Deep Freeze... Why isnt it as popular as I think it should be?


Recommended Posts

I saw a thread about how people manage their security on ars technica.

Personally, I would never even consider running a computer without installing deep freeze immediately after a fresh install, before connecting to the net. It's like the final lock in the system, with near zero performance hit.

I guess I'm just wondering why this isnt a more popular solution! It's also cheap. And for my data, I just have it on a seperate partition that is not frozen.

If you dont know what it is you can check it out at the link. Literally one reboot and your hdd is untouched.

Thoughts?

http://www.faronics.com/html/deepfreeze.asp

Well, it is more famous on the education departments, both my High School and University computer labs used it.

I don't see a use for it personally, im always installing new apps and changing config files, i think it would just be a hassle.

Well, it is more famous on the education departments, both my High School and University computer labs used it.

I don't see a use for it personally, im always installing new apps and changing config files, i think it would just be a hassle.

I figure the gain in security is simply not worth it for the amount of hassle and arsing around I'd have to go through in order to use my computer daily with it.

Hmm... maybe I am just super neurotic about a clean system... but I think it's worth it.

To install new stuff, you type in the DF password, and then reboot into an unfrozen state. You can then tell it, on next reboot, to freeze again.

As far as bookmarks etc, I just keep em 'in the cloud'.

Does anybody else out there use DF?

The very concept of needing a reboot to get to unfrozen state is a turn off. What I do is I image my hard drive after I have a windows install up to date and with all the apps I use installed. Now when I run in to issues either because of infection or because of issues caused by a program I tried out I simply restore the image which takes 10 mins and voila I have a fresh install in mins. This in my opinion is a lot simpler compared to frequent switches between freeze and defreeze mode.

That said its a perfect solution for public computer where they simply don't want people messing with it. All you need is a reboot. Can't get more simpler than that.

The very concept of needing a reboot to get to unfrozen state is a turn off. What I do is I image my hard drive after I have a windows install up to date and with all the apps I use installed. Now when I run in to issues either because of infection or because of issues caused by a program I tried out I simply restore the image which takes 10 mins and voila I have a fresh install in mins. This in my opinion is a lot simpler compared to frequent switches between freeze and defreeze mode.

^^^

since i don't run every exe and go to every shifty russian website i can find, i don't need that kind of ridiculously over-the-top cleanliness/security. i'll keep an image in a hidden partition, just in case things get really nasty, but i might have to restore that... pfft... once a year, tops.

doesn't seem practical for a home user. think of the madness when you'd fix up a relative's machine and they call you the next day FREAKING OUT because all the things they just did the previous day are gone. before you say "oh that wouldn't happen - i'd just show them how to unfreeze blah blah blah".... no.... if they won't even bother to use firefox when there's a firefox icon right beside the ie6/7 icon, they aren't going to bother with this.

every school I've seen has used deepfreeze, its more for computer stupid people and school where you dont want people messing with ****. For example I have installed on my fathers pc at his house. Since then, the stupid calls of "why do i keep getting messages telling me I won $10,000. Do they send me a check or something?" have since stopped.

^^^

since i don't run every exe and go to every shifty russian website i can find, i don't need that kind of ridiculously over-the-top cleanliness/security. i'll keep an image in a hidden partition, just in case things get really nasty, but i might have to restore that... pfft... once a year, tops.

doesn't seem practical for a home user. think of the madness when you'd fix up a relative's machine and they call you the next day FREAKING OUT because all the things they just did the previous day are gone. before you say "oh that wouldn't happen - i'd just show them how to unfreeze blah blah blah".... no.... if they won't even bother to use firefox when there's a firefox icon right beside the ie6/7 icon, they aren't going to bother with this.

I wasn't recommending it for a home user especially not for people who do not have a clear understanding of how computers work. Just incase it wasn't clear.

every school I've seen has used deepfreeze, its more for computer stupid people and school where you dont want people messing with ****. For example I have installed on my fathers pc at his house. Since then, the stupid calls of "why do i keep getting messages telling me I won $10,000. Do they send me a check or something?" have since stopped.

haha

Maybe Microsoft will make it better.... They've got a similar program in development called "SteadyState"..... at least, i think its still in dev.... correct me if i'm wrong.

Been out for nearly a year now - http://www.microsoft.com/downloads/details...;displaylang=en

As other people mentioned, it pretty much makes your computer useless.

I'm running firewalls on all my computers (app based firewalls) and AV on my Windows PC, and my router is running another firewall (set to reject everything by default), a port scanner shows a total of 1 port open, and that's just when I'm running the app on that port.

My configuration gives me good security, and i can still save files.

We use deepfreeze at work. For public computers it rocks. ITs not really meant for home use.

You can set it to automatically unfreeze at a certain time and then have wsus download the updates at that time and have the virus scan do the same time then have the computer refreeze at a specific time.

You can also use the deep freeze console to remotely wake up the pc.

ITs also pretty hard to crack.

With deepfreeze you can also have a thaw drive which is allowed to be changed and not effected so if yo uwant to store all your documents and music and game saves and stuff create a thaw drive.

Deepfreeze is awesome!!!!!

IMHO, Deep Freeze is only worth getting if you have to handle a large amount of public access computers...or if you have a kid at home who screws things up all the time.

Internet Cafes, Some college/university labs, some high school labs, public terminals - all great places for this product.

But if you have a good domain admin, you can pretty much set rules to restrict just about anything and get as detailed as you need. DF is just a quick and dirty solution.

The down side.. is that you can't do automatic updates... since DF would just revet it. Same goes for any changes you push using Group Policy... DF would just revert them next time you boot up.. and the policy would have to be pushed again...and again...and again...

My school has deepfreeze on every computer students use, but they also have Novell on there with everything restricted, and Norton and SpySweeper. They have the network drives with our home folder unfrozen. But i think they're pretty secure there. haha. That bad thing about it is that they dont get automatic updates. They only have SP1 on the computers.

IMHO, Deep Freeze is only worth getting if you have to handle a large amount of public access computers...or if you have a kid at home who screws things up all the time.

Internet Cafes, Some college/university labs, some high school labs, public terminals - all great places for this product.

But if you have a good domain admin, you can pretty much set rules to restrict just about anything and get as detailed as you need. DF is just a quick and dirty solution.

The down side.. is that you can't do automatic updates... since DF would just revet it. Same goes for any changes you push using Group Policy... DF would just revert them next time you boot up.. and the policy would have to be pushed again...and again...and again...

Your wrong. Deep freeze allows yo uto have dep freeze automatically have the computer reboot unfrozen and then set a time where the pc reboots frozen. Then you use Group policy to set windows update to download the updates from an wsus server at that time. Deep freeze compliments grou policy very well. we use deep freeze with an antivirus server, group policy and wsus all work perfectly.

If you dont beleive me here is fro mthere web site

http://www.faronics.com/html/deepfreeze.asp

"Schedule Thawed Maintenance periods to perform Windows updates through the Internet or a SUS/WSUS server or run a custom batch file to update your antivirus definitions

Schedule Send Message tasks "

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft admits one of the most crucial Outlook features is currently broken by Sayan Sen Microsoft is making some decent progress when it comes to Windows 11. Recently we have confirmed reports of some rather useful improvements landing in the next version of the OS, 26H2, wherein GPU driver TDR crashes may finally be fixed, plus the company is also allowing users to disable web content on the Search. On the Outlook front though things have not been so rosy. Last month in May we reported several problems affecting basic functionalities on the app. These included a problem where documents would open blank or corrupt themselves. Following that, Quick Steps, a very useful feature, would no longer work correctly, and finally, Microsoft acknowledged a problem wherein images would fail to load up properly inside the email. Microsoft had resolved those bugs later and almost exactly a month after we reported on them, the company has now admitted a new similarly basic issue, this time on Macs. Users recently started noticing that Outlook would no longer display email threads properly as the original message itself was not displayed. An affected user Tsoumpas, C (ngmb) nicely described the problem in a forum post they made on Microsoft's site. They wrote: "Description of the issue: After updating Outlook for Mac [Version 16.110 (26061317)] on 18/6/2026, replying to any email no longer includes the original message in the reply window. Prior to the update, replies correctly contained the original email text below my response. Expected behavior: The original message should be included in the reply, as in previous Outlook versions and according to the configured reply settings. Actual behavior: The reply window contains only a blank composition area (or only my response), with none of the original email text included." Obviously this must be a highly frustrating for users as noted by several in that thread. The post, at the time of writing, has also been upvoted by more than 40 users indicating that is a fairly widespread bug. Thankfully Microsoft seems to have acknowledged the problem right around that time as it opened a new issue on its official website. In the support article, the company recommends switching to Outlook for Mac from the legacy app, where the problem appears to be happening.
    • PotPlayer 260622 by Razvan Serea PotPlayer is an extremely light-weight multimedia player for Windows. It feels like the KMPlayer, but is in active development. Supports almost every available video formats out there. PotPlayer contains internal codecs and there is no need to install codecs manually. Other key features include WebCam/Analog/Digital TV devices support, gapless video playback, DXVA, live broadcasting. Distinctive features of the player is a high quality playback, support for all modern video and audio formats and a built DXVA video codecs. A wide range of subtitles are supported and you are also able to capture audio, video, and screenshots. A comprehensive video and audio player, that also supports TV channels, subtitles and skins. Its been described on the Internet as The KMPlayer redux, and it pretty much is. Daum PotPlayer 260622 (1.7.22963) changelog: Removed Kakao TV Added pause function when navigating via the navigation bar Significantly improved internal stability Fixed an issue where colors appeared strange during RGB24 processing Improved playback for some HTTP streams Improved sync processing for the built-in audio renderer Fixed an issue where certain MP4 files behaved abnormally during playback Download: Daum PotPlayer (64-bit) | 54.7 MB (Freeware) Download: Daum PotPlayer (32-bit) | 61.1 MB View: Daum PotPlayer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.44 is out.
    • Speccy 1.34.084 by Razvan Serea Speccy will give you detailed statistics on every piece of hardware in your computer. Including CPU, Motherboard, RAM, Graphics Cards, Hard Disks, Optical Drives, Audio support. Additionally Speccy adds the temperatures of your different components, so you can easily see if there's a problem! Processor brand and model Hard drive size and speed Amount of memory (RAM) Graphics card Operating system At first glance, Speccy may seem like an application for system administrators and power users. It certainly is, but Speccy can also help normal users, in everyday computing life. If you need to add more memory to your system, for example, you can check how many memory slots your computer has and what memory's already installed. Then you can go out and buy the right type of memory to add on or replace what you've already got. Download: Speccy 1.34.084 | 20.5 MB (Freeware) View: Speccy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • ImgDrive 2.2.7 by Razvan Serea ImgDrive is a CD/DVD/BD emulator - a tool that allows you to mount optical disc images by simply clicking on them in Windows Explorer. If you have downloaded an ISO image and want to use it without burning it to a blank disc, ImgDrive is the easiest way to do it. ImgDrive features: One-click mounting of iso, cue, nrg, mds/mdf, ccd, isz images Runs on 32-bit and 64-bit Windows versions Mount ape, flac, m4a, wav, wavpack, tta file as AUDIO CD (16-bit/44.1kHz) Mount a folder as DVD/BD Mount images in command line Does not require rebooting after installation Support up to 7 virtual drives at the same time Support multi session disc image (ccd/mds/nrg) A special portable version is available Translated to more than 10 languages Support File Type: .ccd - CloneCD image files .cue - Cue sheets files of ape/flac/m4a/tta/wav/wv/bin .iso - Standard ISO image files .isz - Compressed ISO image files .nrg - Nero image files .mds - Media descriptor image files ImgDrive 2.2.7 changelog: Added command line parameter to set number of drives Added AACS-Auth support for HD DVD Bumped kernel driver version to 2.2.7 Download: ImgDrive 2.2.7 | 692 KB (Freeware, paid upgrade available) Download: ImgDrive Portable 535 KB View: ImgDrive Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!