Recommended Posts

Don't take the Windows Experience Index to heart. Some people use it to rank their systems, but it's just a rough estimate of how your system is going to perform. I got a 3.0 (due to my integrated gfx) but Aero still ran fine. I'd say Vista was just as responsive as XP on my laptop.

Also, make sure you get the latest drivers and windows updates and such... If you follow black viper's guide, you can dramatically reduce the footprint of Vista. Also, check your power management settings. It should be on "Balanced" on a default install, I think.

Um, why not just install Win95, its much less bloated than XP.

As we found out in the tweaking thread, there isn't much to do these days other than customization. Following silly guides like Blackvipers only cripples what you paid for, generally for no good reason.

Plus, HDD use doesn't 'hurt' the drive so its not going to fail earlier. Temperature, physical shock, and powering up/down is where your main 'wear' comes from.

Does your processor haves a single core or dual core? If it's a single core then 1.6 GHz is not good enough. Check out your "Windows Experience Index" and post the full results here. The full results are below. :)

I have a single core (Athlon64, mind you) and at 1.8 Ghz it runs Vista x64 (and Server 08 x64) just fine with 2 GB of RAM. In my WEI, my CPU is 4, and since I'm running a 64-bit OS, I'm fully utilizing the 64 bit CPU. It is very snappy and continues to get quicker with time, especially boot-up and launching the applications I used the most.

Course, maybe it's just me but Windows Server 2008 seems a bit snappier than Vista x64. But it's possible it's just my imagination.

Um, why not just install Win95, its much less bloated than XP.

As we found out in the tweaking thread, there isn't much to do these days other than customization. Following silly guides like Blackvipers only cripples what you paid for, generally for no good reason.

Plus, HDD use doesn't 'hurt' the drive so its not going to fail earlier. Temperature, physical shock, and powering up/down is where your main 'wear' comes from.

Because there are services that people don't use, so why should it take up valuable resources? It makes absolutely no sense why a service should run if you're not going to use it (unless it has dependencies)...
Um, why not just install Win95, its much less bloated than XP.

As we found out in the tweaking thread, there isn't much to do these days other than customization. Following silly guides like Blackvipers only cripples what you paid for, generally for no good reason.

Plus, HDD use doesn't 'hurt' the drive so its not going to fail earlier. Temperature, physical shock, and powering up/down is where your main 'wear' comes from.

Dashel.... how exacltly do you think the temperature rises?

Also, why would disabling services cripple Vista? Maybe in your mind it would, but I only want the core OS. If something really didn't work, couldn't I just re-enable it? I plan on monitoring my own security and backups, etc.

I made a thread a long time ago, and here was my result. Like I said, you can pretty much retain a lot of functionality and disable a lot of services to save your memory and it sped up Vista by quite a bit for me. As you can see, I got it down to 314MB of RAM use, it actually went down to 290MB. The point here is not how much memory Vista occupies, but how snappy Vista when I tweaked it and I had all the functionality.
If it stops the hard drive thrashing then it's great.

I don't get ANY hard drive thrashing in vista with no tweaks at all. After bootup superfetch goes for like 1 min, but after that the hdd led only blinks like twice every couple minutes. There's something wrong if you are getting thrashing.

I don't get ANY hard drive thrashing in vista with no tweaks at all. After bootup superfetch goes for like 1 min, but after that the hdd led only blinks like twice every couple minutes. There's something wrong if you are getting thrashing.

I don't believe you.

Search indexer, superfetch, system restore, defrag, etc would always run at the worst possible time. The hard drive light would be on solid and the computer would be to busy to process what I wanted like encoding a picture or video.

Pentium M is a single core processor and welcome to the days of 2000. You're thinking of plain processor speed is wrong. It's all about how efficient the processor is and the Pentium M was a good laptop processor in its time.

You see, I have a 3 GHz hyper threading P4 processor and it rates my processor as 4.2. The Pentium M single core will have an experience Index rating of below 3 which is not worth using Vista, unless you prefer on using Vista Basic GUI. Vista recommends Dual Core CPUs. A 1.6 GHz Dual Core CPU will have a better rating than mine. If I were you I'd stick with XP.

I have a single core (Athlon64, mind you) and at 1.8 Ghz it runs Vista x64 (and Server 08 x64) just fine with 2 GB of RAM. In my WEI, my CPU is 4, and since I'm running a 64-bit OS, I'm fully utilizing the 64 bit CPU. It is very snappy and continues to get quicker with time, especially boot-up and launching the applications I used the most.

Course, maybe it's just me but Windows Server 2008 seems a bit snappier than Vista x64. But it's possible it's just my imagination.

Does the other guy have a 64bit system? probably not. And Server 2008 as a workstation isn't worth the time and money to set it up. and Vista Ultimate has other functionallities that 2008 doesn't.

Pentium M is a single core processor and welcome to the days of 2000. You're thinking of plain processor speed is wrong. It's all about how efficient the processor is and the Pentium M was a good laptop processor in its time.

My graphics, HDD and Memory have a good rating which will help out the CPU, even though the CPU rating is a 4.2. My Vista flys. Plus I have a PC Power 750 Watt Power Supply which also give juice when needed. An no...not the juice you drink...lol

I don't believe you.

Search indexer, superfetch, system restore, defrag, etc would always run at the worst possible time. The hard drive light would be on solid and the computer would be to busy to process what I wanted like encoding a picture or video.

system restore only runs for a couple seconds after I install a program. Never have any problems with search indexer and it doesn't do much besides when you first install and add all your data. I set defrag to run at like 1:00 in the morning... Their is something wrong on your end if you are getting cosntant thrashing. I game all the time and never get thrashing or anything slowing anything down. My hdd hardly gets any more activity then in xp.

I also convert a lot of music files ect.. and don't get any of the thrashing you mention. My hdd light sits idle almost all day.

I don't get any HDD "thrashing" either. Most of the process hardgiant mentions are set to run as "Background" processes anyway. So even if they were running, I wouldn't ever notice.

Bottom line is, I haven't noticed any more HDD activity on Vista than on XP.

In the event there is heavy HDD activity, one could always open up the Reliability and Performance Monitor....

i also dont get any thrashing even though my 1.8GHZ athlon 64 is rated at 3.8.i do agree that you can speed it up a bit by turning off some of the visuals and limiting what starts up and turn off features you dont need but then again it dpends on the system,if it's older then it will help alot but if the system is say brand new from 2008 then your milage will vary.

My advice would be here;

1. run it and tweak it, disable services such as indexing and so fourth.

---or---

2. check out vlite and make your own cut down vista IF [2.5] you are happy to make a slipstreamed install CD and [2.9x] you don't mind reinstalling your OS fairly regularly (Say).

I have myself gone back to XP since I am more used to it and so fourth for now.

You see, I have a 3 GHz hyper threading P4 processor and it rates my processor as 4.2. The Pentium M single core will have an experience Index rating of below 3 which is not worth using Vista, unless you prefer on using Vista Basic GUI. Vista recommends Dual Core CPUs. A 1.6 GHz Dual Core CPU will have a better rating than mine. If I were you I'd stick with XP.

Last time I ran the Windows Experience Index before I wiped the partition yesterday, I'm pretty sure my CPU had a 3.x rating. I'll get the official stats when I re-install later today or tomorrow.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      592
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!