Recommended Posts

I was sitting watching TV the other day and this ad comes on featuring Samual L Jackson, toting Virgin Media's "Mother of all Broadband" fibre optic service. I was curious so I did some digging to find that the broadband is not fibre optic at all - it's merely their own internal delivery system and that they're still using the Copper Co-Ax to deliver it to the house. In which case - how on earth can they advertise it as Fibre Optic broadband!? They might as well say they are fibre optic but deliver the service via old 56k dialup (not quite but it's a similar deal).

Promotional Page - http://allyours.virginmedia.com/sites/hatetowait/index.html

What are your thoughts on this?

post-33944-1216971640_thumb.jpg

Link to comment
https://www.neowin.net/forum/topic/651308-virgin-media-fibre-optic-claims/
Share on other sites

I was sitting watching TV the other day and this ad comes on featuring Samual L Jackson, toting Virgin Media's "Mother of all Broadband" fibre optic service. I was curious so I did some digging to find that the broadband is not fibre optic at all - it's merely their own internal delivery system and that they're still using the Copper Co-Ax to deliver it to the house. In which case - how on earth can they advertise it as Fibre Optic broadband!? They might as well say they are fibre optic but deliver the service via old 56k dialup (not quite but it's a similar deal).

Promotional Page - http://allyours.virginmedia.com/sites/hatetowait/index.html

What are your thoughts on this?

not true at all , i have fibre to the door and im with virgin not all of virgin has fibre to the door but alot do , it all depends what area you are in id say at least 70% is fibre to the door , even those who have coaxle still have fibre to the cabinet so their advertising is still true , if it wasn't it would have been pulled by the advertising standards agency either way coaxle to the door or fibre to the door you still get faster speeds than old crappy telephone wire :)

^ what he said.

the matter was already looked into by the ASA who cleared them of reports of lying to customers.

and as a vergin media customer while i would prefer the whole network to be fibre optic up to my house, the last few metres doesnt bother me if it works as advertised.

if anything i would be complaining about them halfing speeds after so much use, now that is annoying.

So surely it's not long til you guys get 100Mbps offered to you ;)

I'm slightly bitter that I live in a fully cabled area - however I can only receive the analogue TV services and no cable broadband due to Virgin media's reluctancy to perform whatever upgrade they need to.

I'm left with no other option but Sky - eek - actually I have to say they've been pretty good so far.

Anyway, so are the fibre optics only available in new areas or are they sticking them in older cabled areas too?

So surely it's not long til you guys get 100Mbps offered to you ;)

I'm slightly bitter that I live in a fully cabled area - however I can only receive the analogue TV services and no cable broadband due to Virgin media's reluctancy to perform whatever upgrade they need to.

I'm left with no other option but Sky - eek - actually I have to say they've been pretty good so far.

Anyway, so are the fibre optics only available in new areas or are they sticking them in older cabled areas too?

im in an area that used to belong to cable and wireless and they forsaw to install fibre to the door and then it was bought out by ntl who then merged with telewest to create virgin so it all depends on what virgin do and what area layed fibre to the door before ntl/telewest/virgin took over :)

Virgin have already announced plans to have 200Mbps by 2012 :woot:

Sounds good but I'm sure I read something about BT laying fibre optic cable somewhere - so hopefully we won't have a monopolised market in the ridiculously fast broadband area and we'll see some good consumer beneficial price wars! I'm on ADSL but live about 3km from the exchange so only receive 4Mbps of the possible 16mbps. Bring on Fibre-optic!

Sounds good but I'm sure I read something about BT laying fibre optic cable somewhere - so hopefully we won't have a monopolised market in the ridiculously fast broadband area and we'll see some good consumer beneficial price wars! I'm on ADSL but live about 3km from the exchange so only receive 4Mbps of the possible 16mbps. Bring on Fibre-optic!

Yeah was an advert that BT was planning to lay fibre optic all over the country i think by 2012 and virgin media said why wait we've got it now.

im in an area that used to belong to cable and wireless and they forsaw to install fibre to the door and then it was bought out by ntl who then merged with telewest to create virgin so it all depends on what virgin do and what area layed fibre to the door before ntl/telewest/virgin took over :)

I'm also in an ex C&W area, and I certainly don't have Fibre to the door :(

not true at all , i have fibre to the door and im with virgin not all of virgin has fibre to the door but alot do , it all depends what area you are in id say at least 70% is fibre to the door , even those who have coaxle still have fibre to the cabinet so their advertising is still true , if it wasn't it would have been pulled by the advertising standards agency either way coaxle to the door or fibre to the door you still get faster speeds than old crappy telephone wire :)

70%!!! LOL, you just made up that number. The number is actually very low, new house builds generally have fibre installed and inner city centres and places like that, obviously some areas will too, usually decided by councils and also virgin/telewest. I couldn't put a figure on it as i dont know but it would be VERY low, around 15% or so.

Cant believe they are letting virgin advertise the broadband as fibre when the majority of people dont have fibre to their door, i'm thinking a govt official is getting a nice back hand?r.

Sounds good but I'm sure I read something about BT laying fibre optic cable somewhere - so hopefully we won't have a monopolised market in the ridiculously fast broadband area and we'll see some good consumer beneficial price wars! I'm on ADSL but live about 3km from the exchange so only receive 4Mbps of the possible 16mbps. Bring on Fibre-optic!

problem with BT is the fibre isn't going to everyone, they want to reach 40-60mbps for the people close-ish to the exchanges and fibre to 1million really close people which to me is a joke, everyone should be allowed the same speed.

I was thinking the same thing because i still have the coaxial cables coming into my house. I doubt that the number of house that have fibre optic right to the door is anywhere near 70% though. I'm assuming that it's only the newer customers that are getting it.

BT said that around 40% of the people will be able to get 40-60mbps. Thats not many for ?1.5bn. As for fibre, thats only really going to be for new builds they said with some selected areas too. Until we can get fibre we are always gunna have slow upload speed, UK isp's just dont want us to upload at all, 20mb down, 0.75mb up, just ludicrous! gimme atleast 5mb up!

My area took a while to have the exchange upgraded for adsl2+ so i reckon it will take a long time for the 40-60mb from BT. Also bt are only spending ?200m for the 1st two years of upgrading, then 1.3bn or so in the last year. So basically virtually no-one will be getting 40-60mb until 2010 onwards. The govt should just say "upgrade the network fully to fibre or we wont let you operate in the uk". 20mb down is pretty quick tbh, its just the stupid caps and speed restrictions to 5mb which is the problem because virgin trying to get as many customers as possible but dont wanna pay to upgrade the network which is FULL to capacity. Wouldnt be suprised if they make it 1000mb but throttled to 10mb during peak hours, 4gb cap and advertise it as gigabit speed.

^^ of course an ISP doesn't want to fully fibre their network, they'd be bankrupt if they did as customers refuse to pay for things they supposedly want

nah, BT calculated as being ?12bn to upgrade everything to fibre, they could carry on with current speeds and prices but add 100mb and 1000mb to speeds and charge like ?50 and ?200 a month, no-one would complain as everything would still be the same but rich people could get crazy fast broadband. Then over time lower the prices of the 100 and 1000mb, they'd recoup the investment in 5yrs or so i reckon, they could then also add multiple hd channels and a box to record 2 hd channels at once, renting 720p movies etc, they'd have loads of ways to make money with 100mb or 1000mb speeds. They want the govt to pay a big chunk tho.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      149
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!