PS3 HDD Upgrade. 5400 vs 7200


Recommended Posts

I started to strip a couple of screws when I swapped in my 160GB drive.

Question though. Did anyone else have to reinstall a firmware from an external device when they swapped their drive? I did, but I saw no mention of it in any guides I read. Also, IIRC, I had to set up my wireless settings again. But it only took a minute so that wasn't a problem. I'm using a 40GB UK model. Has a different drive bay to those I've seen too.

Not that I have a PS3 yet but when I do and should I decide to upgrade the drive I'll likely go a reasonably priced 7200 drive. I know they cost extra but if down the line I decide to swap out the drive again at least it'll serve me well elsewhere.

I started to strip a couple of screws when I swapped in my 160GB drive.

Question though. Did anyone else have to reinstall a firmware from an external device when they swapped their drive? I did, but I saw no mention of it in any guides I read. Also, IIRC, I had to set up my wireless settings again. But it only took a minute so that wasn't a problem. I'm using a 40GB UK model. Has a different drive bay to those I've seen too.

I almost stripped 2 screws, as mentioned in my post the screws were the hardest part of the setup imo.

Yup I also had to install the new firmware from an external device, but then again I didn't do a proper back up from the machine, just copied single files. I'm unaware if having done the backup mode also copies firmware to the appropriate drive/disk. Again though the only hard part in that was realising you can't just put it on the root directory and had to be in a certain place :)

Out of interest how much space do you have to use with the 320gb drives. On my PS3 it only shows the drive as being 298gb and once formatted I have 263gb to use. Is this the same as others who have fitted a 320gb drive?

Thanks, AStaley.

I bought an external drive and use TVersity for everything now. Its pretty nice.

yeah.... that's what I considered doing originally... but I hate the idea of having another device next to my TV and if I end up buying stuff from the video store... I'd like to keep in on the PS3

Out of interest how much space do you have to use with the 320gb drives. On my PS3 it only shows the drive as being 298gb and once formatted I have 263gb to use. Is this the same as others who have fitted a 320gb drive?

Thanks, AStaley.

298gb is actually correct for a 320gb drive. It's the difference between the 'calculated space' and 'effective space'

'Calculated Space' is done by using 1,000 as the base number (1,000 bytes = 1 kb)... but the 'effectivespace' (aka: the REAL space) is done by using base 1024 (1,024 bytes = 1 kb).

so if you do the math... and transform 320gb into bytes using the 'calculated space' method... that give you 320,000,000,000 bytes... now turn that into gb but using the 'effective space'... that you'll end up with 298. :yes:

now as of to why after you formatted it when down to 263gb... I have no clue... it might be a partition that the PS3 puts on the drive for thinks like the boot sector, OS and stuff of that nature.

edit:

Ignore my above post, found my answer. Seems the PS3 reserves a percentage of the drive for system use.

lol.. after spending about 10min typing up an answer ;)

oh well

so I got my 320gb drive today and installed it practically with out a hitch.

the only issue I ran into was when I was restoring my data... it got to 1% the just froze. HDD access light on the PS3 nor the external drive were flashing... everything just died for a bit. So I just manually power-cycled the PS3 and re-started the process. No lost data what so ever :D

oh also.. that's DirtyLarry for the screw warning :yes: funny thing is that a podcast I was listening to this morning on my way to work was talking about the same thing. To quote them... "be care when unscrewing the drive, since the PS3 screws are made out of paper" :p

How easy is it to backup? I've just bought a 250GB Seagate Momentous 5400.4 because I'm using the 7200rpm version (120GB) in my laptop and it works great.

I don't have any external drives spare to format in FAt32 for the backup but I do have a 4GB usb stick that I can use.

What critical things should I backup? I can re-download games I bought on PSN again can't I?

the only 'critical' stuff are the game saves and game data.

everything else can be re-downloaded (games, demos, videos, add-ons, etc)

I'm pretty sure that if you delete all of those and just keep the games save and game data folders... the backup will be really really small, since the backup option pulls in all the videos, music, themes and pictures that you have on your PS3.

Yeah, I was fortunate enough to have a 300 GB external HD hanging around that I could format to FAT, so I did not have to deal with it.

It is fair enough and should be pointed out you need something formatted in the FAT format to back up your files though, as when I tried my first external HDD in, it did not work since it was not formatted as that.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Same Internet Archive seemed to grab the new version https://web.archive.org/web/20...d/Setup_MakeMKV_v1.18.4.exe Here's the link to an additional file it periodically downloads https://web.archive.org/web/20260213092148/https://www.makemkv.com/sdf.bin I think update's keys, etc. To manually trigger this update, put the sdf.bin file in the root of where the program is installed. When you launch the program it will pick up the file and import it. Typically put it here: C:\Program Files (x86)\MakeMKV\sdf.bin
    • Windows 11 KB5094126, KB5093998 bugging out Office apps but it may not be Microsoft's fault by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. Although the tech giant did not acknowledge any major problems, some users online reported various issues ranging from OneDrive and Dropbox access problems, BitLocker recovery lockouts, to blue screens and BSODs. You can read about them in this dedicated piece. While there is still no confirmation about those problems from Microsoft the company has admitted to another bug which we did not report on. The tech giant has confirmed it has received reports of an issue in which certain third-party applications may be unable to launch Microsoft Office apps or open Office documents after installing the Patch Tuesday. This affects both Windows 11 as well as Windows 10. The company says the problem impacts a subset of applications that rely on OLE (Object Linking and Embedding) automation to communicate with Microsoft Office programs. According to Microsoft, affected scenarios involve third-party software attempting to open Office applications or documents from within their own interface. In such cases, the Office program may fail to launch altogether, or the requested document may not open. Oddly there may not be any error message, which probably makes the issue difficult to diagnose. The bug affects several Office products, including Word, Excel, PowerPoint, Access, and other apps in the Microsoft Office suite when they are launched through the affected software. These include tax and accounting software such as CCH Engagement and Workpaper Manager, dental practice management solutions like Dentrix and Softdent, as well as the popular research and reference management tool Zotero. Microsoft adds that other applications using similar Office integration methods could also experience the same problematic behavior. To understand the issue it is important to look at OLE, the Microsoft technology involved. OLE allows different applications to work together and share data, while its Automation feature lets one program control another. Thus this enables third-party software to launch Microsoft Office apps, open documents, and perform tasks automatically without requiring users to switch between programs. Because many accounting, healthcare, research, and business applications rely on OLE automation to interact with Word, Excel, PowerPoint, and other Office apps, any disruption can break those workflows. As a result, affected software may be unable to open Office documents or launch Office applications even though the programs themselves continue to work normally. At the moment the company has not provided a permanent fix though it has confirmed that engineers are actively working on a resolution, which will be delivered through a future Windows update. As such additional details will be shared once more information becomes available. In the meantime, Microsoft recommends a simple workaround for affected users whic is to open the Office application or document directly rather than launching it through the third-party program. For enterprise customers and organizations managing larger deployments, Microsoft says an additional mitigation is available. Admins experiencing the problem on their managed devices are advised to contact Microsoft Support for business to obtain and apply the workaround.
    • It saddens me when cars are such dull colours now. Mine is bright metallic blue and I absolutely adore it for standing out in contrast to that depressing backdrop of traffic.
    • Sparkle 2.20.0 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.0 changelog: Debloat Tweak has animated border New homepage loading UI New Tweak Modal (Markdown Supported) Refactored GPU Detection Added Tests with vitest Added foobar2000 to apps Added Localsend to apps Updated Modal Styles Added styles for disabled inputs Added Animated Border to debloat-windows tweak Bumped dependencies Refactor System info logic for speed Tweak info modals now support Markdown Added Clear System info cache to settings Redesigned Home Page Loading UI Changed Some Icons around the app Download: Sparkle 2.20.0 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • lol it was a typo, fixed! haha imagine an actual 4TB Gen4 NVMe for $40 in 2026
  • Recent Achievements

    • Reacting Well
      Dys Topia earned a badge
      Reacting Well
    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      88
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!