Recommended Posts

I read this but then some sites are saying it's a hoax. Any thoughts?

Vista can boot faster on a multi-core processor - hoax

Sun, 2007-09-09 11:24 ? admiHoaxb>

The following hoax is making the rounds. The truth is that the setting you're encouraged to change should in all normal cases be left to automatic. The following instructions are believed to be pure snake oil, but they are repeated here, just in case you want to test them anyway.Instructionsb>

This hint is only useful if your computer has more than one processor core. Modern processors that have two, four, or more cores can benefit from this.

A few people have mentioned that with the tweak, Windows Mail starts instantly, as opposed to needing several seconds before. This is unexpected, because it shouldn't have anything to do with booting. If anybody can confirm or even explain this, please add a comment below.Warningb>

This is not for the faint-hearted. Some users have experienced various problems after applying this tweak. On some computers an activation was required. Also if you're using Bitlocker, you'll want to make sure that you've got access to the BDE FEK file or the recovery password. When you reboot after applying this tweak, it will trigger the BDE boot protection.Step by step tweak instructionsb>

By default, Vista boots only from one core. To use more cores already at boot time, you have to change a manual setting as follows.

  1. Click on: [start]
  2. Click on: Run...
  3. Type in: msconfig
  4. Click on: [OK]
  5. Click on the tab: Boot
  6. Adjust the number of cores to the number your processor actually has.
  7. Click on: [OK]

The next time you boot, Windows Defender may try to block msconfig, which was trying to run to tell you that you had made some changes. Msconfig always throws a UAC (User Access Control) prompt and this causes it to be blocked. Right click on the Blocked Program icon in the system tray (normally lower right) and run the blocked program. Put a tick in the box to not show you this again.

The speedup may not be overwhelming, as much of the boot process is disk-bound, but I guess we gladly take what we can get for free.User result statisticsb>

If you decide to try this anyway, please see the results of others and report your own results here. If you don't want to vote right now, but just want to look at the results, click below, then click on the Results tab.

  1. Speed
  2. Problems

Source through Gizmodo

Link to comment
https://www.neowin.net/forum/topic/645389-speed-up-vista-boot/
Share on other sites

Well, some people are reporting faster boot up, although it could just as well be a placebo effect. Even the site I linked doesn't really debunk it, just gets people's opinion of it.

Mine is on 24/7 since I remote in and am usually doing something on it.

  • 2 months later...

this is bogus... the steps above simply sets the /NUMPROC flag within the boot.ini file.

As Evolution already posted, the /NUMPROC flag is a way to limit Windows to a certain number of the available processors. If your system had 2 processors, you could set the flag as follows /NUMPROC=1 and Windows wouldn't utilize the second processor.

This option ( /numproc in boot.ini ) is only there to test for defective CPU's.

Disable a CPU at boot time to see if it's defective.

On boot, when the kernel is loaded, Windows always uses all the available CPU's in your system.

Only a very short time during kernel initialization is your computer only using 1 CPU (when you have more available that is..).

  • 3 weeks later...

This "tweak" doesn't necessary speed up boot process. I've actually done it before, learned about it a long time ago, and when I try to enter into Safe Mode, the screen loads EXTREMELY slow.

To explain it better: how do you read? (English) You look at each word from left to right, once you reach the end of a line you move on to the next line and start off again from the left and move your way to the right.

It does this when loading Safe Mode; "reading" each file executed for Safe Mode, and that takes about 20 minutes to finish when it is usually instantly under one core.

  • 2 weeks later...

same as other guys here, i only reboot when necassery by updates or so, when i leave the computer i hibernate and only go to sleep mode when i go for 2-3 hours max to save power, and because it's for some reason sluggish if i wake it after that

same as other guys here, i only reboot when necassery by updates or so, when i leave the computer i hibernate and only go to sleep mode when i go for 2-3 hours max to save power, and because it's for some reason sluggish if i wake it after that

Hey I noticed that as well, especially on XP. Waking up from sleep mode makes the computer sluggish. I wonder why that happens?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • DriversCloud 12.1.6 by Razvan Serea With DriversCloud (formerly My-Config.com), you can explore your computer easily, safely and free. The application quickly scans your PC and identifies the hardware and software components. DriversCloud then establishes a list of the different drivers compatible with your OS and hardware. Download the drivers needed for the proper functioning of your computer. To detect your drivers, DriversCloud also displays a detailed summary of your hardware and software configuration, analyzes your BSOD, monitors in real-time your PC voltages and temperatures and lets you share your configuration online. Once the hardware components have been detected, you will be able to obtain with just a few clicks the latest drivers corresponding to the identified hardware. You can record your configuration on the site for free, and can get the corresponding URL to post the configuration to technical forums, e-mail and social networks. You can also download the detection result (the configuration) as a PDF file. To protect the user's privacy and data confidentiality, a 4-level confidentiality system was created that filters the XML marks and gives control to the user. The default level can be modified in the preferences. Using the maximum level will prevent the user from publishing his configuration and generating a corresponding PDF file. In non-connected mode, each XML configuration is stored on the server for one day (for practical reasons). However, you are given the opportunity to manually delete it. Created in 2004, and continually improved, My-Config.com has established itself on the web as a free service to PC users running Windows and Linux operating systems. The service is designed to work with the most common Internet browsers (Edge, Firefox, Chrome, Safari). Download: DriversCloud 64-bit | 20.0 MB (Freeware) Download: DriversCloud 32-bit | 18.9 MB Link: DriversCloud Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Ocenaudio 3.19.3 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.3 changelog: Fixes issues with MP4 files with more than 8 channels Fixes incorrect VBR detection for some CBR MP3 files Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      144
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      75
  • Tell a friend

    Love Neowin? Tell a friend!