Clueless girl in need of some PC advice!


Recommended Posts

hey guys

I posted here last week about my computer dying on me, well iv just about give up trying to fix it and decided rather then pay someone over 100 pound plus to fix my 3 yr old evesham for me im just going to buy a new one!!! Im looking to spend no more then 250 really, all i want is the base unit i have a nice screen and speakers etc from my old computer, iv looked on ebay but tbh i dont have a clue whats good and whats not! if anyone could help me out make a few suggestions on what i should be looking for that would be great!! thanks!

Lucy xxx :)

hey guys

I posted here last week about my computer dying on me, well iv just about give up trying to fix it and decided rather then pay someone over 100 pound plus to fix my 3 yr old evesham for me im just going to buy a new one!!! Im looking to spend no more then 250 really, all i want is the base unit i have a nice screen and speakers etc from my old computer, iv looked on ebay but tbh i dont have a clue whats good and whats not! if anyone could help me out make a few suggestions on what i should be looking for that would be great!! thanks!

Lucy xxx :)

Hey Lucy,

It might be useful for you to post a few of the things that you are looking at and that would give everyone a basis to work from in helping you decide what is good and what isn't. :)

usually a good indication of whats a good deal will depend on what your actually going to use the pc for :)

but for general usage, internet browsing, reading email and making office docs, you can find some decent spec machines at ebuyer.com

heya

im hoping my hard drive from my broken PC is ok, so hopefully il be able to put it inside the new one as a slave drive is that what its called? and whats overclocked?? im not sure see clueless! umm yh and 250 pounds is what i have to spend :)

im just looking at a few on ebay now i will post the links see what u guys think thanks alot ! xx

my current broken pc has 1.5 Ram which is working could i use that in a new one also? if theres room to slot it in of course

yeah its called a slave drive. but i think what you'll find in modern pc's now is that they'll use SATA instead of IDE. SATA doesnt use a master/slave system, it just has 1 hard drive on one channel (cable) so you dont have to mess around with jumpers or dodgy ribbon cables with all those pins that can get bent.

overclocking is where you setup your processor in the BIOS to run faster than its supposed to, i wouldnt really recommend it unless you really knew what you were doing as you could possibly damage your hardware.

if your current pc is around 3 years old, its quite likely that you wont be able to use your current ram in your new pc as it wont be compatible.

No one damages their hardware from overclocking any more unless they seriously overvolt their equipment.

Anyway, chances are the RAM in your old system is DDR, and the standard being used now is DDR2...there should still be a few budget boards around that have slots for both. With your budget, I'd try to save as much hardware as possible.

Can anyone summarize what happened in the other thread? Replacing hardware sounds like a much better idea than buying a new system with that budget.

heya

im hoping my hard drive from my broken PC is ok, so hopefully il be able to put it inside the new one as a slave drive is that what its called? and whats overclocked?? im not sure see clueless! umm yh and 250 pounds is what i have to spend :)

im just looking at a few on ebay now i will post the links see what u guys think thanks alot ! xx

my current broken pc has 1.5 Ram which is working could i use that in a new one also? if theres room to slot it in of course

Well, you could also buy something called an enclosure to put your old hard drive in. They don't cost too much, maybe $30 USD, and it basically will let you use your old hard drive as an external drive that you can just hook up with a USB cable or something.

Overclocking is just making the processor go faster than it's designed to go. However, the further you push the limits, the greater the chance of it burning out, so don't mess with it unless you know what you're doing.

As for the RAM, it's possible that you can put it in the new machine, but it all depends on what kind of RAM the old machine is using versus what the new machine can accept. Plus, you would need the slots.

What about building your own? I'm not sure how clueless you really are... :p

*nods*

lol build my own!! my ex boyfriend used to build computers and i would watch him do it i learnt abit but nowhere near enough to even think about building one from scratch!! shame hes not around anymore!! iv tried replacing the hardware on my old one i bought a new graphics card and new psu in effort to get it working, costs so far 70 pounds, and its still not working, i dont know how to replace anything else, someone at uni told me my motherboard could be buggerd inwhice case i may aswell just buy a new computer, mines 3 yrs old now and when i bought it new it cost me almost 1200!!! im just thinking if i can buy a machine thats loads better then my old one for couple hundred pound id rather do that then mess about tryin to get it fixed anymore, i really need a computer aswell right now fnal exams starting v soon and nothing to help me revise :( i just want something i can stick my old hard drive in and access my stuff off tbh

My old one just died one night it slowed right down and then the power just went, i put in a new psu unit and it started running again but the screen didnt come on just got an error message saying no signal on the screen, so i replaced the graphics card with an identical one and still nothing :(

This would be perfect..

INTEL DUAL CORE E2180

500GB SATA

4GB DDR2

8600GT 512MB

500GB 16MB CACHE HDD

20X DVDRW

All that for ?260 including delivery.

http://cgi.ebay.co.uk/INTEL-DUAL-CORE-E218...1QQcmdZViewItem

or

INTEL DUAL CORE E2180

320GB SATA

4 GB DDR2 20X DVDRW

320GB 8MB CACHE HDD

20X DVDRW

?215

im just thinking if i can buy a machine thats loads better then my old one for couple hundred pound id rather do that then mess about tryin to get it fixed anymore

I'm not sure about the prices over in the UK but I highly doubt you are going to be able to purchase, or build, a very nice system for a few hundred ?s'. I know over here in the US a decent machine can be had for around $700-$1000 but even that is outside the budget set aside by you so you might be better off getting someone to look over your system and give you an idea what is wrong.

A decent individual will give you a free consultation about the problem and then help you decide if you should spend your money on repair or a new system.:))

Edit: M.F.D.K - WOW, nice find, talk about a smoking deal!>

lol build my own!! my ex boyfriend used to build computers and i would watch him do it i learnt abit but nowhere near enough to even think about building one from scratch!! shame hes not around anymore!! iv tried replacing the hardware on my old one i bought a new graphics card and new psu in effort to get it working, costs so far 70 pounds, and its still not working, i dont know how to replace anything else, someone at uni told me my motherboard could be buggerd inwhice case i may aswell just buy a new computer, mines 3 yrs old now and when i bought it new it cost me almost 1200!!! im just thinking if i can buy a machine thats loads better then my old one for couple hundred pound id rather do that then mess about tryin to get it fixed anymore, i really need a computer aswell right now fnal exams starting v soon and nothing to help me revise :( i just want something i can stick my old hard drive in and access my stuff off tbh

My old one just died one night it slowed right down and then the power just went, i put in a new psu unit and it started running again but the screen didnt come on just got an error message saying no signal on the screen, so i replaced the graphics card with an identical one and still nothing :(

And what about the old one?

I guess we can help you to ensemble from scratch

This would be perfect..

INTEL DUAL CORE E2180

500GB SATA

4GB DDR2

8600GT 512MB

500GB 16MB CACHE HDD

20X DVDRW

All that for ?260 including delivery.

http://cgi.ebay.co.uk/INTEL-DUAL-CORE-E218...1QQcmdZViewItem

or

INTEL DUAL CORE E2180

320GB SATA

4 GB DDR2 20X DVDRW

320GB 8MB CACHE HDD

20X DVDRW

?215

that would be pretty much perfect, i was looking at those ones, shame its such an ugly case th:(:(

that would be pretty much perfect, i was looking at those ones, shame its such an ugly case tho :(

haha yeah I hate those gaudy cases too. I would definitely get a pc because imo repairing a 3 year old or more pc isn't really cost effective because it is still likely to haven more problems in my experience and often replacing parts on them is more expensive because of the old tech. If you are just using the pc for basic productivity and dual core with 2 gigs of ram should do fine. That ebay pc is one helluva deal though.

Doing that wouldn't be a problem if you were UBER careful. But accidents do happen.

If you have confidence in your abilities then go for it. Just make sure you don't fry any equipment with static discharge.

hmmm maybe i could buy it and put all its insides into my old computer case!? i have x spider case right now somthing like that! saying that tho id probly break somthing in the process and be back to square one lol xx

Its possible to do that, however you might just bite the bullet and use the slightly uglier case until after your finals and when you will have more time to sit back and work to get it done properly. :)

Its possible to do that, however you might just bite the bullet and use the slightly uglier case until after your finals and when you will have more time to sit back and work to get it done properly. :)

thats a good point actually, i could just hide it under my desk until uni finishes then ask a friend to come help me change it all over, he would come now but to busy with work and lives 100 miles away! :(

I like this one bit over budget but i could try cox my dad into topping up my budget for me! altho it has no operating system :( could i run windows off my old hard drive if i bought one of those enclosure thingys ??

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...A:IT&ih=014

thats a good point actually, i could just hide it under my desk until uni finishes then ask a friend to come help me change it all over, he would come now but to busy with work and lives 100 miles away! :(

I like this one bit over budget but i could try cox my dad into topping up my budget for me! altho it has no operating system :( could i run windows off my old hard drive if i bought one of those enclosure thingys ??

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...A:IT&ih=014

I'd more suggest using the copy of Windows you already own to install on the new drive and just use your old drive, externally, as a data storage device. This is a fairly simple process that most people here on Neowin can help you through. :)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • google, meta, microsoft, true cancers of modern society
    • TeraCopy 4.0 Build 28 by Razvan Serea TeraCopy is a compact program designed to copy and move files at the maximum possible speed, also providing you with a lot of features. Copy files faster. TeraCopy uses dynamically adjusted buffers to reduce seek times. Asynchronous copy speeds up file transfer between two physical hard drives. Pause and resume transfers. Pause copy process at any time to free up system resources and continue with a single click. Error recovery. In case of copy error, TeraCopy will try several times and in the worse case just skips the file, not terminating the entire transfer. Interactive file list. TeraCopy shows failed file transfers and lets you fix the problem and recopy only problem files. Shell integration. TeraCopy can completely replace Explorer copy and move functions, allowing you work with files as usual. TeraCopy is free for non-commercial use only. For commercial use you need to buy a license. The paid version of the program includes the following features: Copy/move to your favorite folders. Save reports as HTML and CSV files. Select files with the same extension/folder. Remove the selected files from the copy queue. Features added since version 3.17: Enhanced speed graph. New multi-threaded copy engine. Support for copying to multiple targets. Queue system for managing multiple copy operations. Support for receiving files via the LocalSend protocol. TeraCopy entry in the modern Windows Explorer context menu. Integrated toolbar in the title bar. Why receive LocalSend transfers with TeraCopy? Handle file conflicts: Skip, overwrite, or rename files when a file with the same name already exists. LocalSend always creates another copy, which can waste time and disk space, especially when resuming an interrupted transfer. Filter unwanted files: Apply ignore lists or remove files manually before accepting a transfer, so unnecessary files are not downloaded. Better performance on fast networks: In tests over a 10 Gbps connection, TeraCopy received files several times faster than the standard LocalSend app on Windows. TeraCopy 4.0 Build 28 changelog: Fixed a bug where Overwrite behaved as Overwrite All during same-drive move operations. AdvancedInstaller fixed the installer’s security vulnerability: EXE Bootstrapper resolved the %appdata% location incorrectly for the System account. Download: TeraCopy 4.0 Build 28 | 14.6 MB (Freeware, paid upgrade available) View: TeraCopy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • First exciting thing to come to Windows in a long time ! This is the kind of things they should focus on, instead of cramming as much AI as they can in everything.
    • New AMD graphics driver fixes install issues and FSR 4.1 crashes on RX 7000 GPUs by Taras Buria AMD is rolling out yet another graphics driver. Version 26.6.4 is now available for download, bringing two important fixes. One is for those still using Windows 10 and having trouble installing driver 26.6.2. In fact, this patch is coming from the recently released hotfix, so it is not new if you are already running version 26.6.3. The second fix is for RX 7000 owners. AMD recently brought FSR 4.1 support to the previous-gen graphics cards, but there was a bug with certain games crashing when using FSR 4.1. I experienced this issue with Forza Horizon 6, so today's driver should take care of that. Here is the official changelog: Intermittent install issue seen when installing AMD Software: Adrenalin Edition 26.6.2 on Windows® 10 systems for Radeon™ RX 7000 series and above graphics products. Intermittent application crash may be observed in some games with AMD FSR Upscaling 4.1 enabled on Radeon™ RX 7000 series graphics products. Known issues include the following: Intermittent application crash or driver timeout may be observed while playing Battlefield™ 6 on AMD Ryzen AI 9 HX 370. AMD is actively working on a resolution with the developer to be released as soon as possible. Texture flickering or corruption may appear while playing Battlefield™ 6 with AMD Record and Stream on some AMD graphics products. AMD FSR Upscaling and AMD FSR Frame Generation may show as inactive in AMD Software: Adrenalin Edition while playing Battlefield™ 6 when enabled on Radeon™ RX 9000 series graphics products. Failure to install may be observed while installing AI Bundle components in some regions with limited access to HuggingFace and GitHub. Model flickering or rendering failure may be observed in Maxon Cinema 4D and Blender on Radeon™ RX 7000 series and above graphics products. Users experiencing this issue are recommended to install AMD Software: Adrenalin Edition 26.3.1. Intermittent application crash may be observed on some models while running Blender on Radeon™ RX 7000 series and above graphics products. Users experiencing this issue are recommended to install AMD Software: Adrenalin Edition 26.3.1. You can download the AMD Radeon driver 26.6.4 from the official website here. Full release notes are available on the same page.
    • Amazon may use OpenAI and Nova models after Anthropic reportedly raises costs by Karthik Mudaliar Amazon is reportedly considering to use OpenAI models and even its own Nova family of AI models after Anthropic raised the cost of using Claude inside Amazon services. According to a report from The Information, Amazon is weighing its options to reduce costs under a new arrangement with Anthropic. But back in April, Amazon said it would invest $5 billion more in Anthropic, with the possibility of adding up to another $20 billion if certain commercial milestones are met. That investment actually came on top of another $8 billion Amazon had already put into the Claude maker. Anthropic, meanwhile, committed to spend more than $100 billion over 10 years on AWS technologies, including Amazon’s Trainium chips. Amazon isn't just a customer of Anthropic but also one of the most important backers and cloud partners. This is why it makes it interesting that Amazon is considering other alternatives to handle its internal workloads. Although Amazon has been building its own options for a while now. Its Nova family of AI models was announced in late 2024 for Amazon Bedrock, with models aimed at text, image, and video tasks. Amazon pitched the model around cost and latency at that time. With that said, OpenAI has also become a more realistic option recently for AWS customers as well as for Amazon itself. Earlier this year, OpenAI brought its latest models and Codex coding agent to Amazon Bedrock, after changes to its previously more restrictive Microsoft cloud arrangement. This allowed AWS to serve even those customers who wanted other alternatives from Claude, without having to move workloads out of Amazon's cloud. Evaluating alternatives could also be due to commercial pressure and not necessarily a sign of a damaged partnership between Amazon and Anthropic. Whether or not Amazon is actually considering switching entirely to OpenAI's models or its own Nova models remains unknown at this moment.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      536
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      97
    5. 5
      macoman
      61
  • Tell a friend

    Love Neowin? Tell a friend!