Recommended Posts

Mines in transit... from ontario, and i'm all the way across the country :( Let's see how fast fed ex really is...

I can't believe so many people are getting it really soon or already got it and mine still says "not shipped" but "will ship by August 28th", and what I did was a pre-order! That's scandalous!

If yours was in Ontario yesterday, I should have received my copy like today because I'm in Quebec!

(btw, good that you still support the Canadiens even if you're not here anymore!)

just got mine delivered now i have to wait untill i get home to install it and test it out. i have read the documentation several times over (even though its only a simple folding card) so pumped to try it out.

I just rebooted in 64-bit mode (thinking it would do it automatically) and things are running much quicker. I'll keep testing. Here is the command to make sure it always boots in 64-bit mode (warning: check the compatible Mac list to make sure your chipset supports 64-bit):

To select the 64-bit kernel for the current startup disk, use the following command in Terminal:

sudo systemsetup -setkernelbootarchitecture x86_64

Good luck!

*Few software incompatibilities but nothing too bad yet.

Is your hard drive quite full? It may be Spotlight re-indexing, or your cache re-loading, or something.

I have a 500GB hard drive and only the space for the OS, iLife and iWork are installed on the drive. I have a Windows Home Server for my files.

That doesn't account for a 2GB difference. I'm looking at the space USED, which by that math should only be about 220MB difference.

picked up mine last night at 0004 in Dubai (9pm GMT time) and the install took just about 40 mins and seems to be a lot zippier from the get go. Hard to really tell as im on an old white macbook with 2gb of memory but definatly has a better feel. Nothing results wise to back it up but as far as being smoother, I like it.

Xslimmer is available for Snow Leopard now saving me even more space on the installed programs. Tis amazing what it strips out and then it shows you if its 64 bit or 32 bit.

Now we just to wait for x64 apps to hit us

I suspect probably not. Is there a command I can use to find out? I ran a command I found here yesterday and it stated, "EMT64" so I should be good there.

You can find out if you are running in 64-bit mode by going to System Profiler (type it into spotlight) > Software section and then look for:

64-bit Kernel and Extensions: No
That doesn't account for a 2GB difference. I'm looking at the space USED, which by that math should only be about 220MB difference.

Show me a screenshot of the Info panel of your root hard drive. How many bytes does it say are used?

My 10.6 volume shows 65,668,640,768 bytes used. This would translate to 61.15 "gigabytes" (really gibibytes) if I was in 10.5. In 10.6, that same number of bytes shows up at 65.68 gigabytes.

Show me a screenshot of the Info panel of your root hard drive. How many bytes does it say are used?

My 10.6 volume shows 65,668,640,768 bytes used. This would translate to 61.15 "gigabytes" (really gibibytes) if I was in 10.5. In 10.6, that same number of bytes shows up at 65.68 gigabytes.

Yes I know that, but no matter how you do the math 8GB at 1000 doesn't translate to 6GB at 1024, 8gb turns into 7.8GB roughly.

Still MORE than Leopard. I don't get where they say "save 6GB" from when I lost 1.8GB.

Yes I know that, but no matter how you do the math 8GB at 1000 doesn't translate to 6GB at 1024, 8gb turns into 7.8GB roughly.

Still MORE than Leopard. I don't get where they say "save 6GB" from when I lost 1.8GB.

7.45GB (8000000000/1024/1024/1024), but yeah did you install extra printer drivers?

You can find out if you are running in 64-bit mode by going to System Profiler (type it into spotlight) > Software section and then look for:

Should it be "Yes" or "No"? I ran the command and it said it worked, but mine still says No after I restarted.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • What would be the point wasting time, money and resource testing EOL operating systems?
    • expected when they force you by having to use TPM and secure boot for anti cheat crap, and lazy developers only test on windows 11.
    • The fact I need to use "Show more" like 99% of the time is so annoying. Or why I have 7-zip under 3 submenus when it could be in top. And Microslop keeps saying how they'll improve Start and I've not seen ANY improvement yet. In MONTHS. WTF?! I'll believe any of it when they actually deliver anything.
    • LosslessCut 3.69 by Razvan Serea LosslessCut aims to be the ultimate cross platform FFmpeg GUI for extremely fast and lossless operations on video, audio, subtitle and other related media files. The main feature is lossless trimming and cutting of video and audio files, which is great for saving space by rough-cutting your large video files taken from a video camera, GoPro, drone, etc. It lets you quickly extract the good parts from your videos and discard many gigabytes of data without doing a slow re-encode and thereby losing quality. Or you can add a music or subtitle track to your video without needing to encode. Everything is extremely fast because it does an almost direct data copy, fueled by the awesome FFmpeg which does all the grunt work. Features Lossless cutting of most video and audio formats Losslessly cut out parts of video/audio (for cutting away commercials etc.) Losslessly rearrange the order of video/audio segments Lossless merge/concatenation of arbitrary files (with identical codecs parameters, e.g. from the same camera) Lossless stream editing: Combine arbitrary tracks from multiple files (ex. add music or subtitle track to a video file) Losslessly extract all tracks from a file (extract video, audio, subtitle, attachments and other tracks from one file into separate files) Batch view for fast multi-file workflow Remux into any compatible output format Take full-resolution snapshots from videos in JPEG/PNG format Manual input of cutpoint times Apply a per-file timecode offset (and auto load timecode from file) Change rotation/orientation metadata in videos View technical data about all streams Timeline zoom and frame/keyframe jumping for accurate cutting around keyframes Saves per project cut segments to project file View FFmpeg last command log so you can modify and re-run recent commands on the command line Undo/redo Give labels to cut segments View segment details, export/import cut segments as CSV Import segments from: MP4/MKV chapters, Text file, YouTube, CSV, CUE, XML (DaVinci, Final Cut Pro) Video thumbnails and audio waveform Edit file metadata and per-stream metadata Edit per-stream disposition Cut with chapter marks Annotate segments with tags View subtitles Example lossless use cases Cut out commercials from a recorded TV show (and re-format from TS to MP4) Remove audio tracks from a file Extract music track from a video and cut it to your needs Add music to a video (or replace existing audio track) Combine audio and video tracks from separate recordings Include an external subtitle into a video Quickly change a H264/H265 MKV video to MOV or MP4 for playback on iPhone Import a list of cut times from other tool as a EDL (edit decision list, CSV) and run these cuts with LosslessCut Export a list of cut times as a CSV EDL and process these in another tool Quickly cut a file by its MP4/MKV chapters Quickly cut a YouTube video by its chapters (or music times from a comment) Change the language of a file's audio/subtitle tracks Attach cover art to videos Change author, title, GPS position, recording time of a video Fix rotation of a video that has the wrong orientation flag set Great for rotating phone videos that come out the wrong way without actually re-encoding the video. Loop a video / audio clip X times quickly without re-encoding LosslessCut 3.69.0 changelog: Add lossless cropping & aspect ratio override via bitstream and container metadata #643 Alow shifting tracks for each file (-itsoffset) #216 Add "decimate video" tool to filter away all non-keyframes #2111 Add Windows ARM 64 native build with native ffmpeg Move timecode out of timeline and make it copy-able #2592 #2691 #2800 #483 #2808 Upgrade Electron to latest Add new "opposing" align mode #2654 Add FFmpeg -hwaccel auto setting for hardware acceleration of certain operations Add API events export-start and export-complete Allow deleting track metadata #2819 Improve shift segments dialog #2839 Show keyboard shortcuts inside button tooltips in UI Warn if trying to cut with too few keyframes around cutpoint #516 #2780 #2756 (Linux) include app name in notification #2794 Pull latest translations Other notable changes: Advanced output directory selector #2101 #2115 #2755 increase max file name length to 250 (truncation) #2779 don't reset playback speed when using special playback modes #2889 preserve chapters when merging files that already have chapters don't merge adjacent segments in combineOverlappingSegments #2896 don't transfer segment name when filling gaps #2754 always scroll up to zoom in #2703 #2786 increase max keyframes to 10000 Don't bind ctrl/cmd+c by default (they interfer with copying text) Many other improvements and fixes Download: LosslessCut 3.69.0 | ARM64 | ~100.0 MB (Open Source) Links: LosslessCut Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      486
    2. 2
      PsYcHoKiLLa
      262
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!