Recommended Posts

I read this but then some sites are saying it's a hoax. Any thoughts?

Vista can boot faster on a multi-core processor - hoax

Sun, 2007-09-09 11:24 ? admiHoaxb>

The following hoax is making the rounds. The truth is that the setting you're encouraged to change should in all normal cases be left to automatic. The following instructions are believed to be pure snake oil, but they are repeated here, just in case you want to test them anyway.Instructionsb>

This hint is only useful if your computer has more than one processor core. Modern processors that have two, four, or more cores can benefit from this.

A few people have mentioned that with the tweak, Windows Mail starts instantly, as opposed to needing several seconds before. This is unexpected, because it shouldn't have anything to do with booting. If anybody can confirm or even explain this, please add a comment below.Warningb>

This is not for the faint-hearted. Some users have experienced various problems after applying this tweak. On some computers an activation was required. Also if you're using Bitlocker, you'll want to make sure that you've got access to the BDE FEK file or the recovery password. When you reboot after applying this tweak, it will trigger the BDE boot protection.Step by step tweak instructionsb>

By default, Vista boots only from one core. To use more cores already at boot time, you have to change a manual setting as follows.

  1. Click on: [start]
  2. Click on: Run...
  3. Type in: msconfig
  4. Click on: [OK]
  5. Click on the tab: Boot
  6. Adjust the number of cores to the number your processor actually has.
  7. Click on: [OK]

The next time you boot, Windows Defender may try to block msconfig, which was trying to run to tell you that you had made some changes. Msconfig always throws a UAC (User Access Control) prompt and this causes it to be blocked. Right click on the Blocked Program icon in the system tray (normally lower right) and run the blocked program. Put a tick in the box to not show you this again.

The speedup may not be overwhelming, as much of the boot process is disk-bound, but I guess we gladly take what we can get for free.User result statisticsb>

If you decide to try this anyway, please see the results of others and report your own results here. If you don't want to vote right now, but just want to look at the results, click below, then click on the Results tab.

  1. Speed
  2. Problems

Source through Gizmodo

Link to comment
https://www.neowin.net/forum/topic/645389-speed-up-vista-boot/
Share on other sites

Well, some people are reporting faster boot up, although it could just as well be a placebo effect. Even the site I linked doesn't really debunk it, just gets people's opinion of it.

Mine is on 24/7 since I remote in and am usually doing something on it.

  • 2 months later...

this is bogus... the steps above simply sets the /NUMPROC flag within the boot.ini file.

As Evolution already posted, the /NUMPROC flag is a way to limit Windows to a certain number of the available processors. If your system had 2 processors, you could set the flag as follows /NUMPROC=1 and Windows wouldn't utilize the second processor.

This option ( /numproc in boot.ini ) is only there to test for defective CPU's.

Disable a CPU at boot time to see if it's defective.

On boot, when the kernel is loaded, Windows always uses all the available CPU's in your system.

Only a very short time during kernel initialization is your computer only using 1 CPU (when you have more available that is..).

  • 3 weeks later...

This "tweak" doesn't necessary speed up boot process. I've actually done it before, learned about it a long time ago, and when I try to enter into Safe Mode, the screen loads EXTREMELY slow.

To explain it better: how do you read? (English) You look at each word from left to right, once you reach the end of a line you move on to the next line and start off again from the left and move your way to the right.

It does this when loading Safe Mode; "reading" each file executed for Safe Mode, and that takes about 20 minutes to finish when it is usually instantly under one core.

  • 2 weeks later...

same as other guys here, i only reboot when necassery by updates or so, when i leave the computer i hibernate and only go to sleep mode when i go for 2-3 hours max to save power, and because it's for some reason sluggish if i wake it after that

same as other guys here, i only reboot when necassery by updates or so, when i leave the computer i hibernate and only go to sleep mode when i go for 2-3 hours max to save power, and because it's for some reason sluggish if i wake it after that

Hey I noticed that as well, especially on XP. Waking up from sleep mode makes the computer sluggish. I wonder why that happens?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • eh I'll wait for the June 2026 MVS ISO downloads which should be coming out next Tuesday June 16 and possibly contain build 8655 instead of 8653
    • read this recent topic in another forum: https://www.askwoody.com/forums/topic/still-on-win-10-and-happy-to-be-there/ some people are happy sticking with Win10
    • Cooler Master MasterFrame 600 PC case is now 33% off on Amazon by Ivan Jenic The Cooler Master MasterFrame 600 is currently $109.99 on Amazon, down from its original $164.99 list price. That's 33% off and $55 saved on this premium aluminum mid-tower case with a modular design. If you're upgrading your PC case and want something that doesn't force you into a rigid layout, the MasterFrame 600 is worth a look. The case is built around the Cooler Master's FreeForm 2.0 platform, which lets you reconfigure the internal structure according to your hardware. Magnetic side panels allow for straightforward adjustments, and the case supports everything from Mini-ITX to E-ATX motherboards without compromise. There's also generous cooling headroom. Four pre-installed PWM fans handle airflow out of the box. GPU clearance goes up to 410mm, and the case supports radiators up to 420mm with room for three simultaneously. Truth be told, this might not be the prettiest case on the market, but it’s highly functional. The aluminum construction keeps the whole thing lightweight despite its size, and the finish looks noticeably better than the plastic mid-towers competing at this price point. If you want a serious, flexible case that prioritizes function over flashy aesthetics like RGB lighting, the MasterFrame 600 delivers at a reasonable price. Cooler Master MasterFrame 600 - $109.99 | 33% off on Amazon This Amazon deal is US-specific and not available in other regions unless specified. This is a first-party seller link (at the time of article publishing); ensure that you also purchase from a first-party seller link only. If you don't like it or want to look at more options, check out the previous deals that we have covered, OR you can also visit Amazon US deals page. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • DK, I don't use the extended channel, I'm always on the latest release.
  • Recent Achievements

    • Rookie
      restore went up a rank
      Rookie
    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      155
    4. 4
      ATLien_0
      82
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!