Recommended Posts

And you paid that? Shoulda just replaced the ballast with a new one. Woulda cost about $100. These Honda/Acura dealerships just LOVE their customers because they know they can screw them over like that.

The dealer told me that the entire front bumper had to be removed and that it was dangerous for a novice to replace. It is a reputable Acura dealership, they have never screwed me before on anything.

I have yet to see a car with HID lights that didn't annoy the crap out of me. The aftermarket kits do suck since no one gets them realigned but the BMWs, Mercs and Audi's that have them factory installed annoy me just as much. They are just plain too bright. Although, trucks in my side view mirrors are FAR more annoying and can almost give me a headache.

HID lights may be bright but I can see quite well with just regular halogens and factory fog lights on (not those LAME aftermarket kits).

It's just because you're not used to it. Here in Belgium we start seeing all the time. I don't get annoyed by it and nor does someone else. At first, in the real early stages of xenon, a lot of people flashed their lights because they thought I was driving with my big lights but now ... now they're used to it. Everyone is.

Xenon is super.

I changed my headlights to xenon and more than tripple times better seeing range at nights was available for me and i really like it when i can see where i drive.

And you get really quickly used to it when anyone else have them. I usually don't nottice it at all.

I have yet to see a car with HID lights that didn't annoy the crap out of me. The aftermarket kits do suck since no one gets them realigned but the BMWs, Mercs and Audi's that have them factory installed annoy me just as much. They are just plain too bright. Although, trucks in my side view mirrors are FAR more annoying and can almost give me a headache.

Huh? They're less bright than regular halogen lights, above the projector cut-off.

Normal or "reflector" style headlights, as seen on most vehicles, disperse light in all directions. Because typical halogen bulbs aren't terribly bright, they aren't regulated in any way that requires more controlled projection. There are several variations of the pattern seen against a wall for these, but they're often something like:

346244_176_full.jpg

When these are retrofitted with HID bulbs, the result is illegal and dangerous.

HID (or "xenon") lights almost always are used exclusively with "projection" style headlamps. These include a lens that focuses most (if not all) of the light down toward the ground. When you're inside, or even behind a car with HID projectors (like a BMW / Audi with a factory Xenon option) you will very clearly see the cut-off line either on the road or a wall in front of you.

It is usually shaped like _____/???????

The lower part on the left is designed specifically to not project light at incoming traffic. Because incoming traffic is above the cut-off, you actually see far less light than you would from normal halogen lights. If you're below the cut-off, the light is very bright, very focused, and very white. Above the cut-off, it can be hard to even tell the headlights are on.

Here's an Audi factory xenon setup pointed at a wall:

bosch_cutoff_watermarked.jpg

Here's an Toyota Scion tC with retrofitted HIDs:

DSC07888_small.jpg

Unfortunately, the US DOT specs do not allow for as sharp a cut-off as the European specs do. My old car from several years ago had euro-spec HID projectors, and they looked especially dim if you were coming toward me (basically it looked as you'd expect a bright light pointed directly at the ground to look - you can see it, but since it's not pointed at you it isn't bright to look at in the slightest).

The "blue" that people see from HID lights is actually due to the cut-off. The light that is allowed to spill above it (as I said, a larger amount in the US than in Europe) is mainly the blue component of it. There are several reasons for this, one of which is simply aesthetics. But there are also lots of studies that show blue/white lights are less fatiguing to oncoming traffic than the yellowish color of typical halogens.

HID technology has also improved quite a lot. Most HID-equipped vehicles from Audi come with headlight washers, which prevent dirty lamps from dispersing excess light above the cut-off line. All factory Audi HID packages include auto-levellers, which adjust the height of the beam based on how the car is sitting on the road (going up or down hill, accelerating versus braking, etc) to limit the effect to traffic going the other way in those situations (although you're still going to get more light when passing while going up or down a significant hill).

Going around curves or approaching an HID-equipped vehicle from the side will also more likely expose you to the bright part of the pattern, but even this is being helped by cars like mine which actually direct the beams to the left or right as I go around turns. This was another Audi lighting technique, and is being copied by others (BMW, Lexus, etc) because of the obvious benefits both to the driver and to oncoming traffic.

I find that most people complaining about HID lighting are upset about:

A) Aftermarket kits which fit HID bulbs and ballasts into non-projector lamps

B) Kits with "upgraded" projectors designed to show "more blue" or other ridiculous, usually illegal modifications.

C) HID lights which are misaligned, dirty, or coming at them from an usual angle

D) Their own negative reaction to anything that sticks out as being more expensive than they can afford, and often a petty and immature "if I can't have it, no one can" attitude.

Unfortunately, this distracts from the real problem headlights which aren't HIDs, but rather SUV and truck lights which are always mounted far higher than is necessary. In a small car like mine, an Escalade or something behind me will flood the interior of my car with brighter-than-daylight illumination. It will blind my mirrors (without dimmers, I'd likely have crashed because of this by now) or my entire vision if I pass in front of them at a close intersection.

They should be much more heavily regulated, and required to place the lights at the same height as other vehicles if they're going to be driven on public roads and highways. That they are not is a danger to everyone driving a normal-sized car.

Edited by Brandon Live

Great post, Brandon Live. I have been using "E-Code" or European style halogen headlights from Hella in my car for the last year and the difference between that and the DOT approved lights is just amazing. They put so much more light on the road where I want it and less light spills around the edge. As stated most of the problem seems to come from people that have their HID's mis aimed.

Also try dealing with those jacked up trucks while driving a small convertible. We really need a law for maximum headlight height.

  • 5 months later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I use it by choice but only for specific tasks that I have forgotten and it's quicker to ask then spend time wasted finding a decent answer on Google or coding a certain language. I prefer to use it. I do think that as it gets integrated into everything, when we eventually fully rely on it, I'm talking new gens not older gens like me, that we won't think for ourselves, I mean we will become lazy thinkers, lazy logical answer to problem which will go badly. But if we don't become fully dependant, we might be OK but I don't think personally we are going to be OK, not for the newer generations. Unless they advance in that space to the next level of intelligence where it can work out its own problems and create ideas for itself.
    • Pity the article on MS website gives no indication when said "20%" performance gains will actually be rolled out to users.
    • I just looked on my computer and there are settings and log files for utilities I have never even turned on!
    • O&O ShutUp10 3.1.1104 by Razvan Serea O&O ShutUp10 offers a simple yet effective way to take control of your Windows privacy. It provides access to almost 50 privacy-related tweaks, most of them hidden or not easily accessible to the average computer users. Using a very simple interface, you decide how Windows 10/11 should respect your privacy by deciding which unwanted functions should be deactivated. Using ShutUp10 you can easily disable Windows Defender, turn off telemetry, disable peer-to-peer updates, turn off Wi-Fi Sense, disable automatic Windows updates, turn off and reset Cortana and more. ShutUp10 allows you to create a System Restore point before you apply any changes, so that you can revert your system at any time if you run into problems. O&O ShutUp10 is entirely free and does not have to be installed – it can be simply run directly and immediately on your PC. And it will not install or download retrospectively unwanted or unnecessary software, like so many other programs do these days! O&O ShutUp10 Free and Premium The latest version brings O&O ShutUp10 Premium, expanding the app’s long-standing privacy controls with automatic enforcement of user-defined settings. Instead of manually rechecking options after every Windows update, users can set their preferred privacy configuration once—or apply recommended settings in a single click—and the tool continuously monitors them in the background. If Windows 10 or 11 re-enables disabled features or introduces new data collection paths, Premium restores the chosen settings automatically without user intervention. The free version remains available and fully functional for manual adjustments, offering the same core privacy controls for Windows. However, the Premium tier is aimed at users who want long-term, hands-off protection, adding automatic reapplication after updates, ongoing monitoring, and optional notifications to ensure privacy settings remain consistent over time. O&O ShutUp10 3.1.1104 changelog: Added “Show Differences” button in the overview panel “Don’t show again” option for the restore point prompt Ctrl+F keyboard shortcut for search/filter functionality Detection and linking of system-wide and user-specific setting associations Automatic search while typing PREM: Option to preserve notification counters and timestamps across application restarts PREM: Reset blocked settings button in the Settings dialog PREM: Informational message when no settings are blocked PREM: Update check can also be triggered from the menu PREM: Notification deduplication and activity log summary feature Improved L005 “Disable Windows Location Service”: Version-specific split (up to Windows 11 23H2) and new variant for Windows 11 24H2+ L001 (Disable Location): Added Night Light warning to the description in all languages Search now detects setting IDs even when ID display is disabled and offers to enable it Detection and removal of Copilot/AI desktop apps in RecallTerminator Optimized High DPI support PREM: Reset button is now only enabled when blocked items exist – setting IDs are shown in the confirmation dialog PREM: Updated tray icons with higher-resolution versions PREM: Activity Log timestamps now use localized date and time formats PREM: Tray icon status now uses OK/Warning indicators and localized tooltips PREM: Recall folder detection switched to service-based detection PREM: Copilot uninstallation now provides UI feedback and improved verification Fixed Description text was not displayed correctly for the last item and disappeared when clicking the scrollbar Crash when clicking a search result heading or the […] button PREM: Installation path is now correctly preserved during upgrades PREM: Tray icon was not reliably removed when exiting the application PREM: Main window was not displayed correctly in single-instance mode PREM: Incorrect display of the & symbol in tray icon tooltips on Windows 10 PREM: Fixed notification flooding after sleep/standby PREM: Dashboard was not refreshed after applying recommended settings during onboarding PREM: Progress bar was not reset after deleting Recall folders PREM: Fixed service startup failures PREM: Fixed incorrect drift detection when Automatic Protection was disabled PREM: Notifications now correctly count all deviating settings when protection is enabled PREM: Registration Wizard was shown after sleep/standby despite a valid license Download: O&O ShutUp10 3.1.1104 | 76.4 MB (Freeware) Download: O&O ShutUp10 32-bit | ARM64 View: O&O ShutUp10 Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      545
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Steven P.
      65
    5. 5
      ATLien_0
      64
  • Tell a friend

    Love Neowin? Tell a friend!