Find My Bottleneck


Recommended Posts

I was wondering if anyone could offer some advice for fixing an issue I've been having with my PC.

System Specifications:

Windows Vista Ultimate 64-bit (Vista Score: http://ctscreens.net/10553)

AMD Athlon 64 X2 Dual Core Processor 4800+ (CPUZ: http://ctscreens.net/10550)

DFI Lanparty Motherboard (CPUZ: http://ctscreens.net/10551)

4.00 GB memory (CPUZ: http://ctscreens.net/10552)

GeForce 7800 GTX (GPUZ: http://gpuz.techpowerup.com/08/07/03/ew8.png)

Problem:

In video games, I am experiencing terrible performance, My recent experience is limited to World of Warcraft, which should be relatively light-weight, but I've had issues with Battlefield 2, Portal, and Team Fortress 2 as well. In games, my FPS will often spike as low as 8 FPS and usually run around 20 FPS. In World of Warcraft, I can hide myself in an area with no other drawn in characters (player or non-player) and can reach much higher FPS (60 with V-Sync on or ~100 without). I first assumed the issue was with my graphics card. I made sure I was using the most up-to-date drivers and also tried using the Omega Drivers with no improvement to my FPS. I then started messing with my graphics settings. Changing from the bare minimum settings (both in game and via the nVidia control panel) to maximum settings (including moving from 1xMultisampling to 4xMultisampling) netted me only about a 5 FPS gain moving from ~20 FPS to ~25 FPS. It seems like if I can change settings that drastically with such a minimum performance change that the bottleneck must be at another part of my system.

Up until recently, I was running on Windows XP Professional 32-bit and experiencing the same issues so it isn't Operating System related. When I reformatted about two weeks ago, I decided to try out Vista to see if I would see a performance improvement by moving to a 64-Bit OS. Since then, my program installations have been pretty minimal: Drivers, Firefox, VLC, HydraIRC, Filezilla, Digsby, Notepad++, and World of Warcraft so I'm relatively certain that it is not a software issue. Since I installed Vista, I occasionally experience crashes in game when I am alt+tabbed checking a browser or something, but this is a new issue that came with Vista and could be completely unrelated to my FPS issue.

I do know that when I first built my PC (almost two and a half years ago) I did not have these issues. You'd think that I would have noticed the huge hit in FPS (dropping from 60-100 FPS down to sub-20 FPS) but I have no idea when it happened and only know that it's been an issue for at least the last six months.

Any suggestions that you all could offer would be greatly appreciated!

Edited by Andrew Tomaka
Link to comment
https://www.neowin.net/forum/topic/647064-find-my-bottleneck/
Share on other sites

Faulty component such as RAM or CPU?

Try Memtest86+.

I ran Memtest86+ ~2 weeks ago. The tests returned without any errors.

Updated drivers?

No problems in device manager?

Some of my motherboard drivers may be out of date at this exact moment since I have only let the Vista update handle this, but everything else has been updated within the last two weeks. In the past, the motherboard drivers were completely updated by hand and the issue still existed. Device Manager shows zero flags. I actually think the drivers may be the issue causing my crashing since the first time I tried Vista (~6 months ago) I was receiving stop errors relating to audio until I updated my audio driver by hand instead of letting Vista do it.

with all that hardware what PSU are you using? poor 3d performance can be due to power supplies not feeding the system with a steady strong supply. also if possible see what the quality of power is to the PSU. A generic 500W psu wont give enough amps out on the 12v rails etc not all 500W psus are all the same.

If its ok in a normal windows env but seems to struggle in "3dmode" then this could be a tell tale sign.

Seems unlikely, if it wasn't feeding enough power to the components then they wouldn't start up at all. A bad PSU may have additional noise and ripple on the lines that could kill components over time.

not neccesarily, true, cold boot uses a lot of power but levels off once machine has post. Its a

small surge, a psu struggling to supply it comfortably would still pass the cold boot, nothing saying its a bad psu as such just it cant provide enough amps on the cards rail is what im getting at matey.

"3d-mode" uses more current over time and if a psu is getting by on windows mode, it can struggle with games etc in the manner hes described.

tell tale signs are hotter than normal air exhaust from psu and sometimes a lovely smell if left long enough hehe. 3d performance can also be sporadic.

Have you tried running the usual hard disk diagnostics?

I have run the Western Digital Data LifeGuard Diagnostics tool, but only ran the Quick Test since I didn't really see it being the issue. If you think it could be related, I could run the extended test. Other than the WD Diagnostics tool, what other hard disk diagnostics are considered "usual."

with all that hardware what PSU are you using? poor 3d performance can be due to power supplies not feeding the system with a steady strong supply. also if possible see what the quality of power is to the PSU. A generic 500W psu wont give enough amps out on the 12v rails etc not all 500W psus are all the same.

If its ok in a normal windows env but seems to struggle in "3dmode" then this could be a tell tale sign.

I had considered the power supply, but don't have the hardware to test to make sure proper amps are going out. It's sort of the last thing I'm looking to explore since it pretty much means buying a new PSU blindly and hoping it's the cause so I want to exhaust other possibilities first. I did test using a second psu (at the same time, not a replacement) to power just my video card and leaving my primary psu to power the motherboard, dvd-rom, and hdd but performance remained the same. I guess that really isn't an effective test to rule out your suggestion though.

Do you have vista sp1 plus all the updates like directx 9?

Yes. SP1 and all Windows Vista updates have been installed.

slip off the side case and jot down the make and wattage rating on your psu bud and while your there jot down all the +12v, +3.3v and +5v amp ratings down and post em bud.

First is the PSU that usually runs the system solo. Second is what I've tested plugging into just the PSU. I never got much into the power side of computers so if you need more information, just ask and try to direct me to where I can find it :)

350W Turbolink

----------------------------

+12v - 12A

+5v - 35A

+3.3v - 24A

250W DTK

---------------------------

+12v - 10A

+5v - 25A

I would imagine the first is just a generic power supply. I borrowed it from a buddy when my original psu stopped functioning. The problem existed before when I was using my other (probably higher quality) psu, but I can't say whether that power supply was functioning at 100% since it eventually did die.

I don't think 350 watts is enough for your system, especially from a cheap generic power supply. And perhaps it's performance has started to decrease?

They never put out the power they say they do, far from it in many cases.

How'd you come to that conclusion?

80.7W by the 7800 GTX

http://www.xbitlabs.com/articles/video/dis...-indepth_6.html

+ 65W by the X2 4800+

http://techreport.com/articles.x/11473

?!

PSU wattage isn't the problem, it may be power output...or it may not be. Either way, it's not a particularly good unit.

How'd you come to that conclusion?

80.7W by the 7800 GTX

http://www.xbitlabs.com/articles/video/dis...-indepth_6.html

+ 65W by the X2 4800+

http://techreport.com/articles.x/11473

?!

PSU wattage isn't the problem, it may be power output...or it may not be. Either way, it's not a particularly good unit.

What about the rest of the system?

mobo, memory, drives, fans? It all adds up, right?

Not to >200 W no. A few amps here and there on different lines, but the two highest drawing components by far are the GPU and CPU. If you have enough hard drives, then one may have to worry about the load on the 12v at startup, but other than that nothing else is really considered.

I understand the PSU is awful. But I'm pretty sure the problem lies elsewhere (especially after the last couple days). I've also tested another psu (still a crappy generic with higher map rating on the rails) with exactly zero performance change.

The performance of my machine seems to declining out of control. For at least six months, I've been having these fps issues. When I made my initial post about this, I was having some ocassional issues with the system locking up (maybe 2-3 times over the course of two weeks and then two times where it seemed that 3d mode locked up but recovered after ~1 minute).

Two nights ago, it started locking up after about 5 minutes of being in the game no matter what (I've only been logging in and sitting around waiting for the crash to test and not actually playing). Running at the windows desktop has been fine (except for a single crash when I was starting up "Speed Fan" to watch temperatures - I've since been able to start Speed Fan with no issues). When in game, temperatures do not seem to be increasing out of control. After this started happening, I pulled all parts from the case and have everything sitting on top of a packaging box on my desk.

Today, I've been seeing the same crashes if I attempt to load a game. However, I also have the added symptom of having issues booting after crashes. After two separate in game crashes (about two hours apart) I ran into a string of stop errors when booting. The stop errors all seemed to be different (codes included 7f, d1, 50, 7e, 3d, and 4e).

Any suggestions for actually figuring out which piece of hardware is faulty?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Friday Windows 11 preview builds are here. Insiders in the Experimental (formerly Dev) and Beta Channel can download builds 26300.8697 and 26220.8690. My Windows11 device on the Preview Channel just got 26220.8728. My guess is this build is a nightly update from 26220.8690.
    • Traffic has a surprisingly unexpected impact on your surroundings by Sayan Sen Image by Radik 2707 via Pexels A collaborative study by researchers from several Israeli institutions found that everyday pollution from traffic and industrial activity measurably changed the atmospheric electric field over the Tel Aviv metropolitan area, providing new evidence of how human activity can influence the lower atmosphere. The research was led by Dr. Roy Yaniv of the Hebrew University of Jerusalem and the Gertner Institute at Sheba Medical Center, Dr. Assaf Hochman of the Fredy & Nadine Herrmann Institute of Earth Sciences at the Hebrew University, and Prof. Yoav Yair of Reichman University. The study also involved Itay Froomer, a student from Hadera High School and the Israeli Museum of Medicine and Science (Technoda), who carried out the work as part of the Ministry of Education's 5-unit physics research track. The researchers focused on the atmospheric electric field under fair-weather conditions. Even in the absence of storms, a weak electric field naturally exists between Earth's surface and the atmosphere. One of the main ways scientists measure this field is through the Potential Gradient (PG), which is the inverse of the vertical component of the electric field. PG is a key part of the global electric circuit, a planet-wide system of electrical currents maintained by thunderstorms and electrified clouds around the world. Scientists have long known that the atmospheric electric field can be influenced by factors ranging from large-scale atmospheric processes to local weather conditions such as dust, fog and clouds. Human-made pollution is also known to play a role, but understanding exactly how urban emissions affect the electric field close to the ground has remained an area of ongoing research. To investigate this relationship, the team analyzed measurements from a newly installed electric field mill, an instrument used to continuously monitor the strength of the atmospheric electric field. The instrument was installed at the Center for Technological Education (Roter House) in Holon and became operational in August 2024. It was funded by Israel's Ministry of Education and the Holon municipality. The electric field mill forms part of a broader monitoring network that includes nearby meteorological stations and air-quality monitoring sites. This allowed researchers to compare electric field measurements with detailed weather data and pollution records to better understand what was driving changes in the Potential Gradient. The study focused on two major urban pollutants: fine particulate matter (PM2.5) and nitrogen oxides (NOx), both commonly produced by vehicle traffic and industrial activity. PM2.5 refers to microscopic airborne particles small enough to remain suspended in the atmosphere for extended periods, while NOx is a group of gases released during fuel combustion. Researchers examined daily, weekly and seasonal patterns in the atmospheric electric field and compared them with changes in pollutant concentrations. Their analysis revealed a clear relationship between NOx levels and changes in the Potential Gradient, particularly during morning and evening rush hours when traffic emissions were at their highest. “What we observe is a direct physical link between emission peaks and electrical variability,” explained Dr. Roy Yaniv. “NOx reduces atmospheric conductivity very quickly, so the electric field responds almost instantaneously during traffic rush hours.” Atmospheric conductivity describes how easily electrical charges move through the air. According to the researchers, nitrogen oxides rapidly alter this conductivity, causing a near-immediate response in the electric field. PM2.5, however, was associated with a delayed response. The researchers attributed this difference to the particles' longer atmospheric residence time, meaning they remain in the atmosphere for longer periods, as well as their different microphysical interactions with surrounding air and atmospheric components. The study also identified a pronounced "weekend effect." In Israel, traffic volumes and some industrial activity decline significantly on Fridays and Saturdays. During these periods, concentrations of both NOx and PM2.5 dropped, and corresponding changes were observed in the atmospheric electric field. “The weekend signal demonstrates just how sensitive the electric field is to changes in human activity,” the researchers noted. “When emissions decline, the electrical environment adjusts at once, providing a high-resolution indicator of urban atmospheric conditions.” The findings showed that pollution levels can influence not only the chemical composition of the atmosphere but also its electrical properties. Researchers said the results strengthened the case for using atmospheric electricity as an additional tool for environmental monitoring, particularly in densely populated urban areas where anthropogenic, or human-caused, influences are most pronounced. The study also pointed to potential public health applications. By combining air-quality measurements with observations of atmospheric electricity, researchers said they could gain a more complete picture of how urban atmospheric conditions change over time. “Integrating air-quality data with electric-field measurements gives us a clearer picture of how the lower atmosphere evolves moment by moment,” the researchers added. “It’s a framework that can support both scientific insight and practical environmental decision-making.” Beyond the scientific findings, the project highlighted a collaboration between universities, public institutions and secondary education. Researchers said the work demonstrated how students could take part in real-world environmental research while contributing to studies of air quality, atmospheric processes and their potential effects on society. Source: Hebrew University, ScienceDirect This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
    • We aren't even at the all-star game and Microsoft is talking about an update that will most likely be released during the World Series if not after. A lot can happen in the world between now and the 2026 World Series, including the 2026 FIFA Cup. Tell me about it again after the FIFA Cup is concluded. That should allow plenty of time to prepare for it.
    • Great, tell me when I have a "Bad Pool Caller" elsewhere not in Windoze.
    • The first improvement they need to make to audio in W11 is to add an equalizer that actually works.
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      542
    2. 2
      +Edouard
      186
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      77
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!