Am I right in thinking that..


Recommended Posts

I'm 19 and looking at getting a motorbike license. Mainly because I only transport myself to work and uni and cant really justify having a car. I have a few questions though.

Firstly, is this the correct path for getting my license?

copied from: http://members.lycos.co.uk/motobykz/Motorbiketraining.htm

You have a full car license but are under 21 or don't want to do a Direct Access Test.

Do your Compulsory Basic Training.

Ride a 125cc bike on L-plates .

Pass practical test on a 125cc bike.

You now have an (A) Standard Motorcycle License and can ride any bike up to 33bhp (25kW) and also carry a pillion passenger. After 2 years you'll be given an unrestricted full bike license allowing you to ride any bike.

What's the 'Direct Access Test'?

How much will I be looking at getting my license/test?

How much for safety gear?

What sorts of bikes am I looking at (how do i find out if they're <33bhp, is it just in the spec?)?

What brands of equipment and bikes do your recommend?

If i do eventually get a bike and a license I'm wanting one that isnt too much to handle, but still has a fairly sportish, modern style to it and DOESNT sound like those awful hairdryer mopeds all the chavs have!

I know very little about bikes and the law around them so thank you for your help :)

Link to comment
https://www.neowin.net/forum/topic/647234-am-i-right-in-thinking-that/
Share on other sites

I'm 19 and looking at getting a motorbike license. Mainly because I only transport myself to work and uni and cant really justify having a car. I have a few questions though.

Firstly, is this the correct path for getting my license?

copied from: http://members.lycos.co.uk/motobykz/Motorbiketraining.htm

What's the 'Direct Access Test'?

How much will I be looking at getting my license/test?

How much for safety gear?

What sorts of bikes am I looking at (how do i find out if they're <33bhp, is it just in the spec?)?

What brands of equipment and bikes do your recommend?

If i do eventually get a bike and a license I'm wanting one that isnt too much to handle, but still has a fairly sportish, modern style to it and DOESNT sound like those awful hairdryer mopeds all the chavs have!

I know very little about bikes and the law around them so thank you for your help :)

http://www.theinternetbikeshop.com/store/c...sp?idProduct=74

thanks metallithrax. Thats the sort of bike I would be looking at.

Found some stuff on the DVLA website. Might go find a local place to learn to ride!

Direct and accelerated access

Riders age 21 or over, or those who reach 21 before their two year restriction ends, have other options.

Direct access

After taking CBT and the theory test, the practical test may be taken on a motorcycle with a power output of at least 35kW. A pass allows you to ride any size of bike. All or part of the CBT course may be taken on either a learner bike or a large bike. You may practice for the practical test on bikes larger than the learner bike specification provided:

* you are accompanied at all times by an approved instructor on another bike and in radio contact

* you wear fluorescent or reflective clothing and follow all other provisional licence restrictions

Accelerated access

Riders who reach the age of 21, while still within the two year period where they are restricted to maximum 25 kW machines, but who wish to ride larger bikes need to pass a further test on a motorcycle of at least 35 kW. They may practice on bikes over 25 kW under the same practice conditions for direct access riders. You will revert to learner status while practicing (on a motorcycle greater than 25 kW) although test failure will not affect your existing licence.

You can also if you pass on the 125cc ride upto a 600cc bike with a restrictor kit fitted which will limit the power to 33bhp. This includes bikes like the Fazer 600 CBR 600 and the ZX-6 ( I passed through a DAS course backend of last year and am currently riding a CBR-600 which is very easy to ride!) Although the Kawasaki 250 Ninja come highly rated from what i have read for beginners.

You could look at manufacturers web sites and look at the spec it will tell you the power output and also with the bigger bikes if restricter kits are available.

I think the CBT is around ?100 pounds, Then you would need to pass the bike test on a 125cc to be able to ride without L plates, but your local rider school should be able to give you advice and may even offer a free evaluation session to see how much training they think you need.

Bike Kit is personal preference, How much do you want to spend. Though with helmets, dont buy the cheapest one or the first one you try, i made that mistake and it was really painfull after a while. Go in to a local bike shop and try on lots of different makes, Firms like Shoei & Arai do offer custom fitting when you buy the helmet but they are expensive!!

But if you do take the test for a cat A licence you won't regret it. (Just get it done before october before the rules on the test change and it becomes sooooo much harder to get a full licence. Assuming your in the UK)

In the US...you can take a MSF Course (Motorcycle Safety Foundation) and it takes the whole weekend to do it and is around $180. Or you can go up the the DPS office and take a 20 question exam (after reading the book over, I didn't even do this its so easy). And once you pass it you get a permit, then you must come back the next day and have a officer follow you around and will grade you on your driving.

How much for safety gear?

19083.jpg

How much is it worth it to avoid that?

You want full leathers - at the very least a 2 piece suit, helmet, gloves, and boots.

I paid about $2700 for my riding gear:

  • Helmet: $500
  • Jacket: $800
  • Pants: $700
  • boots: $300
  • Gloves: $150
  • Alternate visor: $40
  • Ear plugs: $20 for a big-ol' box.
  • Taxes etc.

When it comes to jacket and pants or suits:

Motorcycle Leather > Motorcycle Textile > Street leater > Denim > cloth/Nothing

A good pair of boots is both comfortable and they'll protect you from the second most common injury. They aren't much more expensive than a good pair of running shoes: $150 to start or so.

Gloves a requirement: no matter how you go down, your going to put your hands down to stop the fall?it's a natural reflex?so get gear that protects them. A respectable pair of motorcycle gloves can be had for as little as $75 new. I don't recommend getting used gloves: they form to your fingers as you use them so if they're shaped to somebody else's hand then they'll be uncomfortable.

That said, you don't need to go that far. As long as you have a DOT approved helmet you'll be protected in a collision. More expensive ones tend to be lighter, quieter, or have fancier graphics but they all must meet certain minimum performance requirements. Don't buy a used helmet: you just don't know what happened to them. Head to the shop and try on as many as you can. If you can twist it at all then it's too big. Helmets with "pack down" after a week or two of riding and fit much closer and more comfortably as the padding adjusts to the shape of your head. A reasonable price is about $150 to start. Make sure you get a clear visor if you only have one. Full-face helmets are pretty much the only way to go IMO. Protection from rocks/birds/bugs/etc. is worth it, and they'll keep your face from being ground away on pavement when you go down.

1 piece suits offer the best crash performance but they're less convinient than a 2 piece. Unless you're a very active track rider a 2 piece suit that joins at the waist will perform just fine in all but the most extreme crashes. Gear should fit tight, like a wet-suit: if it moves around not only do you have it billowing when you run down the road, it's also more likely to tear in a crash or rash you when it twists. It should also be comfortable and not restrictive. There's a bike shop around here that sounds "new-enough" race suits for <$350. If you can find one that fits you, it's a great way to save money. A good quality suit should start about $500 and can go as high as $2000.

Make sure you get something with elbow, shoulder, and back shin, and knee protectors. Not only do they protect you from crashes, they also take the sting out of bugs, rocks, and whatever else you run in to.

You can get a good set of riding gear for about $800-1000, spending more just makes it look and feel better.

I'm with evn, full leathers or a 2-piece leather suit is the way to go...especially for the way I ride around corners... :laugh:

I'd love to have either, but right now I can only afford my textile jacket, boots, gloves & helmet....when I get the funds I'm going to get a race suit or a 2-piece leather suit though. (and I ride mostly street but still will wear it).

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      590
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!