• 0

unRARing files fails at random


Question

Followup thread: https://www.neowin.net/forum/index.php?showtopic=649378

Say I have the following archive files:

file.r00

file.r01

file.r02

file.r03

If I try and unRAR them, it will fail at random, citing corrupted files. It may happen on r01, it might happen on r02, etc. It's completely random.

The same set of files will successfully unRAR without errors at times. Totally random!

Vista Business 32-bit

WinRAR 3.71

Please help, this is bloody annoying, and disconcerting.

Edited by Turbonium
Link to comment
https://www.neowin.net/forum/topic/647582-unraring-files-fails-at-random/
Share on other sites

18 answers to this question

Recommended Posts

  • 0

If possible, you should try to test the files on a different machine to make sure nothing is wrong with them. Judging from the fact that they successfully decompressed at least once, the files themselves are probably fine though. If the same thing happens on another box,, then you know something's not right with the files.

Aside from that, my first guess would be that your RAM may be dying. I have had similar problems when I pushed an overclock a bit too far. You can test your RAM with Memtest+ I'd let it run overnight if possible, but if you want to test right away let it do at least a full pass or two. It's been my experience that if memory fails in Memtest it fails pretty early on. I know this is not always the case, though.

That's all I can think of off the top of my head. I am sure someone else can provide additional insight.

Hope this helps!

  • 0
  Turbonium said:
Tested memory and it's fine.

Did SCANDISK and it's fine.

Files unRARed without issue on another machine.

Just tried it again on the problem machine, and it magically worked.

Truly random.

bump

Anyone have any clue? I just tried unRARing the same file again and it failed at 66%

It unRARed without issues two days ago.

I'd be asking this on a WinRAR forum, but I can't find an official one.

  • 0
  dt said:
Try using 7zip and see what happens.

Tried it, didn't work either.

What's peculiar is that it is not failing at the same location everytime (which is different than last time)... around 2% on both WinRAR and 7Zip.

The RAR files are currently stored on an external drive by the way. It seems like every time I move it or something, it behaves differently. It was unpackaging just fine a few hours ago!

And this is where it gets REALLY weird:

I've been trying to figure out the source of random crashes I've been getting for months now (BSODs, sometimes accompanied by automated scandisks). As part of my Debugging Tools install, I downloaded a Windows Symbol Package from here: http://www.microsoft.com/whdc/DevTools/Deb.../symbolpkg.mspx

When I tried to unpackage the CAB files (self-extracting), it would always complain about corrupt files about halfway through. I tried extracting it with WinRAR, and same error, also at 50%. I tried it with 7Zip and it worked!

This is so weird, I really don't know what the problem is. It's like my entire system can't unpackage anything reliably, regardless of the files, or the source drive, or the application being used.

EDIT:

Alright, so I just tried unRARing the original problem files again, and they're working magically, when literally 10 seconds ago they weren't!

And just to clarify: this sort of thing happens with ANY sort of archive file being extracted with this system. RARs, ZIPs, and self-extracting files, with either winRAR or 7Zip, and on any hard drive, internal or external.

The issue is not the files themselves.

  • 0

I ran some more Vista memory tests (5 passes Extended), and it still came out clean.

Attempted to unpackage some CAB files and it would always report corrupt files. I tried doing yet another SCANDISK and retried extracting the CAB files and it worked.

Everything seems to point towards a bad file system. The Event Viewer shows 17 Ntfs errors within the last 2 months:

"The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume OS."

(I only found out about these by actually opening the Event Viewer - it never really gave me a warning on screen)

Furthermore, using dumpchk.exe, some (though not all) of my BSOD minidumps report the following:

"Probably caused by : Ntfs.sys ( Ntfs!NtfsPagingFileIo+138 )"

I accessed my disk's SMART data and everything is operationally sound.

What do you guys think? I've ran SCANDISK probably 6 times in the past 2 months, with half the time it being forced by the OS on a BSOD reboot.

Is it a physical fault with the disk? Corrupted MFT? Corrupt OS install? Something else maybe?

Edited by Turbonium
  • 0

For what it's worth, here are HD Tach Extended Test results (ran in XP SP2 compatibility mode):

slow.jpg

Seems hella slow to me, though it may just be a result of running compatibility mode, or the fact that I've been adding/deleting GBs of files over the past day without a defrag (current freespace on disk is ~13GB, was <1GB about 24 hours ago before I moved some files over to an external).

EDIT: My bad, but perhaps notebook HDDs are supposed to be this slow. If so, disregard the HD Tach info. Was just trying to use it as evidence for a potentially failing HDD.

  • 0
  kryten said:
I didn't read if you were overclocking anything. If you are overclocking anything, knock it off!!! Today's hardware is just fine at stock speeds. If not, then, well...we'll have to look elsewhere.

I don't overclock, and if I did, I would have enough sense to set it back to default before I come here to waste your time. ;)

  • 0
  kryten said:
I didn't read if you were overclocking anything. If you are overclocking anything, knock it off!!! Today's hardware is just fine at stock speeds. If not, then, well...we'll have to look elsewhere.

today's hardware is just fine with overclocked speeds. there's no reason to "knock it off"

@Turbonium - do you get these issues in safe mode? and have you tried the windows repair disc to see if it can detect anything wrong with your installation?

  • 0
  PermaSt0ne said:
@Turbonium - do you get these issues in safe mode? and have you tried the windows repair disc to see if it can detect anything wrong with your installation?

I haven't tried Safe Mode, nor the repair option.

You might want to check this out though everyone, as there's been an interesting development: https://www.neowin.net/forum/index.php?showtopic=649378

Edited by Turbonium
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Isn't the CPU used to calculate the parity for the RAID? If so, the combination of SSDs and 10GBe might make the CPU more important
    • yeah GSMA began working to enable end to end encryption between android and iphone last year and apparently a new standard was developed. apple has said that they would implement this in "future software updates" but i haven't heard anything since march, the time this was all reported on. shortly after, i read on forbes that the FBI suggests not sending texts between iphone and android because they're unencrypted. i use signal to chat with my wife but i'd rather just use messages tbh (she has an iphone), i'm not really a 3rd party guy haha
    • Well, I did not like the trailer for the project he went to work on also, but why do you think he should waste time with this… did you love the season 2? Maybe I am missing out after the crap I saw in first season ep1-3? I love the first last of us game… while not the BEST it was one of the games that I will remember for the EXPERIENCE it game me… last of us 2 was not on the same level at all and the show🤔 complete miss in my experience of the first few level
    • They're likely moving all resources to other things. Clearly Windows is not important to them.
    • Image Uploader 1.4.3 Build 5352 by Razvan Serea Image Uploader is a free and open-source program for Windows that that allows you to effortlessly upload images, screenshots, and various files to a wide array of hosting services. With its capability to capture selected screen areas, it promptly uploads content to image hosting services, while also offering the convenience of automatically copying the URL to your clipboard. Key Features of Image Uploader: Upload to Multiple Hosting Services Image Uploader supports uploading images and files to over 30 popular hosting services. Additionally, it can upload directly to your own FTP, SFTP, or WebDAV server. After upload, the tool automatically generates sharing codes in HTML, BBCode, and Markdown, with support for custom output templates tailored to your needs. Video Frame Grabbing and Screenshot Tools You can extract multiple frames from video files in a wide range of formats including AVI, MP4, MKV, WMV, and more. It supports both system-installed codecs and built-in ones. The extracted frames can be uploaded individually or compiled into a single mosaic image. It also includes screenshot capabilities for the full screen or selected regions, along with a simple image editor for annotations, highlights, and blurring. Advanced Integration and Usability Image Uploader supports drag-and-drop, clipboard monitoring, and can be accessed via Windows Explorer’s context menu. It also features URL shortening, multi-account support, reuploading, and the ability to upload images embedded in text while retaining formatting. The app is available in several languages, including English, Russian, Turkish, Korean, Arabic, and more. Image Uploader 1.4.3 Build 5352 changelog: New Features Screen Recording: Added two powerful capture methods: DirectX (Desktop Duplication API) FFmpeg-based recording Expanded Hosting Services: Added support for new file hosting platforms: TeleBox (linkbox.to) take-me-to.space ranoz.gg webshare.cz lobfile.com imgpx.com freeimghost.net radikal.cloud anonpic.org fotozavr.ru imgtr.ee thumbsnap.com 8upload.com filemail.com Others Video Uploads: Added Flickr.com support for video uploads Localization: New French translation added Context Menu: Added "File Information" option to video file context menus DPI Support: Improved support for: Screen DPI changes Mixed-DPI multi-monitor setups Improvements Disabled application window animations during screenshot/screen recording initiation Updated API and documentation Improved overall stability Bug Fixes Fixed network client error that could cause application crashes Resolved unauthorized startup registration issue Fixed upload functionality for pixeldrain.com Restored tray icon balloon notifications visibility Various minor bug fixes Download: Image Uploader 64-bit | Portable 64-bit | ~16.0 MB | (Open Source) Download: Image Uploader 32-bit | Portable 32-bit | ~15.0 MB Download: Image Uploader ARM64 | Portable ARM64 | ~11.0 MB Links: Image Uploader Home Page | Screenshot | GitHub Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      SteveJaye earned a badge
      Reacting Well
    • One Month Later
      MadMung0 earned a badge
      One Month Later
    • One Month Later
      Uranus_enjoyer earned a badge
      One Month Later
    • Week One Done
      Philsl earned a badge
      Week One Done
    • Week One Done
      Jaclidio hoy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      431
    2. 2
      ATLien_0
      156
    3. 3
      +FloatingFatMan
      148
    4. 4
      Nick H.
      64
    5. 5
      +thexfile
      62
  • Tell a friend

    Love Neowin? Tell a friend!