K file impossible to read in adobe 8.1 or 6.0

.... as I've seen on your other thread, you wanted to use windows 98 on a double core three gigahertz pentium because XP is to slow, defenetly your heading to the wrong direction, your computer's probably filled up with viruses or spyware or adware or any kind of crap software that just shouldn't be there ...

I've scanned the computer with BitDefender, and with all the scanning apps that Zone Alarm and SpyWare Doctor and SpyBot have, and they all say the computer is clean. But HD movies won't play properly on my computer, the audio and video go out of sync after a while. Maybe I should just format it all once and reinstall and then see what happens.

as for a pentium 4 being slow... are you sure it don't self protect itself because it's overheating (like half a inch of dust on the cpu heatsink)?

I don't know all of the anti-spy softwares you use, but I just would like you to know that some of those "great software" are just an open door for more sh*t.

also, some applications, that use/modify shared files and registery may cause compatibility problems between them, (specially if you use programs that were design for win 9x)...

and we could go on for a while like this....

I'm a automotive technician and tuesday this week, I had to fix a "no start" condition on a '97 hyundai accent. The owner of the car had been trying hard to get it running for the last 3 weeks because he don't have a lots of money and he wanted to save his pennies... result: I spent about three and a half hours just for putting back together all the things the owner messed up when I attempted to diagnose is problem..... then I spent about three quarter an hour diagnosing/fixing the reason why his car has been stuck in his driveway for the last 3 weeks.

By the way, the networking problem we should be talking about in this thread is still not solved as far as I can see.....

For the third time, please do yourself a favor! Your computer is screaming because he's hurt, call himself a doctor.

Changing the IP has its benefit in that I don't need to wait (as a free user) to download from RapidShare. I am

If there is any method where the modem is a NAT router, and also the IP can be changed instantly, then tell me.

Im not sure on your model, but most routers support a disconnect from the pppoe.. Just login to the router web ui to do this.. This would provide the same feature as you doing it on your computer.

So what you can not wait 30 freaking seconds to download a file???

Once your behind a NAT, doing a ipconfig /renew on your PC will do nothing but renew your lease from your routers dhcp server. Which would have to be enabled for starters, and yes your pc would have to be set to use dhcp to get its ip.

Which has NOTHING to do with what your public IP is. This would only be on your router, once you switch it back to NAT.

First thing I suggest before you attempt fixing any software issue, did you "stress and test" your hardware to make sure it is stable?

http://en.wikipedia.org/wiki/Stress_test

Went to the wikipedia page, found something called GIMPS, but the test there says it will take a month! Maybe you could guide me on this.

as for a pentium 4 being slow... are you sure it don't self protect itself because it's overheating (like half a inch of dust on the cpu heatsink)?

"self protect", what's that?

Well, my CPU fan makes a horrible noise at times, like someone is trying to kill it and it is calling out for help. In the older version of Win XP (the one that I have been using for more than an year now, and have messed up), in many drives, the Disk Cleanup just doesn't start, and at this time, the CPU fan starts working furiously. I called my computer guy, and he said that this is normal, and all new PCs have CPU fans which increase and decrease their speed. As for dust, he said there is nothing that can be done about it: he said he'd come and remove it from time to time, but asked me not to do it, as I might end up damaging something else.

I have found this new computer to be pretty slow when I look at all that it is (P4 3.0 GHz; 1 GB RAM); my older computer (P3 1.5 GHz; 256 MB RAM) gives pretty much the same performance it seems. I mean, I haven't found any real increase in the loading time of windows or of any softwares.

But I think before thinking of formatting the whole thing, I'll have to do something else to make sure there is no hardware problem.

And yes, I have to wait about an hour or so after one file finishes downloading from RapidShare; now all I do is press disconnect, and then connect again, and the whole process take ten seconds.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Same Internet Archive seemed to grab the new version https://web.archive.org/web/20...d/Setup_MakeMKV_v1.18.4.exe Here's the link to an additional file it periodically downloads https://web.archive.org/web/20260213092148/https://www.makemkv.com/sdf.bin I think update's keys, etc. To manually trigger this update, put the sdf.bin file in the root of where the program is installed. When you launch the program it will pick up the file and import it. Typically put it here: C:\Program Files (x86)\MakeMKV\sdf.bin
    • Windows 11 KB5094126, KB5093998 bugging out Office apps but it may not be Microsoft's fault by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. Although the tech giant did not acknowledge any major problems, some users online reported various issues ranging from OneDrive and Dropbox access problems, BitLocker recovery lockouts, to blue screens and BSODs. You can read about them in this dedicated piece. While there is still no confirmation about those problems from Microsoft the company has admitted to another bug which we did not report on. The tech giant has confirmed it has received reports of an issue in which certain third-party applications may be unable to launch Microsoft Office apps or open Office documents after installing the Patch Tuesday. This affects both Windows 11 as well as Windows 10. The company says the problem impacts a subset of applications that rely on OLE (Object Linking and Embedding) automation to communicate with Microsoft Office programs. According to Microsoft, affected scenarios involve third-party software attempting to open Office applications or documents from within their own interface. In such cases, the Office program may fail to launch altogether, or the requested document may not open. Oddly there may not be any error message, which probably makes the issue difficult to diagnose. The bug affects several Office products, including Word, Excel, PowerPoint, Access, and other apps in the Microsoft Office suite when they are launched through the affected software. These include tax and accounting software such as CCH Engagement and Workpaper Manager, dental practice management solutions like Dentrix and Softdent, as well as the popular research and reference management tool Zotero. Microsoft adds that other applications using similar Office integration methods could also experience the same problematic behavior. To understand the issue it is important to look at OLE, the Microsoft technology involved. OLE allows different applications to work together and share data, while its Automation feature lets one program control another. Thus this enables third-party software to launch Microsoft Office apps, open documents, and perform tasks automatically without requiring users to switch between programs. Because many accounting, healthcare, research, and business applications rely on OLE automation to interact with Word, Excel, PowerPoint, and other Office apps, any disruption can break those workflows. As a result, affected software may be unable to open Office documents or launch Office applications even though the programs themselves continue to work normally. At the moment the company has not provided a permanent fix though it has confirmed that engineers are actively working on a resolution, which will be delivered through a future Windows update. As such additional details will be shared once more information becomes available. In the meantime, Microsoft recommends a simple workaround for affected users whic is to open the Office application or document directly rather than launching it through the third-party program. For enterprise customers and organizations managing larger deployments, Microsoft says an additional mitigation is available. Admins experiencing the problem on their managed devices are advised to contact Microsoft Support for business to obtain and apply the workaround.
    • It saddens me when cars are such dull colours now. Mine is bright metallic blue and I absolutely adore it for standing out in contrast to that depressing backdrop of traffic.
    • Sparkle 2.20.0 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.0 changelog: Debloat Tweak has animated border New homepage loading UI New Tweak Modal (Markdown Supported) Refactored GPU Detection Added Tests with vitest Added foobar2000 to apps Added Localsend to apps Updated Modal Styles Added styles for disabled inputs Added Animated Border to debloat-windows tweak Bumped dependencies Refactor System info logic for speed Tweak info modals now support Markdown Added Clear System info cache to settings Redesigned Home Page Loading UI Changed Some Icons around the app Download: Sparkle 2.20.0 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • lol it was a typo, fixed! haha imagine an actual 4TB Gen4 NVMe for $40 in 2026
  • Recent Achievements

    • Reacting Well
      Dys Topia earned a badge
      Reacting Well
    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      88
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!