Canada: Importing cars and taxes


Recommended Posts

Hey,

I'll probably need to move to Canada soon for a year or two. Now, I have an "old" Audi RS6 C5 here which I'd never want to sell, as a matter of fact I would like to take it with me. It's still registered in Germany (on the company's office there) and I would like to import it into Canada.

Now I'm asking you, probably a Canadian member, whether this is possible. I would like to know how much it will cost to import it (I have the shipping costs) and how much I'll pay for insurance and taxes.

Can anyone help me out please?

Regards,

James

Link to comment
https://www.neowin.net/forum/topic/639959-canada-importing-cars-and-taxes/
Share on other sites

well you won't have taxes as if you purchased it. You would have to get it shipped here and get it inspected for both an out of country inspection and an out of province inspection (about $500 for both together here). You will then need to register it (it's cheap, 70 bucks or so in Alberta). Your insurance rate will vary depending on age, driving history, if you took a class (though I'm not sure if an out of country course will award you any benefit or not), vehicle, type of insurance. Nobody can really give you an estimate but an insurance agent.

From:

http://www.tc.gc.ca/roadsafety/importation..._e.htm#visitors

VISITORS AND TOURISTS TO CANADA

Under Section 7(1)(b) of the Motor Vehicle Safety Act, a motor vehicle may be admitted temporarily into Canada without complying with the Motor Vehicle Safety Regulations if it is to be used exclusively by a person entering Canada as a visitor or a person passing through Canada to another country. Persons entering under a work permit or student visa will be considered as visitors for the application of this section of the Act. Any change in the status of the person entering the vehicle may invalidate the use of this section of the Act. The vehicle cannot be sold or otherwise disposed of while in Canada and cannot remain in Canada for a period longer than the time constraints listed on the work permit, student visa or any other Customs documents. Once these time limits are exceeded, the vehicle no longer qualifies for temporary entry under section 7(1)(b) of the Act and must be exported. As the Canada Customs and Revenue Agency also has requirements concerning the importation of vehicles, you may contact them at the address listed below.

More info: http://www.tc.gc.ca/roadsafety/importation/menu.htm

how old is the car?

there are some rules in canada where you cannot import a car under 15 years of age. importing a car into canada from us and from europe are two very different scenarios. usually they will be more lenient at the border with US cars but if it's coming from japan or from europe in your case, you might face some hardship.

google importing cars to canada and you will find lots of information.

http://www.riv.ca/

That's US to Canada but it may give you some insight.

Outside of the US to Canada info is here:

http://www.tc.gc.ca/roadsafety/importation/impxus_e.htm

Vehicles manufactured for sale in countries other than Canada and the United States do not comply with the requirements of the Canada Motor Vehicle Safety Act, CANNOT be altered to comply and CANNOT be imported into Canada. The only exceptions to this rule are vehicles fifteen (15) years old or older as determined by the month and year in which the vehicle was manufactured and buses manufactured before January 1, 1971.
  • 1 month later...

I know a few guys who imported cars from Japan, transported into a container to Vancouver and then shipped here to Quebec. The car has to be 15 years old or older and you will be in big trouble if that's not the case. For shipments from Japan, it cost one of my buddies about $700 to get his 1992 RX-7 from Japan to Montreal Quebec.

For Europe, I would assume shipping would be cheaper considering the distance, but I could be wrong. Once your car arrives here, it's inspected by Transport Canada. If everything's good, the shipping continues until it arrives in the province where you have to get it inspected by the province's DMV so you can license plate it.

Hey,

I'll probably need to move to Canada soon for a year or two. Now, I have an "old" Audi RS6 C5 here which I'd never want to sell, as a matter of fact I would like to take it with me. It's still registered in Germany (on the company's office there) and I would like to import it into Canada.

Now I'm asking you, probably a Canadian member, whether this is possible. I would like to know how much it will cost to import it (I have the shipping costs) and how much I'll pay for insurance and taxes.

Can anyone help me out please?

Regards,

James

Hey James, ;)

You should also check with the ministry of transportation of the province you are going to.

However, I personally think that importing a car for such a short period of time is a waste of time and money, but that's just me. :) Another thing you should consider is that most gas stations in Canada only offer fuel with 92 octane. I assume you drive your babe on 98 in Europe. ;)

Edited by zhiVago
Hey James, ;)

You should also check with the ministry of transportation of the province you are going to.

However, I personally think that importing a car for such a short period of time is a waste of time and money, but that's just me. :) Another thing you should consider is that most gas stations in Canada only offer fuel with 92 octane. I assume you drive your babe on 98 in Europe. ;)

the octane rating uses a different standard...

True. A 92 in Canada/US equals about 95 in Europe which can still cause a minor problem with the carburator if James has always driven his RS6 on 98 or even 100.

the change in fuel itself will be no problem, especially with a computer reset (just disconnect the battery for a bit). 92 in canada is about 95/96 in europe. I believe the RS6 can run on that without detonation no problem. Of course the car will accelerate differently, which might annoy you but as long as the car can run on 95/96 ron then it won't be harmful in the slightest.

It's indeed running on 98 now but a switch to 95 won't be that much of a problem.

Two years is indeed a short period but the only other possibility I have is to leave it in the company. I have 2 garage boxes available there but, even though the RS6 is not my daily, I can't miss the baby. I will have a daily car in Canada ( bought there ) but would love to take this little baby with me. It has too much emotion connected to it.

Once again, I'll probably have to end up placing it in the garage at the company.

  • 4 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ummmm that is what is it supposed to do. Just turn if off in settings if you do not want it analyzing your open tabs. Chrome does the same thing with Gemini. Sarfari will do the samething after Apple's AI and even more so with the release of their 27 versions that is now powered by Googles LLM/ML models. Understanding why it is doing it and how it can help you vs jumping to some conspiracy theroy is a much better approach. As long as it can be turned off, all is good. Yes the default should be off but the a lot of people would never discover these features.
    • Just another reason (aside from many others) not to use Edge. Firefox 153.0b5 DEx64 has a similar feature added recently in prior builds that I will turn off at some point when I get around to it. It's the new "Something looks suspicious" page that pops up here and there. It cleverly hides itself between web pages that I've actually visited; as a result, you know, of selecting a web page and telling the browser where to go. The interesting thing is that it does not produce these warnings from pages that I, as the only intelligent user of the browser in my system, have ever directed the browser to open! What seems to be happening is that the browser looks at all the goofy ad links on a web page I do actually open and selects one that "looks suspicious" and then creates the "something looks suspicious" web page, which is neatly inserted, as mentioned, between web pages my RB ("real brain") has directed the browser to load in a session. The thing is, I usually look at links I am considering to follow before I ask the browser to load them, and in cases I have noticed where the link does indeed look suspicious, most of the time I will choose to not follow the link at all. Doesn't everyone do this or something similar? I am picky about what I voluntarily load... (I don't like links that start off fine, with a site designaiton that seems normal enough but then is followed by indecipherable alphanumeric strings many, many lines long, etc. I tend to reject those because they look suspicious. They may not be, but I don't care... I'll stay with Firefox, of course, if for no other reason than they usually let you turn off the junk you don't like. And because it isn't Edge... But at some point Microsoft will come to realize that putting your bookmarks on the left side is a Good Thing for a lot of people, just as Microsoft discovered when it had the bright idea of nailing the Windows taskbar to the bottom of the screen, when for decades Microsoft browsers had left that placement up to the user. They have finally reversed the obscenity of that decision. Finally.
    • Google was using the old CATPCHAs data to train their LLMs. What is the say they won't use this camera data of users to train their LLM? these companies need some strict regulations!
    • Depends on what you need. Might be a bit clearer on what you plan to do with it. Sort of a waste if you get the newest and greatest, but don't know how to use it.
    • NTLite 2026.06.11200 by Razvan Serea NTLite is a Windows configuration tool that allows you to modify your existing Windows install or an image yet to be deployed, remove Windows components, configure and integrate, speed up the Windows deployment process. Reduce Windows footprint on your RAM and storage drive memory. Remove components of your choice, guarded by compatibility safety mechanisms, which speed up finding that sweet spot. Windows Unattended feature support, providing many commonly used options on a single page for easy setup. Easily integrate a single or multiple drivers, update or language packages. Package integration features smart sorting, enabling you to seamlessly add packages for integration and the tool will apply them in the appropriate order, keeping hotfix compatibility in check. One of the important new features of NTLite (compared to its predecessors) is the ability to modify an already installed the operating system, by removing unnecessary components. Supports Windows 11, 10, 8.1 and 7, x86 and x64, live and image. Server editions of the same versions, excluding support for component removals and feature configuration. ARM64 image support in the alpha stage. Does not support Checked/Debug, Embedded, IoT editions, nor Vista or XP. NTLite 2026.06.11200 changelog: New Secure Boot Migration support: Verification, certificate staging, and boot-manager/sector update across the Image, Updates, Apply, and Create-ISO pages (2023 CA migration, optional 2011 revocation, Anti-rollback, Boot sector choice etc) Secure Boot Host Readiness: Live host Secure Boot migration monitor and Servicing-task control Option under Image page - C:\Windows row, or load the host as the target - Updates - Secure Boot Image: 'Sort mounted images first' option for the image list in Menu-Settings UI: Hover description card for Components and Unattended pages, selectable text and quick access to Compatibility options Command line: Relay commands into the already-running instance Enables controlling already running NTLite via ntlite.exe Use /NewInstance to launch an additional instance using CLI operations (premium) UI: 'New instance' option via main menu instead of a secondary ntlite.exe prompt Apply: Hide individual Apply-page notes with a per-note dismiss (X), critical excluded Settings: 'Unsigned RDP file launch warnings' tweak (RDP client), bypassing the April 2026 security-update prompt on RDP connections Upgrade Image: Live OS and deployed image editing now unlocked on free/test licenses, same licensing as images Image: 'Recompress' option in manual dialog Remove Editions to shrink the WIM in one session Image: SWM part size set inline on the Apply page and image dialogs, split-size popup retired Image: Relative 'Last change' dates; editions grouped by build time to reduce noise Image: 'Forget - Missing' on the Edit-cache menu to mass drop entries whose folder is gone Components: Root groups reorganized - user-facing groups first, system/critical last Components: Show filter options to view components by Template or App-type, since Apps are now merged into groups Presets: Delete confirmation now lists the multi-selected preset names UI: Design update propagated to the rest of the tool UI: Filter and search match words in any order and partially, better results filtering Components Unattended: Input-locale language derives from the user locale, with an independent keyboard picker, enables combinations previously unavailable Unattended: Input-locale now allows for a user value override Unattended: Localization OOBE WinPE now can be copied with the new WinPE Copy OOBE localization toggle, enter locale settings once for both stages Updates: Downloader greys and locks updates the image already carries (hotfix and MSIX) Updates: Resume interrupted update downloads Command line: Many upgrades, see /?, now prints help to the console or redirected output UI-Translation: Finnish language added, also thanks for Chinese Traditional (Matt), French (tistou77), Italian (clarensio), Russian (RDS), Swedish (1FF), Vietnamese (Vu Anh Vu) Fix Components: Containers removal breaking Apps deployment Components: Microsoft Account had leftovers when Easy Migrate is kept Image: Export to an existing WIM improvements, Append renamed to Merge Image: Improved 26H1 live removal support Image: No more 'X:\ not accessible' popup for certain drives during image scan Presets: Manual image refresh picks up presets added/removed outside the app Tweaks: Disabled visual-effect animations no longer return after first logon on a new profile Tweaks: Live Visual Effects toggles (animations, drag full windows, font smoothing) now apply correctly Download: NTLite 2026.06.11200 | 20.5 MB (Free, paid upgrade available) Link: NTLite Home Page | NTLite Features | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
    • First Post
      carols23 earned a badge
      First Post
    • One Month Later
      Tom Willson earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      257
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      94
    5. 5
      macoman
      67
  • Tell a friend

    Love Neowin? Tell a friend!