Problem with Internet Explorer on Vista?

By DaDude
in Microsoft (Windows)

 Share

Recommended Posts

Veteran

DaDude

Posted
Posted

It happened once where I closed a window of internet explorer and the page I closed kept on coming up again and again in small windows on top of each other? If I close them, more just pop up quicker and quicker. I finally was able to stop it by going to 'Task Manager.' I know for sure it can't be a virus because the computer is only 3 days old, I've only been to a few sites (which are clean), and I did a virus scan and everything and everything is ok. this only happened once and never happened again so far. But I'm scared it might happen again. Why is this problem happening and what can I do to stop it? Should I change my browser to Firefox?

Grand Master

ANON86364

Posted
Posted

No that wouldn't be a virus, more like spyware. So scanning for viruses would not catch what is most likely causing this. Just because your PC is new doesn't mean that isn't enough time for your system to be exploited. Are you behind a router or at least have Windows Firewall enabled? You need to start with Spybot, AVG Anti-Spyware and whatever else you want to throw at it.

Veteran

DaDude

Posted
  • Author
Posted
?

Try a few other scans. These days, scans can miss what another will not.

Is it the same page that you tried to close that keeps coming up, or blank pages, or different pages?

The same page. I was visiting IMDB.com and was looking up an Actor. Then I closed the window and more windows kept on popping up, all of which were the same exact IMDB page.

Mentor

franzon

Posted
Posted (edited)

Typically, badly written add-ons can affect the browsing experience. RIES enables Internet Explorer 7 to recover from such situations.

To use RIES in Internet Explorer 7, follow these steps:

1. Click the Tools menu, and then click Internet Options.

2. On the Advanced tab, click Reset.

Note If you cannot start Internet Explorer 7 for some reason, use RIES from Internet Options in Control Panel.

How RIES works

RIES resets the following settings:

• Browser settings

RIES resets all user-defined browser settings to Internet Explorer 7 defaults. These settings include those that are set by installed extensions, toolbars, and other add-ons. If you have administrative credentials when you are running RIES, the corresponding computer settings are located in the HKEY_LOCAL_MACHINE registry subtree. RIES resets these settings to Internet Explorer 7 defaults. These settings include all the customizations that you can make to Internet Explorer 7 by using the Internet Options dialog box. For example, this resets security settings, privacy settings, and zone settings.

• Extensibility

All extensibility entry points that you install are prevented from running automatically. If you load extensions such as toolbars, browser extensions, and Browser Helper Objects when you start Internet Explorer 7, the extensions are disabled. Additionally, the ActiveX Opt-in state of ActiveX controls are restored.

• Browsing history

RIES clears temporary Internet files, cookies, browsing history, form data, passwords, and auto-complete data.

• Manufacturer settings

RIES restores Internet Explorer 7 customizations that are applied by the OEM in the initial package. These customizations are applied to Internet Explorer 7 by using the Internet Explorer Administration Kit (IEAK). Alternatively, these customizations are applied by using the settings that are applied by the OEM during the installation of the operating system.

http://support.microsoft.com/kb/923737/en-us

Edited by franzon
Proficient

Grope for Luna

Posted
Posted

Do you have tabbed browsing enabled? Every now and then I'll click or close a window in my IE shell (Sleipnir) and an IE window will pop up with dozens of tabs opening the same page. I think it's a deformed/malicious script loaded in the page via cross site scripting, but I can't confirm. It's happened to me 5-6 times now.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Nvidia 610.62 driver lands with big bug fixes and Empulse support

      By goretsky · Posted

      Hello, Installed here without issue. Regards, Aryeh Goretsky
    • Microsoft updates Visual Studio Code with easier language model discovery and in-app search

      By zikalify · Posted

      Microsoft updates Visual Studio Code with easier language model discovery and in-app search by Paul Hill Microsoft has released Visual Studio Code 1.125, its latest weekly release. This week, the company has focused on discovering and installing extra language models via the Marketplace; searching the web and securely browsing over remote connections without leaving VS Code; choosing how long VS Code waits before installing extension updates; and delivering managed Copilot settings through existing device management tooling. In older versions of VS Code, extensions could contribute their own model providers, but to find these extensions, you needed the right tags to search for in the Extension view. Now, the Language Models editor gives you an Install Model Providers button that opens the Extensions view, which is filtered to extensions that contribute model providers, making it easier to find and install them. Once you install a provider, its model will appear in the model picker. If you use the integrated browser much, you can now look up information without leaving VS Code by typing a query into the integrated browser’s address bar. It will use your configured search engine, the same way a standalone browser does. You can use workbench.browser.searchEngine to pick a search engine. When the browser is opened in a remote workspace, it's now possible to proxy HTTP(S) traffic via the remote connection. This allows you to connect to any ports or services that can only be accessed from the remote machine. If you read our coverage from two weeks ago about VS Code 1.123, you might have seen that extension updates have a two-hour delay as a safety measure. In this update, Microsoft is giving you the ability to configure the time of the delay. You can find it under extensions.autoUpdateDelay. Finally, with this update, admins can deliver managed GitHub Copilot settings through native device management (MDM) channels on Windows and macOS, in addition to account-based enterprise settings files. Settings delivered via MDM appear as policy-enforced in VS Code and can’t be overridden locally. Future updates will extend the supported policy keys across Copilot surfaces. You can download the update from the Visual Studio Code website now.
    • Microsoft will finally let you sign in to Edge with a Google account

      By monterxz · Posted

      "it opens up new doors for people who prefer using Edge, but cannot be bothered to configure a Microsoft account" You already have a Microsoft account if you are using Windows 11, because you can't set it up without one.
    • This is how much iPhone 18 Pro could cost after Apple's price hike confirmed

      By Hamid Ganji · Posted

      This is how much iPhone 18 Pro could cost after Apple's price hike confirmed by Hamid Ganji Image via Apple Apple CEO Tim Cook confirmed in a recent interview that the company may have to raise prices on some of its products due to the ongoing memory shortage. While he did not elaborate on the scale of the price hikes, new estimates suggest that Pro iPhone models could become significantly more expensive this fall. The Wall Street Journal and research firm TechInsights have come up with an educated estimate of how much the upcoming iPhone 18 Pro could cost after its launch in September. The estimate is based on current increases in memory and storage chip prices. For starters, the iPhone 18 Pro base model is expected to feature 12GB of RAM and 256GB of internal storage. According to TechInsights estimates, 12GB of DRAM for the iPhone 17 Pro cost Apple $39 last year. However, for the iPhone 18 Pro, the cost of the same amount of DRAM could soar to $145. Likewise, 256GB of flash storage that previously cost $13 could now cost around $51. Producing a base iPhone 17 Pro reportedly cost Apple around $582, but TechInsights estimates that the production cost of the iPhone 18 Pro could rise to $726. If Apple wants to maintain the roughly 47% profit margin it enjoys on the iPhone 17 Pro, the base price of the iPhone 18 Pro would need to reach $1,371. After standard pricing adjustments, customers could end up paying around $1,299 for the base model. However, that may not be the end of the story. As we previously reported, the iPhone 18 Pro is said to feature a variable-aperture lens, which could cost Apple at least 50% more than the current camera system. The estimated $1,299 price tag does not include the additional cost of this upgraded camera hardware. Once that expense is factored in, the base model could cost at least $1,399. A $1,399 price tag for the base iPhone 18 Pro would represent a significant increase over the current $1,099 starting price of the iPhone 17 Pro. If Apple wants to keep its upcoming iPhones competitive, it may need to accept lower profit margins.
    • Rockstar gives last-gen GTA V players free upgrades tomorrow

      By testman · Posted

      Oh man, but what if I have the PS3 version?

  • Recent Achievements

    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
    • Week One Done
      With What earned a badge
      Week One Done
    • Week One Done
      Harris Gilbert earned a badge
      Week One Done
    • One Month Later
      Vincian earned a badge
      One Month Later

  • Popular Contributors

    1. 1
      +primortal
      543
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      84
    4. 4
      ATLien_0
      64
    5. 5
      neufuse
      64
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!