Recommended Posts

Hi, I have a built a water cooling system (this is a first one for me so I am a newbie when it comes to watercooling) and it dont seem to be doing the job. Here is what I have:

Thermaltake Bigwater cooling system

Nvidia 8800GT x2 (both with water blocks on them)

Asus Striker 2 Extreme mainboard

QX9650 CPU

4GB RAM 1066MHz

Problems:

1) Get bubble in one of the pipes leading from the reservoir, I can get them out but they come back after a few days

2) I dont think the pump is strong enough to pump the water around

3) The temp for CPU gets to like 65C when under loud (playing games)

So Im just wondering what could be done to solve this. Thank you

P.S. ill post the pictures in a bit

Link to comment
https://www.neowin.net/forum/topic/647593-water-cooling-help/
Share on other sites

Which Bigwater?

Did you bleed your system before starting it up? If so and you still have bubble problems...I'm thinking there might be a leak somewhere.

If you didn't bleed the system, that will affect performance as well as noise. However, even if it was bleed the Bigwater's not going to have the ability to dissipate that much heat put out by those components.

Wrt to the pump, the Bigwater's have had a reputation for having rather weak pumps...not really sure how you came to the conclusion, but it's probably correct anyhow.

EE Quad plus SLI G80's and you didn't want to spend the money and time on a real loop?

yes I had bled the system, left it over night and that got rid off the bubbles but they do come back after. What can you suggest? A better pump or a complete new system?

Well to be totally honest this is my friend's system and he had it built by someone else and I dont know what they were thinking so I am just trying to sort it out for him. I have never done a water cooling system before in my life! lol

Thanks

As gwai said, if you bled the loop and keep getting bubbles then there must be a leak somewhere. That could be partly why the temps are high but I'd probably side with it being the quality of the components and the pump. I'd check everything over again and make sure all the blocks are seated correctly and there is the right amount of thermal paste etc etc, you don't want to spend money if you don't have to. That being said, the pump on that system is pretty poor so if the latter doesn't work then I'd invest in something like a Laing DDC and possibly a bigger rad.

Edited by Brodel

It seems I only get the bubbles when it comes out from the second reservoir which includes the flow meter. I guess I can try disconnecting it and see how I get on? Also if I do get a better/bigger rad I do need it to be as quite as possible so is it worth going for the Zalman fanless tower thing?

RESERATOR-1-Plus_04_m(0).jpg

Kits generally don't offer very good performance for your money, much less the ability to dissipate the heat that system will put out. I imagine what Brodel was referring to was something along the lines of Thermochill's PA series, Swiftech's MCR's, etc.

Also, for what you're running you're going to want at least two 3?120mm rads.

Is the liquid green? or the tubing? If the coolant is, then try wrapping paper towels or something around certain points and seeing where they turn green.

The coolant stuff is green and so are the pipes.

Yeah I have done that, found out that all the air is getting from the "second" reservoir which has the flow indicator as well. I have take it out just to see and no bubbles now at all but the CPU still gets hot so I rekon I do need a new system reall or at least a bigger rad and pump!

Off topic, but isn't this a WATER cooled system? How do you have green liquid? Food coloring? Or is it some other form of heat exchange medium.

There are dyes to get certain colors, most of the time the color is added for looks but also because there are additives in there to keep it from building up algae or corrosion with mixing metals.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • These features described above are good, but far from what developers like me was eager to get. And that main feature that developers will love it`s the ability to connect to LOCAL AI models running on Ollama. So if you have a beefy spec machine you can now use your own model 100% local inside Visual Studio 2026 18.7.0
    • Microsoft Teams is getting a controversial location tracking feature that users may hate by Usama Jawad Image generated with Microsoft Copilot Earlier this year, Microsoft planned to roll out a controversial location tracking feature in Teams, but following customer feedback, it decided to delay its release. The bad news is that the company has decided to launch it later this year, but it's based on roughly the same design that was shared earlier, which means that many users still have good reason to worry. Basically, Microsoft Places and Teams have received workplace check-ins via Wi-Fi. The idea is that if an employee arrives at the office and connects to their enterprise network, their profile status indicator will show them as being present in the office. For example, if you arrive at work, open Teams on your PC, and connect to the "Studio B" company Wi-Fi network, your Teams profile will indicate that you are present in "Studio B", as shown below: Microsoft says that this feature is basically a replacement for physical workplace check-in peripherals, it reduces the need to manually update your status, and it also enables co-workers to know that you're at work so that they can coordinate in-person meetings with you. IT admins can enable this workplace check-in capability at a tenant level, and users have the ability to control whether they want to enable it or not. Of course, all of that sounds great on paper, but naturally, many Teams customers may still have concerns, as they did before. This is because it enables your reporting manager and other members of the organization to track if you are at the office, when you arrive at the office, and where you are right now. This could be problematic for people who work in what they consider to be flexible work environments or hybrid setups, and this kind of location tracking could be considered an invasion of privacy. Microsoft has tried to alleviate some of these concerns by letting users know that they can manually set their location easily, which essentially overrides workplace check-in if they feel uncomfortable with it. However, that doesn't really solve the problem because your organization could enforce a workplace policy that mandates that this feature remains enabled. The Redmond tech giant has also assured users that this capability does not store historical data and is only a real-time indicator of location. Finally, it only generates a signal when you connect to a corporate network, which means that if you are working from home and connect your PC to your personal Wi-Fi, it won't broadcast your location to your employer; you will simply be shown as "Remote". Microsoft has encouraged IT admins to prepare for this change and begin informing users so they know what to expect once it begins rolling out later this year.
    • Wow, Microsoft IS cooking lately... This only shows that they COULD improve, they just chose not to for whatever reasons. That obsession with AI was destroying them from the inside out.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      511
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      157
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      80
  • Tell a friend

    Love Neowin? Tell a friend!