Recommended Posts

I read this but then some sites are saying it's a hoax. Any thoughts?

Vista can boot faster on a multi-core processor - hoax

Sun, 2007-09-09 11:24 ? admiHoaxb>

The following hoax is making the rounds. The truth is that the setting you're encouraged to change should in all normal cases be left to automatic. The following instructions are believed to be pure snake oil, but they are repeated here, just in case you want to test them anyway.Instructionsb>

This hint is only useful if your computer has more than one processor core. Modern processors that have two, four, or more cores can benefit from this.

A few people have mentioned that with the tweak, Windows Mail starts instantly, as opposed to needing several seconds before. This is unexpected, because it shouldn't have anything to do with booting. If anybody can confirm or even explain this, please add a comment below.Warningb>

This is not for the faint-hearted. Some users have experienced various problems after applying this tweak. On some computers an activation was required. Also if you're using Bitlocker, you'll want to make sure that you've got access to the BDE FEK file or the recovery password. When you reboot after applying this tweak, it will trigger the BDE boot protection.Step by step tweak instructionsb>

By default, Vista boots only from one core. To use more cores already at boot time, you have to change a manual setting as follows.

  1. Click on: [start]
  2. Click on: Run...
  3. Type in: msconfig
  4. Click on: [OK]
  5. Click on the tab: Boot
  6. Adjust the number of cores to the number your processor actually has.
  7. Click on: [OK]

The next time you boot, Windows Defender may try to block msconfig, which was trying to run to tell you that you had made some changes. Msconfig always throws a UAC (User Access Control) prompt and this causes it to be blocked. Right click on the Blocked Program icon in the system tray (normally lower right) and run the blocked program. Put a tick in the box to not show you this again.

The speedup may not be overwhelming, as much of the boot process is disk-bound, but I guess we gladly take what we can get for free.User result statisticsb>

If you decide to try this anyway, please see the results of others and report your own results here. If you don't want to vote right now, but just want to look at the results, click below, then click on the Results tab.

  1. Speed
  2. Problems

Source through Gizmodo

Link to comment
https://www.neowin.net/forum/topic/645389-speed-up-vista-boot/
Share on other sites

Well, some people are reporting faster boot up, although it could just as well be a placebo effect. Even the site I linked doesn't really debunk it, just gets people's opinion of it.

Mine is on 24/7 since I remote in and am usually doing something on it.

  • 2 months later...

this is bogus... the steps above simply sets the /NUMPROC flag within the boot.ini file.

As Evolution already posted, the /NUMPROC flag is a way to limit Windows to a certain number of the available processors. If your system had 2 processors, you could set the flag as follows /NUMPROC=1 and Windows wouldn't utilize the second processor.

This option ( /numproc in boot.ini ) is only there to test for defective CPU's.

Disable a CPU at boot time to see if it's defective.

On boot, when the kernel is loaded, Windows always uses all the available CPU's in your system.

Only a very short time during kernel initialization is your computer only using 1 CPU (when you have more available that is..).

  • 3 weeks later...

This "tweak" doesn't necessary speed up boot process. I've actually done it before, learned about it a long time ago, and when I try to enter into Safe Mode, the screen loads EXTREMELY slow.

To explain it better: how do you read? (English) You look at each word from left to right, once you reach the end of a line you move on to the next line and start off again from the left and move your way to the right.

It does this when loading Safe Mode; "reading" each file executed for Safe Mode, and that takes about 20 minutes to finish when it is usually instantly under one core.

  • 2 weeks later...

same as other guys here, i only reboot when necassery by updates or so, when i leave the computer i hibernate and only go to sleep mode when i go for 2-3 hours max to save power, and because it's for some reason sluggish if i wake it after that

same as other guys here, i only reboot when necassery by updates or so, when i leave the computer i hibernate and only go to sleep mode when i go for 2-3 hours max to save power, and because it's for some reason sluggish if i wake it after that

Hey I noticed that as well, especially on XP. Waking up from sleep mode makes the computer sluggish. I wonder why that happens?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, It would appear so, according to https://finance.yahoo.com/news/how-to-hide-your-home-on-google-maps-apple-maps-204146687.html. Regards, Aryeh Goretsky      
    • Hello, The Nvidia Founders Edition 3080 video card is approximately six years old, correct? Have you looked into whether replacement fans are available for it? Perhaps replacing those will improve cooling, especially when combined with cleaning the card's heatsink and replacing the thermal interface materials. Regards, Aryeh Goretsky  
    • Hello, While ~104 GB of space may seem generous (at least compared to other e-readers which have 8-32GB), I feel at this price point the device should have a Micro SDXC card slot for expansion, particularly if it allows audio books to be installed and played. I hope to see more reviews of 6" phone-sized e-readers on Neowin in the future. It will be interesting to see how they compare. Regards, Aryeh Goretsky
    • Sandboxie Plus 1.17.8 / Classic 5.72.8 by Razvan Serea Run programs in a sandbox to prevent malware from making permanent changes to your PC. Sandboxie allows you to run your browser, or any other program, so that all changes that result from the usage are kept in a sandbox environment, which can then be deleted later. Sandboxie is a sandbox-based isolation software for 32- and 64-bit Windows NT-based operating systems. It is being developed by David Xanatos since it became open source, before that it was developed by Sophos (which acquired it from Invincea, which acquired it earlier from the original author Ronen Tzur). It creates a sandbox-like isolated operating environment in which applications can be run or installed without permanently modifying the local or mapped drive. An isolated virtual environment allows controlled testing of untrusted programs and web surfing. Sandboxie is available in two flavors Plus and Classic. Both have the same core components, this means they have the same level of security and compatibility. What's different is the user interface the Plus build has a modern Qt based UI which supports all new features that have been added since the project went open source. The Classic build has the old no longer developed MFC based UI, hence it lacks support for modern features, these features can however still be used when manually configured in the Sandboxie.ini. Sandboxie Plus 1.17.8 / Classic 5.72.8 release notes: Added added DisableCustomTitleOpt=[process,][y|n] to allow [#] sandboxie title markers on custom-titlebar windows (Delphi VCL, Qt, Electron) that were previously skipped to prevent DWM repaint CPU loops #5387 Changed updated bundled ImDisk driver to 3.0.2 #5419 Fixed fix Suppress logs for expected non-user SIDs #5422 SbieSvc.exe: SBIE2218/2219 error when run program as administrator #5417 fixed explorer.exe crashes in Application Compartment when Huorong Security is installed #5423 Download: Sandboxie Plus (64-bit) | 23.5 MB (Open Source) Download: Sandboxie Classic (64-bit) | 3.0 MB Links: Sandboxie Website | GitHub | ARM64 | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!