Left my windows cracked...


Recommended Posts

Dry it well, vaccuum the hell out of it, and make sure it gets fresh, dry air for a few days (parking in a garage with the windows down should work if you're not in a humid environment).

You can also use carpet deodorizer powder if it still stinks, or you can't air it out. Sprinkle on, and vaccuum off in a couple of days.

Takes 15 mins to pull the carpet out. I flooded out my car the other week ago. Removed the seats, center console, and pulled the carpet. Easy job. (Y)

After all that, shop vac the water and let the carpet air dry. I'm telling you now, just vacuuming the carpet will NOT get alot of water out.

If you let it sit in there and just vaccume or spray it to get rid of the smell, it wont go away. There is material under the carpet called jude and it will stink if you don't pull the carpet.

I personally would recommend going to an Auto Detailer and having them shampoo and clean the interior of the car. They have ways of extracting any remaining water out of your seats and carpet and then cleaning them afterwards to make sure that it doesn't smell musty and moldy. It might cost you a little bit but I think it's worth it, plus your car's interior will look nice, clean, smell good, and shiny.

Febreeze!

+1

Seriously, before you try any more expensive methods; Fabreeze the $#&(^*@^ out of it! Then roll up all the windows and let the Fabreee fester. :D Then buy a new air freshner.

If you've still got the puddles, I recommend thick towels under thick books. I had a car that leaked every time it rained and I had to soak up all the water with big towels set in place by dictionaries....it wasn't pretty but it helped a lot.

The rest of the posters have really great suggestions though, this is just the most bare bones method.

Some really good responses guys! I really really appreciate it. Tomorrow is my day off so I might just go ahead and pull it out and vac the hell out of it. Thanks guys, any other suggestions are welcome. I also have Febreeze so that helps! :D

I also recommend pulling up the carpet and everything... The water that gets trapped under the carpet, inside the seat. etc will stay there for a while and cause mildew and will have that smell for a long time. Carpet is easy to lift up, take the screws out the stripping, pull the carpet up, dry it all, empty half a bottle of febreeze, let it sit a bit and wipe all excess, put carpet back down and carefully screw the strips back on (dont overtighten). Spray the entire seat and carpet with febreeze or freshener on a hot day when the car is in the sun.

Put some air fresheners under your seat after.

Some auto detail shops- actually plugin a dehumidifier and leave them in the vehicles- as well as the febreeze.

http://www.walmart.com/catalog/product.do?product_id=4532762

Or if you know where you can get the moisture absorb packets for shipping items- Sometimes you can get a 50 pack for around $30.

I'd have to disagree that removing the carpet is an easy job on a car. It may be in some vehicles, but, it's a pretty major job on a lot of cars and can require removing the seats, a fair bit of the dash, the center console, and a lot of the interior trim.

I have worked at car detailing jobs and custom interior installations. Carpet jobs are easy. Removing seats, trimming, center console is easy. All held together by screws.

This happened to me one time...

I just put down some newspaper to soak up as much water as I could, then used a shopvac to suck up the water underneath the carpet. My car still smelled like crap, so I laid down some baking soda... after a few days the smell was gone and I just vacuumed up the baking soda.

You might also try turning on the heater and setting it to blow to the floor.

Takes 15 mins to pull the carpet out. I flooded out my car the other week ago. Removed the seats, center console, and pulled the carpet. Easy job. (Y)

After all that, shop vac the water and let the carpet air dry. I'm telling you now, just vacuuming the carpet will NOT get alot of water out.

If you let it sit in there and just vaccume or spray it to get rid of the smell, it wont go away. There is material under the carpet called jude and it will stink if you don't pull the carpet.

that's the only proper way. my brother left the window open to my moms car before and it smelled horrible for a good two to three weeks.

Febreeze does wonders.... except when its 3 guys puking at the same time in your cab after you picked them up from outback steakhouse with fullbellies of booze and onion flowers...... I had to race across town to the only chevron with do it yourself detailing service.... got there too late... the funk had already set into the upholstery.... I can still smell the onion flowers.....

I have worked at car detailing jobs and custom interior installations. Carpet jobs are easy. Removing seats, trimming, center console is easy. All held together by screws.

Really? And what happens if he sets off the seatbelt pre-tensioner by accident? Nicks a wire underneath the seats?

And I'd hope by screws you mean bolts holding the seats in?

Really? And what happens if he sets off the seatbelt pre-tensioner by accident? Nicks a wire underneath the seats?

And I'd hope by screws you mean bolts holding the seats in?

Turn off the car, remove seats (bolts), unplug all wires (they wont nick, they have connectors). Don't start the car without reconnecting seat belt wire or you will ruin it. And what I meant by screws, the console is held by screws.

  • 3 weeks later...

Baking soda has to be the best odor remover out there. Cheap, environmentally safe and works far better than any febreeze type products out there. If you can get your hands on a handheld steam vac use that, then put down baking soda. The steam will kill mold and bacteria and the baking soda will remove the stink for good.

Turn off the car, remove seats (bolts), unplug all wires (they wont nick, they have connectors). Don't start the car without reconnecting seat belt wire or you will ruin it. And what I meant by screws, the console is held by screws.

I'm sorry, you can't have worked on anything modern - for a start, you need to disconnect the battery or the airbag sensors will be triggered and the airbag warning light will come on. If you accidently hit the seat belt pre-tensioner, if will be fired - even a small knock can be enough to set it off. By nicking a wire, I meant what if they did it accidently. In a few cars I have worked on, there is an exact order to do things to get the seats out.

While it's not impossible to do, or actually that difficult, it's nowhere near as easy as you make out, and should only be undertaken with the correct instructions by someone that feels they are capable of doing it.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Universal USB Installer 2.0.3.7 by Razvan Serea The Universal USB Installer (UUI) is a powerful bootable USB software tool for creating USB boot drives from ISO files, perfect for installing Linux or Windows, running live systems, or building diagnostic toolkits. This versatile ISO-to-USB software makes it easy to boot from USB and create Live USBs for Linux distributions, Windows setup installers, antivirus tools, and system diagnostic utilities. Whether you need a multisystem Windows Media Creation Tool, a Live USB Linux installer, or an all-in-one PC diagnostic toolkit, UUI offers a reliable and flexible Linux and Windows bootable USB creator. Effortlessly carry your favorite portable operating systems and essential troubleshooting and diagnostic tools on a single flash drive or USB boot stick. Take your preferred Live Linux distributions, Windows installers, recovery software, backup utilities, and diagnostic tools with you, all bootable from a single USB drive. No more juggling multiple USB sticks or complicated bootloaders, UUI consolidates everything into one flexible, multiboot solution. Using this open source USB boot maker software is easy as 123. To create a Linux or Windows bootable USB drive, you simply select your target flash drive, choose your distribution from the list, browse to the ISO file (or choose to download the ISO), and then click Create. Once finished, you should have a ready to run Live USB containing the Live operating system, Windows installation media, or system diagnostics utility, or advanced system cleaner tool you previously selected. Universal USB Installer 2.0.3.7 changelog: Expanded the distro and tool catalog with additional popular Linux ISO entries. Updated: several distro homepage and download links, including Ubuntu Unity, Garuda Linux, Arch Linux, Fedora, Manjaro, and SystemRescue. Fixed: ISOs added via drag and drop (or manually copied to the drive) are now listed in the removal dropdown alongside normally installed distros. Download: Universal USB Installer 2.0.3.7 | 19.4 MB (Open Source) Link: Universal USB Installer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You are clueless. The updates are done in the background so the next time you open Edge the updates are applied automatically. There is no need to close all your tabs. Just keep browsing like you normally do. Clearly you don't use Edge and are just one of those haters that complain for the sake of complaining.
    • I don't get this David. Can you explain it please.  
    • Microsoft is busy. Lots of changes to be released imminently for Windows server or soon. Also, lots happening for next version as well. Third party virus scanning software is being moved out of Kernel mode to avoid repeat of Crowdstrike incident. Windows Protected Mode and Windows Ready Print no longer require third party print drivers to be installed. New storage stack being developed. New NVME drivers now available for Windows Server 2025 to improve local NVME drive performance by 60+ percent. NVME-Of of fabric being worked on for next release to improve network access to NVME drives. ReFs (next file system) now has ability to boot and will become default file system in next release of Windows Server. ReFs improves on NTFS in several areas including resiliency and reliability and scalability. New update stack is being worked on to unify Windows updates, and updates for drivers and first party/3rd party application software. A stricter and more robust third-party driver certification program (ODI) is being worked on to improve performance, thermals, battery life, and reliability on modern Windows hardware by tightening how OEMs and IHVs (Intel, AMD, Qualcomm, NVIDIA, etc.) build and ship drivers. There is a tone more but too numerous to mention.
    • Now disable that stupid OneDrive backup request when Windows starts please. So unbelievably frustrating to only have “remind me later” instead of “no and never ask me again”
  • Recent Achievements

    • One Month Later
      Markus94287 earned a badge
      One Month Later
    • Week One Done
      Markus94287 earned a badge
      Week One Done
    • One Year In
      Markus94287 earned a badge
      One Year In
    • Dedicated
      truespursfan earned a badge
      Dedicated
    • Rookie
      restore went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      507
    2. 2
      +Edouard
      168
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!