Mac OS X Snow Leopard Discussion

By giga
in Apple (macOS)

 Share

Recommended Posts

Grand Master

Quillz

Posted
Posted
Resolution Independence wasn't removed from Leopard, it's just enabled only in specific circumstances (and it's buggy and slow because it's unfinished)

Picture%2010.png

What's in Snow Leopard would be much better.

So then... it's finished in Snow Leopard?

Grand Master

.Neo

Posted
Posted

Apparently there are still spacing issues here and there, also seen in the above screen shot.

I'm a bit amazed by the fact how fast the system is on my 2009 Mac Pro. However, why does System Profiler say "No" under 64-bit Kernel and Extensions? :o

Grand Master

Quillz

Posted
Posted
Apparently there are still spacing issues here and there, also seen in the above screen shot.

I'm a bit amazed by the fact how fast the system is on my 2009 Mac Pro. However, why does System Profiler say "No" under 64-bit Kernel and Extensions? :o

Because it's not turned on by default, and I believe this will remain so in the gold master of Snow Leopard.

You're supposed to turn on your Mac and hold down the "6" and "4" keys to activate the 64-bit kernel mode.

Grand Master

.Neo

Posted
Posted

Why isn't it turned on by default? I though Snow Leopard was all about being fully 64-bit and stuff.

Edit Managed to boot my Mac into full 64-bit mode the way you described. Are there any downsides to this, compared to using a 32-bit kernel? Maybe driver related stuff?

Grand Master

Quillz

Posted
Posted
Why isn't it turned on by default? I though Snow Leopard was all about being fully 64-bit and stuff.

You'd think so. Now there are reports that the 64-kernel isn't even supported on the original Mac Pro models.

You know, the ones Apple touted as being "64-bit Unix workstations."

Grand Master

Hell-In-A-Handbasket

Posted
Posted

will this activate it perma, or is it only activated when you do this, and only when.

would kinda blow if you had to do a key combo to do it

Because it's not turned on by default, and I believe this will remain so in the gold master of Snow Leopard.

You're supposed to turn on your Mac and hold down the "6" and "4" keys to activate the 64-bit kernel mode.

Grand Master

The_Decryptor Veteran

Posted
  • Veteran
Posted
So then... it's finished in Snow Leopard?

No idea, I'm not in the program to get the builds.

I would assume spacing issues and theme issues would have been worked out (in leopard most controls were vector drawn when scaled, apart from scrollbars, which were rasters)

I think it'd get much faster if QuartzGL was enabled by default for everything as well.

Grand Master

.Neo

Posted
Posted (edited)
will this activate it perma, or is it only activated when you do this, and only when.

would kinda blow if you had to do a key combo to do it

Apparently you'll boot with a 32-bit kernel by default. By holding the [4] and [6] keys after you hear the start up sound you'll boot with a 64-bit kernel. You can go back to 32-bit by holding the [2] and [3] keys when booting.

Would be nice if someone knew the actual reasoning behind this and what potential downsides are to using the 64-bit kernel.

Edit I just noticed that all the QuickTime 7 Pro "Pro" features are locked again until you fill in your registration. I expected this would happen.

post-128385-1250230695.png

Edited by .Neo
Grand Master

The_Decryptor Veteran

Posted
  • Veteran
Posted

Running a 64bit kernel stops you from running any 32bit kernel extensions (drivers, etc.)

The Xserve's default to the 64bit kernel because there's a lot less chance of people plugging consumer hardware into those.

Well, that's what I assume anyway, it does make sense with the hybrid setup they're going for.

Collaborator

dyn

Posted
Posted
Am I the only one that likes the little aqua bits? :laugh:

-Rich-

I like the blue aqua theme as well because it makes the OS a bit more lively. Using graphite or the scrollbars from iTunes makes it a very boring grey OS. That would be more like going back in time when we had black/white screens. I think having some color in the OS will make it more pleasant to use.

Grand Master

NeoXY

Posted
Posted
What's different about the new version?

Yes, I'd like to know as well. Can't seem to find any info online.

Have anyone installed the supposed GM build yet? Its been leaked. Just wondering what the experience is like currently. I have some extra time this weekend, I'm considering transitioning to SL if the GM build checks out...

Rising Star

ThehAWKs

Posted
Posted

I just did the update to snow leopard build 10A432 since it was said to be gold master, i thought i would have a hard time getting it running. but it was even easier then the last build.

i noticed a few changes on installing 10A432 build, it's more stable and a bit faster then the last my geekbench score went up from 13199 (Build 10A421a) to 14315 (Build 10A432)

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Nearly 70% of Steam users now run Windows 11

      By grunger106 · Posted

      What would be the point wasting time, money and resource testing EOL operating systems?
    • Nearly 70% of Steam users now run Windows 11

      By eilegz · Posted

      expected when they force you by having to use TPM and secure boot for anti cheat crap, and lazy developers only test on windows 11.
    • Microsoft is making Windows 11's context menus faster, simpler, and configurable

      By RejZoR · Posted

      The fact I need to use "Show more" like 99% of the time is so annoying. Or why I have 7-zip under 3 submenus when it could be in top. And Microslop keeps saying how they'll improve Start and I've not seen ANY improvement yet. In MONTHS. WTF?! I'll believe any of it when they actually deliver anything.
    • Ladybird Browser is no longer accepting outside contributions thanks to AI

      By David Uzondu · Posted

      Definitely not a publicity stunt lol.
    • LosslessCut 3.69

      By Copernic · Posted

      LosslessCut 3.69 by Razvan Serea LosslessCut aims to be the ultimate cross platform FFmpeg GUI for extremely fast and lossless operations on video, audio, subtitle and other related media files. The main feature is lossless trimming and cutting of video and audio files, which is great for saving space by rough-cutting your large video files taken from a video camera, GoPro, drone, etc. It lets you quickly extract the good parts from your videos and discard many gigabytes of data without doing a slow re-encode and thereby losing quality. Or you can add a music or subtitle track to your video without needing to encode. Everything is extremely fast because it does an almost direct data copy, fueled by the awesome FFmpeg which does all the grunt work. Features Lossless cutting of most video and audio formats Losslessly cut out parts of video/audio (for cutting away commercials etc.) Losslessly rearrange the order of video/audio segments Lossless merge/concatenation of arbitrary files (with identical codecs parameters, e.g. from the same camera) Lossless stream editing: Combine arbitrary tracks from multiple files (ex. add music or subtitle track to a video file) Losslessly extract all tracks from a file (extract video, audio, subtitle, attachments and other tracks from one file into separate files) Batch view for fast multi-file workflow Remux into any compatible output format Take full-resolution snapshots from videos in JPEG/PNG format Manual input of cutpoint times Apply a per-file timecode offset (and auto load timecode from file) Change rotation/orientation metadata in videos View technical data about all streams Timeline zoom and frame/keyframe jumping for accurate cutting around keyframes Saves per project cut segments to project file View FFmpeg last command log so you can modify and re-run recent commands on the command line Undo/redo Give labels to cut segments View segment details, export/import cut segments as CSV Import segments from: MP4/MKV chapters, Text file, YouTube, CSV, CUE, XML (DaVinci, Final Cut Pro) Video thumbnails and audio waveform Edit file metadata and per-stream metadata Edit per-stream disposition Cut with chapter marks Annotate segments with tags View subtitles Example lossless use cases Cut out commercials from a recorded TV show (and re-format from TS to MP4) Remove audio tracks from a file Extract music track from a video and cut it to your needs Add music to a video (or replace existing audio track) Combine audio and video tracks from separate recordings Include an external subtitle into a video Quickly change a H264/H265 MKV video to MOV or MP4 for playback on iPhone Import a list of cut times from other tool as a EDL (edit decision list, CSV) and run these cuts with LosslessCut Export a list of cut times as a CSV EDL and process these in another tool Quickly cut a file by its MP4/MKV chapters Quickly cut a YouTube video by its chapters (or music times from a comment) Change the language of a file's audio/subtitle tracks Attach cover art to videos Change author, title, GPS position, recording time of a video Fix rotation of a video that has the wrong orientation flag set Great for rotating phone videos that come out the wrong way without actually re-encoding the video. Loop a video / audio clip X times quickly without re-encoding LosslessCut 3.69.0 changelog: Add lossless cropping & aspect ratio override via bitstream and container metadata #643 Alow shifting tracks for each file (-itsoffset) #216 Add "decimate video" tool to filter away all non-keyframes #2111 Add Windows ARM 64 native build with native ffmpeg Move timecode out of timeline and make it copy-able #2592 #2691 #2800 #483 #2808 Upgrade Electron to latest Add new "opposing" align mode #2654 Add FFmpeg -hwaccel auto setting for hardware acceleration of certain operations Add API events export-start and export-complete Allow deleting track metadata #2819 Improve shift segments dialog #2839 Show keyboard shortcuts inside button tooltips in UI Warn if trying to cut with too few keyframes around cutpoint #516 #2780 #2756 (Linux) include app name in notification #2794 Pull latest translations Other notable changes: Advanced output directory selector #2101 #2115 #2755 increase max file name length to 250 (truncation) #2779 don't reset playback speed when using special playback modes #2889 preserve chapters when merging files that already have chapters don't merge adjacent segments in combineOverlappingSegments #2896 don't transfer segment name when filling gaps #2754 always scroll up to zoom in #2703 #2786 increase max keyframes to 10000 Don't bind ctrl/cmd+c by default (they interfer with copying text) Many other improvements and fixes Download: LosslessCut 3.69.0 | ARM64 | ~100.0 MB (Open Source) Links: LosslessCut Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware

  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular

  • Popular Contributors

    1. 1
      +primortal
      486
    2. 2
      PsYcHoKiLLa
      262
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!