120mm Case Fans and cooling

By funciona
in Hardware Hangout

 Share

Recommended Posts

Community Regular

funciona

Posted
Posted

I was wondering some information about case fans :)

1: Are all case fans the same? I know some of them have silent features but do they all cool the same?

2: Is ONE 120mm case fan better than TWO 80mm case fans?

3: How many fans are good/bad? For example: ONE 120mm in the front, ONE 120mm in the back and ONE 80mm in the side (and the heatsink fan)

4: Are all heatsink fans the same?

4a: Are all heaksinks the same?

Link to comment
https://www.neowin.net/forum/topic/636596-120mm-case-fans-and-cooling/
Share on other sites
Grand Master

+Gary7 Subscriber²

Posted
  • Subscriber²
Posted

You should have one fan in front blowing in cold air, one in the rear of the case blowing it out. I think that 120mm is a little over kill.

All heat sinks are not the same and neither are the fans for them. A good source for this is below:

http://www.coolerguys.com/cooling.html

Community Regular

funciona

Posted
  • Author
Posted
You should have one fan in front blowing in cold air, one in the rear of the case blowing it out. I think that 120mm is a little over kill.

All heat sinks are not the same and neither are the fans for them. A good source for this is below:

http://www.coolerguys.com/cooling.html

Well could you give some recommendations on brands and models?

Grand Master

+Gary7 Subscriber²

Posted
  • Subscriber²
Posted

Here are a bunch of 80 mm case fans:

http://www.coolerguys.com/80.html

Here are some chipset heatsinks:

http://www.coolerguys.com/chipsetcooling.html

some noise conditioning stuff ( I hate a loud PC)

http://www.coolerguys.com/noisedampening.html

As far as the CPU heatsink and fan, you will have to know the make and model of the Processor.

Thermaltake is a good source as well:

http://thermaltakeusa.com/

Grand Master

+shift. MVC

Posted
  • MVC
Posted
Well could you give some recommendations on brands and models?

Noctua NF-P12: Click here

Noctua NF-S12-800, NF-S12-1200 and NF-R8: Click here

Noctua is the brand to go with if you're looking for fans that are both silent and provide adequate air flow.

Regarding CPU fans, you can have a heatsink and have a fan that only pushes air through the heatsink fins. Or you can have one that pushes, and another on the otherside that pulls, which enables even more air to be moved across the fins.

Of course, you would need an exhaust fan to exhaust all the warm air out as well.

The set up in my case is currently one exhaust fan, one front intake fan, and I have my Arctic Cooling Freezer 7 Pro bringing air across the heatsink fins which is then removed by the exhaust.

The PSU fan also adds air exhaust.

  • 2 weeks later...
Proficient

Neo Razgriz

Posted
Posted

Would having two Scythe S-Flex SFF21F fans attached to a Thermalright Ultra-120 eXtreme heatsink be a good thing for my near-future PC? Not to mention the case fans from the Thermaltake Armor +. If they will all work together, great, but all I fear for it is a heat trap.

Grand Master

+shift. MVC

Posted
  • MVC
Posted
Would having two Scythe S-Flex SFF21F fans attached to a Thermalright Ultra-120 eXtreme heatsink be a good thing for my near-future PC? Not to mention the case fans from the Thermaltake Armor +. If they will all work together, great, but all I fear for it is a heat trap.

Like a push pull fan setup? It would bring your temperatures down, but I'm not sure if it's worth the noise an extra fan would produce.

Then again, it's all personal preference when it comes to fan acoustics :)

Proficient

Neo Razgriz

Posted
Posted
Like a push pull fan setup? It would bring your temperatures down, but I'm not sure if it's worth the noise an extra fan would produce.

Then again, it's all personal preference when it comes to fan acoustics :)

Slightly increased noise, or a hot PC? (temperature wise, not sex appeal wise) I know where my heart is at! Depends on the "noise" output of the setup too.

Grand Master

+shift. MVC

Posted
  • MVC
Posted

Having push pull on a Thermalright will increase noise but result in cooler CPU temperatures.

Using that kind of configuration would all come down to a few things:

a) Can you afford the extra fans

b) Is the extra noise a problem

and

c) Do you REALLY need the lower temperatures

For most machines, a single fan set up on the heatsink will be perfectly fine.

Grand Master

GrimReeper

Posted
Posted

1. The larger the fan the more airflow and the slower it has to spin to achieve the same amount of airflow as a smaller fan. There are lots of fans that claim to be quiet but imo there is only 2 fans to consider for silence, Nexus for the best silence at the loss of airflow or Noctua for still silent but more airflow.

3: Depends on your case and specs. Some may be fine with a single 120mm exhaust fan and the gamers who have setups that run really hot may want/need a fan in every slot there case has room for.

4: No not all heatsink fans are the same, they are not the same as case fans in lots of cases and generally good for cooling but not for silence.

4a: Nope, some heatsinks are designed to be run totally passive. While some may be aimed at getting the coolest components regardless of noise or other factors. Some are made of copper and some aluminum etc

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • BrowserOS 0.46.0

      By Copernic · Posted

      BrowserOS 0.46.0 by Razvan Serea BrowserOS is a free, open-source Chromium-based browser that runs AI agents natively, offering a smarter, more productive browsing experience. It supports Chrome extensions and integrates AI agents to automate tasks, fill forms, and streamline workflows. Your data stays on your computer: you can use your own API keys or run local models via Ollama, making it a privacy-first alternative to tools like Perplexity, Comet, or Dia. With built-in productivity tools and app integrations, BrowserOS boosts efficiency while keeping control firmly in your hands. Being Chromium-based, BrowserOS lets you effortlessly import your bookmarks, passwords, and Chrome extensions in just a few clicks. BrowserOS works with OpenAI GPT models, Anthropic Claude, Google Gemini, and local AI models via Ollama or LMStudio. You can use your own API keys and effortlessly switch between providers. BrowserOS Agent Your AI productivity assistant that organizes and manages your browsing effortlessly Quickly list, group, or close tabs Save and resume browsing sessions Search your history and organize bookmarks Switch instantly to the tab you need BrowserOS Navigator – Automate web tasks with ease Navigate websites and search automatically Interact with pages without manual effort Handle repetitive tasks in seconds What makes BrowserOS special Feels like home - same familiar interface as Google Chrome, works with all your extensions AI agents that run on YOUR browser, not in the cloud Privacy first - bring your own keys or use local models with Ollama. Your browsing history stays on your computer Open source and community driven - see exactly what's happening under the hood MCP store to one-click install popular MCPs and use them directly in the browser bar (coming soon) Built-in AI ad blocker that works across more scenarios! BrowserOS 0.46.0 changelog: Run Claude Code & Codex right in your browser — We've extended the agent harness to bring full coding agents into BrowserOS. Claude Code and Codex now come bundled and plug straight into the assistant, so you can drive your browser with the agent — and the subscription — you already use. A brand new experience — A redesigned new tab, a calmer composer, and a rebuilt command center for switching between agents. The whole assistant is cleaner, faster to reach, and easier to live in. New MCP tools — We rebuilt the browser tool surface from the ground up — a tighter, more reliable set of tools for agents to drive the browser. Plus one-click install of BrowserOS as an MCP server into the agents you already run, with automatic URL sync. Chromium 148 — Updated to the latest Chromium base with all recent upstream fixes and security patches. Streamlined — We've pulled back a few features that weren't getting much use — Skills, Soul, and Memory — so we can focus and ship better versions of them soon. Download: BrowserOS 0.46.0 | 181.0 MB (Open Source) Download: BrowserOS for macOS | 485.0 MB Links: BrowserOS Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Politically funny images of the World

      By Michael Scrip · Posted

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component

      By hellowalkman · Posted

      Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The quantum search for Time's origin had an equally mind-boggling conclusion

      By cleverclogs · Posted

      The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20

      By Copernic · Posted

      VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware

  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      590
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!