DX11 revealed - fully compatible with DX10 hardware!


Recommended Posts

Comparing OpenGL to DirectX is like comparing a Car to a Car Engine. OpenGL stands for "Open Graphics Library", the X in DirectX isn't just to sound good, it's because DirectX has a LOT of parts to it - DirectAudio, DirectInput, Direct3D, etc.

Well, yeah it was. That's why DX11 was supposed to be named WGL or WGF(don't remember) to indicate it's an entirely new graphics library and not DX(thoguh it support DX9 through a inbuilt sandbox/emulation), but it was dropped so that people would recognize what it was and they planed to just name DX11 WGL/WGF2 instead guss they're just sticking with DX now.

but since DX10 DirectX is no just Direct3D actually, the sound and input parts are no longer there. input is split into it's separate system wich was added allready with the xbox controller and GFW for XP. and DirectAudio is replaced with OpenAL since Vista, and theat new game audio thing they're working on.

As for openGL gaes, yeah id is pretty much the only ones that really stuck to it, but I seem to remember even id saying their next engine will at the very least be both DX and OGL or just DX. Though I may be wrong was a long time since I bothered paying any attention to id.

If anyone at Microsoft had one bit of sense, DirectSound would be reimplemented to complement XACT, not deprecated, and DX11 backported to XP. PC gaming for DX10 and beyond is dead until this impasse is dealt with.

Yeah, the removal of the HAL is such a pain in the ass. Can't stand it.

** That being said, I run Vista on my main PC. I just wish I still had DirectSound hardware acceleration. That's my biggest complaint about Vista.

If anyone at Microsoft had one bit of sense, DirectSound would be reimplemented to complement XACT, not deprecated, and DX11 backported to XP. PC gaming for DX10 and beyond is dead until this impasse is dealt with.

DirectSound isn't compatible with the new audio system in Vista.

Sometimes to redesign a new and much better audio system, you just have to throw some old **** away, DirectSound was one of them. and I'd rather have the new audio syste than DirectSound and the Creative EAX monopoly.

I do have Vista Home Premium 32 bit SP1 installed and

my system reports DirectX 9 only, thats why I asked.

Thats odd... because my fresh copy of vista off of a retail cd (just installed yesterday actually... had to reformat) also reports DX9. However I only have a card that supports 9 and not 10.
Yeah, I think that's why my laptop (w/Vista) reports DX9.

For all you three guys: I hope you're aren't checking DirectX versions using the control panel item; that CPL is outdated by at least four years. Example:

post-99705-1216838913_thumb.png

This is what it reports on a PC with a 8800 GT.

On my laptop with a DX9 7400 Go, it also states DirectX 10 in dxdiag.

In any case, Vista users should have nothing to worry about. You still get all the updated DirectX 9 runtimes released every couple of months, plus DirectX 10 support if you have a DX10 GPU, and whatever software updates they do to DX10 and now DX11.

edit: stated already :argh:

I'm confused...

DX10.1 have features that DX10 doesn't have

DX11 runs on both DX10.1 and DX10 hardware

DX11 is fully backward compatible with DX10.1 and DX10

... wouldn't that mean that the DX11, running on DX10 hardware, would include the DX10.1 features DX10 is missing?

I'm confused...

DX10.1 have features that DX10 doesn't have

DX11 runs on both DX10.1 and DX10 hardware

DX11 is fully backward compatible with DX10.1 and DX10

... wouldn't that mean that the DX11, running on DX10 hardware, would include the DX10.1 features DX10 is missing?

AFAIK DX10.1 runs on DX10 cards.

Yes it does, DX10.1 makes features mandatory that DX10 already supports, so all DX10 cards out support DX10.1.

That's misleading. All DX10 cards support DX10.1, but can't necessarily run all of the features.

That is completely stupid, oh here is 10.1 but you cant have that and that.

err, not it's not, would you rather DX10.1 games wouldn't run at all on your 10 hardware rather than just disablign a few new features ?

it's the way DX has operated for all time untill DX10 wich was a complete rewrite of the code and tech.

Long as you have a DX10 card you can run any DX games though 10.1 and 11 games in the future won't be able to show the features your hardware doesn't support. rather than not playing at all.

I would've been very surprised if it turned out to be a 7 exclusive.

Yeah, the only friggin reason dx10 is vista only is because it heavily relies and is built for the new driver model in visata, they would have to do a lot of work and possibly redesign XP's driver model or redesign dx 10 to get it to work. Windows 7 uses the same driver model, it will not be windows 7 exclusive. People need to stop spreading misinformation like that.

If anyone at Microsoft had one bit of sense, DirectSound would be reimplemented to complement XACT, not deprecated, and DX11 backported to XP. PC gaming for DX10 and beyond is dead until this impasse is dealt with.

DX10 won't and can't be backported to XP without changing major parts of the XP driver system.

XP is dead and isn't getting major redesigns at this point in it's life span, people have to understand that and move on.

^ XP is dead? Sure it is, on the year 2014

Why move on? If it works, why fix it? I'll let you move on :rofl:

It requires Vista? I'll skip, I can live with DX9 for a while.

Vista failed because so many people were trashing it. So much so, that to this day people are scared about getting a new computer with vista.

Its sad really.

No. It failed, because.... hmm no I better not go into that, we have enough of those threads already :rofl: But, I have to add to your "it's sad really" comment, because it's not sad. Windows M.E., now that was sad! Microsoft just failed to deliver with Vista. It's that simple. Average joes who buy computers at retailers, they don't care. They get whatever OS that is on their computer and they use it. It's the computer "savvyists" (us) who complain because we know there's no compelling reason to upgrade a perfectly stable XP system to Vista.

Unless DX11 takes off because DX10 didn't, I don't see any Vista features that would make a gamer upgrade from XP to Vista.

Edited by revvo

I use the terminology "dead", because it's no longer the main product, it's only getting security patches and extended support.

And of course, DirectX 9 comes with Vista, so it's not like you're losing that if you upgrade.

Sorry to be a spoil sport but is anyone else starting to think DX11 is just a rebranding of DX10 to try and make it successful?

Did you even read the article?

They're talking about some pretty huge GPGPU stuff... which will finally be useful as it won't be vendor-specific.

If anyone at Microsoft had one bit of sense, DirectSound would be reimplemented to complement XACT, not deprecated, and DX11 backported to XP. PC gaming for DX10 and beyond is dead until this impasse is dealt with.

DX10 (and presumably all later versions) cannot be backported to XP.

Not without literally turning XP into Vista. So you're basically saying that Microsoft should give away Vista.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft admits one of the most crucial Outlook features is currently broken by Sayan Sen Microsoft is making some decent progress when it comes to Windows 11. Recently we have confirmed reports of some rather useful improvements landing in the next version of the OS, 26H2, wherein GPU driver TDR crashes may finally be fixed, plus the company is also allowing users to disable web content on the Search. On the Outlook front though things have not been so rosy. Last month in May we reported several problems affecting basic functionalities on the app. These included a problem where documents would open blank or corrupt themselves. Following that, Quick Steps, a very useful feature, would no longer work correctly, and finally, Microsoft acknowledged a problem wherein images would fail to load up properly inside the email. Microsoft had resolved those bugs later and almost exactly a month after we reported on them, the company has now admitted a new similarly basic issue, this time on Macs. Users recently started noticing that Outlook would no longer display email threads properly as the original message itself was not displayed. An affected user Tsoumpas, C (ngmb) nicely described the problem in a forum post they made on Microsoft's site. They wrote: "Description of the issue: After updating Outlook for Mac [Version 16.110 (26061317)] on 18/6/2026, replying to any email no longer includes the original message in the reply window. Prior to the update, replies correctly contained the original email text below my response. Expected behavior: The original message should be included in the reply, as in previous Outlook versions and according to the configured reply settings. Actual behavior: The reply window contains only a blank composition area (or only my response), with none of the original email text included." Obviously this must be a highly frustrating for users as noted by several in that thread. The post, at the time of writing, has also been upvoted by more than 40 users indicating that is a fairly widespread bug. Thankfully Microsoft seems to have acknowledged the problem right around that time as it opened a new issue on its official website. In the support article, the company recommends switching to Outlook for Mac from the legacy app, where the problem appears to be happening.
    • PotPlayer 260622 by Razvan Serea PotPlayer is an extremely light-weight multimedia player for Windows. It feels like the KMPlayer, but is in active development. Supports almost every available video formats out there. PotPlayer contains internal codecs and there is no need to install codecs manually. Other key features include WebCam/Analog/Digital TV devices support, gapless video playback, DXVA, live broadcasting. Distinctive features of the player is a high quality playback, support for all modern video and audio formats and a built DXVA video codecs. A wide range of subtitles are supported and you are also able to capture audio, video, and screenshots. A comprehensive video and audio player, that also supports TV channels, subtitles and skins. Its been described on the Internet as The KMPlayer redux, and it pretty much is. Daum PotPlayer 260622 (1.7.22963) changelog: Removed Kakao TV Added pause function when navigating via the navigation bar Significantly improved internal stability Fixed an issue where colors appeared strange during RGB24 processing Improved playback for some HTTP streams Improved sync processing for the built-in audio renderer Fixed an issue where certain MP4 files behaved abnormally during playback Download: Daum PotPlayer (64-bit) | 54.7 MB (Freeware) Download: Daum PotPlayer (32-bit) | 61.1 MB View: Daum PotPlayer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.44 is out.
    • Speccy 1.34.084 by Razvan Serea Speccy will give you detailed statistics on every piece of hardware in your computer. Including CPU, Motherboard, RAM, Graphics Cards, Hard Disks, Optical Drives, Audio support. Additionally Speccy adds the temperatures of your different components, so you can easily see if there's a problem! Processor brand and model Hard drive size and speed Amount of memory (RAM) Graphics card Operating system At first glance, Speccy may seem like an application for system administrators and power users. It certainly is, but Speccy can also help normal users, in everyday computing life. If you need to add more memory to your system, for example, you can check how many memory slots your computer has and what memory's already installed. Then you can go out and buy the right type of memory to add on or replace what you've already got. Download: Speccy 1.34.084 | 20.5 MB (Freeware) View: Speccy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • ImgDrive 2.2.7 by Razvan Serea ImgDrive is a CD/DVD/BD emulator - a tool that allows you to mount optical disc images by simply clicking on them in Windows Explorer. If you have downloaded an ISO image and want to use it without burning it to a blank disc, ImgDrive is the easiest way to do it. ImgDrive features: One-click mounting of iso, cue, nrg, mds/mdf, ccd, isz images Runs on 32-bit and 64-bit Windows versions Mount ape, flac, m4a, wav, wavpack, tta file as AUDIO CD (16-bit/44.1kHz) Mount a folder as DVD/BD Mount images in command line Does not require rebooting after installation Support up to 7 virtual drives at the same time Support multi session disc image (ccd/mds/nrg) A special portable version is available Translated to more than 10 languages Support File Type: .ccd - CloneCD image files .cue - Cue sheets files of ape/flac/m4a/tta/wav/wv/bin .iso - Standard ISO image files .isz - Compressed ISO image files .nrg - Nero image files .mds - Media descriptor image files ImgDrive 2.2.7 changelog: Added command line parameter to set number of drives Added AACS-Auth support for HD DVD Bumped kernel driver version to 2.2.7 Download: ImgDrive 2.2.7 | 692 KB (Freeware, paid upgrade available) Download: ImgDrive Portable 535 KB View: ImgDrive Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!