Canada: Importing cars and taxes


Recommended Posts

Hey,

I'll probably need to move to Canada soon for a year or two. Now, I have an "old" Audi RS6 C5 here which I'd never want to sell, as a matter of fact I would like to take it with me. It's still registered in Germany (on the company's office there) and I would like to import it into Canada.

Now I'm asking you, probably a Canadian member, whether this is possible. I would like to know how much it will cost to import it (I have the shipping costs) and how much I'll pay for insurance and taxes.

Can anyone help me out please?

Regards,

James

Link to comment
https://www.neowin.net/forum/topic/639959-canada-importing-cars-and-taxes/
Share on other sites

well you won't have taxes as if you purchased it. You would have to get it shipped here and get it inspected for both an out of country inspection and an out of province inspection (about $500 for both together here). You will then need to register it (it's cheap, 70 bucks or so in Alberta). Your insurance rate will vary depending on age, driving history, if you took a class (though I'm not sure if an out of country course will award you any benefit or not), vehicle, type of insurance. Nobody can really give you an estimate but an insurance agent.

From:

http://www.tc.gc.ca/roadsafety/importation..._e.htm#visitors

VISITORS AND TOURISTS TO CANADA

Under Section 7(1)(b) of the Motor Vehicle Safety Act, a motor vehicle may be admitted temporarily into Canada without complying with the Motor Vehicle Safety Regulations if it is to be used exclusively by a person entering Canada as a visitor or a person passing through Canada to another country. Persons entering under a work permit or student visa will be considered as visitors for the application of this section of the Act. Any change in the status of the person entering the vehicle may invalidate the use of this section of the Act. The vehicle cannot be sold or otherwise disposed of while in Canada and cannot remain in Canada for a period longer than the time constraints listed on the work permit, student visa or any other Customs documents. Once these time limits are exceeded, the vehicle no longer qualifies for temporary entry under section 7(1)(b) of the Act and must be exported. As the Canada Customs and Revenue Agency also has requirements concerning the importation of vehicles, you may contact them at the address listed below.

More info: http://www.tc.gc.ca/roadsafety/importation/menu.htm

how old is the car?

there are some rules in canada where you cannot import a car under 15 years of age. importing a car into canada from us and from europe are two very different scenarios. usually they will be more lenient at the border with US cars but if it's coming from japan or from europe in your case, you might face some hardship.

google importing cars to canada and you will find lots of information.

http://www.riv.ca/

That's US to Canada but it may give you some insight.

Outside of the US to Canada info is here:

http://www.tc.gc.ca/roadsafety/importation/impxus_e.htm

Vehicles manufactured for sale in countries other than Canada and the United States do not comply with the requirements of the Canada Motor Vehicle Safety Act, CANNOT be altered to comply and CANNOT be imported into Canada. The only exceptions to this rule are vehicles fifteen (15) years old or older as determined by the month and year in which the vehicle was manufactured and buses manufactured before January 1, 1971.
  • 1 month later...

I know a few guys who imported cars from Japan, transported into a container to Vancouver and then shipped here to Quebec. The car has to be 15 years old or older and you will be in big trouble if that's not the case. For shipments from Japan, it cost one of my buddies about $700 to get his 1992 RX-7 from Japan to Montreal Quebec.

For Europe, I would assume shipping would be cheaper considering the distance, but I could be wrong. Once your car arrives here, it's inspected by Transport Canada. If everything's good, the shipping continues until it arrives in the province where you have to get it inspected by the province's DMV so you can license plate it.

Hey,

I'll probably need to move to Canada soon for a year or two. Now, I have an "old" Audi RS6 C5 here which I'd never want to sell, as a matter of fact I would like to take it with me. It's still registered in Germany (on the company's office there) and I would like to import it into Canada.

Now I'm asking you, probably a Canadian member, whether this is possible. I would like to know how much it will cost to import it (I have the shipping costs) and how much I'll pay for insurance and taxes.

Can anyone help me out please?

Regards,

James

Hey James, ;)

You should also check with the ministry of transportation of the province you are going to.

However, I personally think that importing a car for such a short period of time is a waste of time and money, but that's just me. :) Another thing you should consider is that most gas stations in Canada only offer fuel with 92 octane. I assume you drive your babe on 98 in Europe. ;)

Edited by zhiVago
Hey James, ;)

You should also check with the ministry of transportation of the province you are going to.

However, I personally think that importing a car for such a short period of time is a waste of time and money, but that's just me. :) Another thing you should consider is that most gas stations in Canada only offer fuel with 92 octane. I assume you drive your babe on 98 in Europe. ;)

the octane rating uses a different standard...

True. A 92 in Canada/US equals about 95 in Europe which can still cause a minor problem with the carburator if James has always driven his RS6 on 98 or even 100.

the change in fuel itself will be no problem, especially with a computer reset (just disconnect the battery for a bit). 92 in canada is about 95/96 in europe. I believe the RS6 can run on that without detonation no problem. Of course the car will accelerate differently, which might annoy you but as long as the car can run on 95/96 ron then it won't be harmful in the slightest.

It's indeed running on 98 now but a switch to 95 won't be that much of a problem.

Two years is indeed a short period but the only other possibility I have is to leave it in the company. I have 2 garage boxes available there but, even though the RS6 is not my daily, I can't miss the baby. I will have a daily car in Canada ( bought there ) but would love to take this little baby with me. It has too much emotion connected to it.

Once again, I'll probably have to end up placing it in the garage at the company.

  • 4 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • google, meta, microsoft, true cancers of modern society
    • TeraCopy 4.0 Build 28 by Razvan Serea TeraCopy is a compact program designed to copy and move files at the maximum possible speed, also providing you with a lot of features. Copy files faster. TeraCopy uses dynamically adjusted buffers to reduce seek times. Asynchronous copy speeds up file transfer between two physical hard drives. Pause and resume transfers. Pause copy process at any time to free up system resources and continue with a single click. Error recovery. In case of copy error, TeraCopy will try several times and in the worse case just skips the file, not terminating the entire transfer. Interactive file list. TeraCopy shows failed file transfers and lets you fix the problem and recopy only problem files. Shell integration. TeraCopy can completely replace Explorer copy and move functions, allowing you work with files as usual. TeraCopy is free for non-commercial use only. For commercial use you need to buy a license. The paid version of the program includes the following features: Copy/move to your favorite folders. Save reports as HTML and CSV files. Select files with the same extension/folder. Remove the selected files from the copy queue. Features added since version 3.17: Enhanced speed graph. New multi-threaded copy engine. Support for copying to multiple targets. Queue system for managing multiple copy operations. Support for receiving files via the LocalSend protocol. TeraCopy entry in the modern Windows Explorer context menu. Integrated toolbar in the title bar. Why receive LocalSend transfers with TeraCopy? Handle file conflicts: Skip, overwrite, or rename files when a file with the same name already exists. LocalSend always creates another copy, which can waste time and disk space, especially when resuming an interrupted transfer. Filter unwanted files: Apply ignore lists or remove files manually before accepting a transfer, so unnecessary files are not downloaded. Better performance on fast networks: In tests over a 10 Gbps connection, TeraCopy received files several times faster than the standard LocalSend app on Windows. TeraCopy 4.0 Build 28 changelog: Fixed a bug where Overwrite behaved as Overwrite All during same-drive move operations. AdvancedInstaller fixed the installer’s security vulnerability: EXE Bootstrapper resolved the %appdata% location incorrectly for the System account. Download: TeraCopy 4.0 Build 28 | 14.6 MB (Freeware, paid upgrade available) View: TeraCopy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • First exciting thing to come to Windows in a long time ! This is the kind of things they should focus on, instead of cramming as much AI as they can in everything.
    • New AMD graphics driver fixes install issues and FSR 4.1 crashes on RX 7000 GPUs by Taras Buria AMD is rolling out yet another graphics driver. Version 26.6.4 is now available for download, bringing two important fixes. One is for those still using Windows 10 and having trouble installing driver 26.6.2. In fact, this patch is coming from the recently released hotfix, so it is not new if you are already running version 26.6.3. The second fix is for RX 7000 owners. AMD recently brought FSR 4.1 support to the previous-gen graphics cards, but there was a bug with certain games crashing when using FSR 4.1. I experienced this issue with Forza Horizon 6, so today's driver should take care of that. Here is the official changelog: Intermittent install issue seen when installing AMD Software: Adrenalin Edition 26.6.2 on Windows® 10 systems for Radeon™ RX 7000 series and above graphics products. Intermittent application crash may be observed in some games with AMD FSR Upscaling 4.1 enabled on Radeon™ RX 7000 series graphics products. Known issues include the following: Intermittent application crash or driver timeout may be observed while playing Battlefield™ 6 on AMD Ryzen AI 9 HX 370. AMD is actively working on a resolution with the developer to be released as soon as possible. Texture flickering or corruption may appear while playing Battlefield™ 6 with AMD Record and Stream on some AMD graphics products. AMD FSR Upscaling and AMD FSR Frame Generation may show as inactive in AMD Software: Adrenalin Edition while playing Battlefield™ 6 when enabled on Radeon™ RX 9000 series graphics products. Failure to install may be observed while installing AI Bundle components in some regions with limited access to HuggingFace and GitHub. Model flickering or rendering failure may be observed in Maxon Cinema 4D and Blender on Radeon™ RX 7000 series and above graphics products. Users experiencing this issue are recommended to install AMD Software: Adrenalin Edition 26.3.1. Intermittent application crash may be observed on some models while running Blender on Radeon™ RX 7000 series and above graphics products. Users experiencing this issue are recommended to install AMD Software: Adrenalin Edition 26.3.1. You can download the AMD Radeon driver 26.6.4 from the official website here. Full release notes are available on the same page.
    • Amazon may use OpenAI and Nova models after Anthropic reportedly raises costs by Karthik Mudaliar Amazon is reportedly considering to use OpenAI models and even its own Nova family of AI models after Anthropic raised the cost of using Claude inside Amazon services. According to a report from The Information, Amazon is weighing its options to reduce costs under a new arrangement with Anthropic. But back in April, Amazon said it would invest $5 billion more in Anthropic, with the possibility of adding up to another $20 billion if certain commercial milestones are met. That investment actually came on top of another $8 billion Amazon had already put into the Claude maker. Anthropic, meanwhile, committed to spend more than $100 billion over 10 years on AWS technologies, including Amazon’s Trainium chips. Amazon isn't just a customer of Anthropic but also one of the most important backers and cloud partners. This is why it makes it interesting that Amazon is considering other alternatives to handle its internal workloads. Although Amazon has been building its own options for a while now. Its Nova family of AI models was announced in late 2024 for Amazon Bedrock, with models aimed at text, image, and video tasks. Amazon pitched the model around cost and latency at that time. With that said, OpenAI has also become a more realistic option recently for AWS customers as well as for Amazon itself. Earlier this year, OpenAI brought its latest models and Codex coding agent to Amazon Bedrock, after changes to its previously more restrictive Microsoft cloud arrangement. This allowed AWS to serve even those customers who wanted other alternatives from Claude, without having to move workloads out of Amazon's cloud. Evaluating alternatives could also be due to commercial pressure and not necessarily a sign of a damaged partnership between Amazon and Anthropic. Whether or not Amazon is actually considering switching entirely to OpenAI's models or its own Nova models remains unknown at this moment.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      536
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      97
    5. 5
      macoman
      61
  • Tell a friend

    Love Neowin? Tell a friend!